D2_99_IBASE.TPW

#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#! File Name:   D2IBase.tpw
#! Purpose:     DCT to Interbase creation script
#! Author:      Copyright © 1999-2999 by Roberto Artigas Jr
#!              All rights reserved world wide.
#! Changes:
#! 2004.08.24   Roberto Artigas
#!  *   STRING now generates as CHAR rather than VARCHAR.
#! 2004.07.24   Roberto Artigas - Per Sean Hennessy
#!  *   Change BYTE -> CHAR generation to BYTE -> SMALLINT
#! 2004.07.10   Roberto Artigas
#!  *   Changed AUTODLL -> AUTODDL generated keyword.
#! 2004.03.05   Roberto Artigas - Per Ruben Sanchez Pena
#!  *   Corrected RELATION creation for double prefixing
#! 2004.03.03   Roberto Artigas - Per Bo Schmitz
#!  *   Changed order of DEFAULT and NOT NULL
#! 2004.02.23   Roberto Artigas - Per Ruben Sanchez Pena
#!  *   Corrected CREATE TRIGGER double prefixing
#!  *   Corrected GENERATOR for double prefixing
#!  *   Corrected GEN_ID for double prefixing
#!  *   Corrected ENUM() and replaced for CHECK(IN()).
#!  *   If values exist then used them instead of choices.
#! 2004.01.29   Roberto Artigas - Per Kelvin Chua.
#!  *   Change logic for "AUTONUMBER" generation.
#!  *   Add primary key constraint check box and code.
#!  *   Added NOTEPAD load of script for inspection.
#! 2004.01.07   Roberto Artigas - Per Kelvin Chua.
#!  *   Change AUTO_ in trigger generator to File Prefix (unique generators).
#! 2002.07.30   Jim Gambon
#!  *   Added prompt to switch FilePrefix appending "off/on"
#!  *   Added prompt to switch AutoInc Generator creation "off/on"
#!  *   Added prompt to force use of CHAR for small strings
#!  *   Added prompt to ask if VARCHARS should be one char less that DCT defined size
#!  *   Fixed CONSTRAINT name creation to be fully unique (not just unique within the table)
#! 2001.12.28   Roberto Artigas Jr
#!  *   Add double quotes back. The database has to be created with
#!      DIALECT 3 so everything matches up to the script.
#!  *   Corrected NEW.Autonumber to NEW.%NFNameAuto.
#!  *   Corrected Primary key generating DESCENDING key twice.
#!  *   Corrections spotted by Roger Truong.
#! 2001.12.18   Roberto Artigas Jr
#!  *   Remove double quotes from field name and table name to get rid of
#!      syntax(?) errors. Testing from Roger Truong.
#!      Question: Is there some option to set the double quote (") on/off?
#! 2001.11.20   Roberto Artigas Jr
#!  *   Dialect 3 needs to have the database already created.
#! 2001.10.24   Roberto Artigas Jr
#!  *   Sugestion from Bruce Johnsom FilePrefix_* to eliminate duplicates.
#! 2001.10.23   Roberto Artigas Jr
#!  *   Serious work on the relationships handling routines.
#!  *   Check option to turn off output of comments to file.
#!      If output file gets too big it seems to GPF Clarion et al.
#! 2001.10.22   Roberto Artigas Jr
#!  *   Interbase docs from http://www.ibphoenix.com/ibp_download.html#DOCS
#!      Serious work on the data type handling routines.
#! 2001.10.17   Roberto Artigas Jr
#!  *   Begin creation of this template
#!---------------------------------------------------------------------
#UTILITY(Dct2Interbase, '2004.07.24: Dictionary to Interbase script')
#!---------------------------------------------------------------------
#SHEET,HSCROLL
 #TAB('General')
  #BOXED('')
   #DISPLAY('The Interbase Script Creator.')
   #DISPLAY('Copyright 2001-2999 © by Roberto Artigas Jr.')
   #DISPLAY('All Rights Reserved World Wide.')
   #DISPLAY('')
   #PROMPT('Output: ',@S80),%OutputFile,AT(50,,130),DEFAULT(SUB(%DictionaryFile,1,LEN(%DictionaryFile)-4) & '.interbase')
   #DISPLAY('')
   #PROMPT('Create all tables? ',CHECK),%AllTables,AT(10),DEFAULT(1)
   #PROMPT('Create relations? ',CHECK),%CreateRelation,AT(10),DEFAULT(1)
   #DISPLAY('')
   #PROMPT('Create primary indexes? ',CHECK),%CreatePrimary,AT(10),DEFAULT(1)
   #PROMPT('Use CONSTRAINT for autoincrement? ',CHECK),%ConstraintAutoIncrement,AT(10),DEFAULT(0)
   #DISPLAY('')
   #PROMPT('String Character Set: ',@s40),%CharSet,AT(82,,94),DEFAULT('ISO8859_1')
  #ENDBOXED
 #ENDTAB
 #TAB('Arrays')
  #BOXED('')
   #DISPLAY('There are two ways to handle arrays:')
   #DISPLAY('')
   #DISPLAY('1) You defined a group with all the fields of the array')
   #DISPLAY('inside this group. Then you put the array OVER the')
   #DISPLAY('group. If you set up your arrays in this manner, then')
   #DISPLAY('LEAVE the checkbox bellow OFF.')
   #DISPLAY('')
   #DISPLAY('2) You define your arrays as actual fields using no')
   #DISPLAY('groups whatsoever. If you set up your arrays this way,')
   #DISPLAY('then TURN ON the checkbox bellow.')
   #DISPLAY('')
   #DISPLAY('')
   #PROMPT('I DO NOT HAVE ARRAYS OVER GROUPS. ',CHECK),%NoArrayOver,AT(10),DEFAULT(0)
   #DISPLAY('')
  #ENDBOXED
 #ENDTAB
 #TAB('Standardize')
  #BOXED('')
   #PROMPT('Generate script comments? ',CHECK),%DoComments,AT(10),DEFAULT(0)
   #DISPLAY('')
   #PROMPT('Append FilePrefix to all Table and Columns names?',CHECK),%DoPrefixAppend,AT(10),DEFAULT(0)
   #DISPLAY('This is to avoid Duplicates.'),AT(10)
   #DISPLAY('')
   #PROMPT('Create AutoIncrementing Generators and ',CHECK),%DoGeneratorCreate,AT(10),DEFAULT(1)
   #DISPLAY('Insert Triggers for all Primary Keys?')
   #DISPLAY('')
   #PROMPT('Use CHAR for small (C/P) STRINGs?', CHECK),%UseCharforSmallStr,AT(10),DEFAULT(1)
   #ENABLE(%UseCharforSmallStr)
   #PROMPT('How Small? ', @N3),%UseCharSize,AT(60,,30),DEFAULT(5)
   #ENDENABLE
   #DISPLAY('')
   #PROMPT('Reduce CSTRINGs and PSTRINGs by 1 ',CHECK),%ReduceCStringsbyOne,AT(10),DEFAULT(1)
   #DISPLAY('when creating CHAR/VARCHARS?')
   #DISPLAY('')
   #DISPLAY('')
  #ENDBOXED
 #ENDTAB
 #TAB('Select Tables')
  #BOXED('')
   #BUTTON('Script only for tables...'),MULTI(%InclTables,%InclTable),AT(,,170,140),INLINE
    #PROMPT('Table: ', FROM(%FILE)),%InclTable,REQ,DEFAULT('')
   #ENDBUTTON
  #ENDBOXED
 #ENDTAB
#ENDSHEET
#BOXED(''),HIDE
   #PROMPT('Force BOOLEAN validation to [Y,N] choices? ',CHECK),%ForceBoolYN,AT(10),DEFAULT(0)
   #PROMPT('Force INLIST validation to no default? ',CHECK),%ForceListNoDef,AT(10),DEFAULT(0)
   #PROMPT('Fixed size for all STRINGS < 256 bytes? ',CHECK),%FixedStr255,AT(10),DEFAULT(0)
#ENDBOXED
#!---------------------------------------------------------------------
#DECLARE(%NFileUser)                    #! File user options [RASQL]
#DECLARE(%NFileOpt1)                    #! File option 1 [NO]
#DECLARE(%NFileOpt2)                    #! File option 2
#DECLARE(%NFileOpt3)                    #! File option 3
#DECLARE(%NFileOpt4)                    #! File option 4
#!
#DECLARE(%NFieldUser)                   #! Field user options [RASQL]
#DECLARE(%NFieldOpt1)                   #! Field option 1 [NO]
#DECLARE(%NFieldOpt2)                   #! Field option 2 [<Field Type>]
#DECLARE(%NFieldOpt3)                   #! Field option 3
#DECLARE(%NFieldOpt4)                   #! Field option 4
#!
#DECLARE(%NKeyUser)                     #! Key user options [RASQL]
#DECLARE(%NKeyOpt1)                     #! Key option 1 [NO]
#DECLARE(%NKeyOpt2)                     #! Key option 2
#DECLARE(%NKeyOpt3)                     #! Key option 3
#DECLARE(%NKeyOpt4)                     #! Key option 4
#!
#DECLARE(%NRelationUser)                #! Relation user options [RASQL]
#DECLARE(%NRelationOpt1)                #! Relation option 1 [NO]
#DECLARE(%NRelationOpt2)                #! Relation option 2
#DECLARE(%NRelationOpt3)                #! Relation option 3
#DECLARE(%NRelationOpt4)                #! Relation option 4
#!
#DECLARE(%NFileName)                    #! File Name
#DECLARE(%NFilePrefix)                  #! File Prefix                      #! RAS.2004.01.07
#DECLARE(%NFileType)                    #! TYPE=???
#DECLARE(%NFileRowFormat)               #! ROW_FORMAT=???
#!
#DECLARE(%NFieldPKey)                   #! Field is Primary Key?
#DECLARE(%NFieldLine)                   #! Field line
#DECLARE(%NFieldName)                   #! Field Name
#DECLARE(%NFieldTSql)                   #! Field SQL type
#DECLARE(%NFieldType)                   #! Field type
#DECLARE(%NFieldDef)                    #! Field default
#DECLARE(%NFieldValue)                  #! Filed values                     #! RAS.2004.02.23
#DECLARE(%NFieldAuto)                   #! Field AUTO_INCREMENT
#DECLARE(%NFieldNN)                     #! Field NOT NULL
#DECLARE(%NFieldSize  ,LONG)            #! Field decimal size
#DECLARE(%NFieldDec   ,LONG)            #! Field decimal places
#DECLARE(%NFNameAuto)                   #! Field Name Auto Increment
#DECLARE(%NFNamePrimary)                #! Field Name Primary Key
#!
#DECLARE(%NKeyName)                     #! Key name
#DECLARE(%NKeyFields)                   #! Key building line
#DECLARE(%NKeyField)                    #! Key field current
#DECLARE(%NKeyFieldCount)               #! Number of key fields
#DECLARE(%PrimaryCount)                 #! Primary key exists
#DECLARE(%SecondaryCount)               #! Secondary key exists
#DECLARE(%AutoIncrementCount)           #! Auto-Increment key exists
#!
#DECLARE(%NRelateItem)                  #! Working item number
#DECLARE(%NRelateCount)                 #! Total items to work
#DECLARE(%NRelateComma)                 #! Number of commas
#DECLARE(%NRelateFile)                  #! Related file
#DECLARE(%NRelateField1)                #! Related origin field
#DECLARE(%NRelateField2)                #! Related relate field
#DECLARE(%RelationField1Count)          #! Count of origin file key items
#DECLARE(%RelationField2Count)          #! Count of relate file key items
#DECLARE(%RelationField1)               #! The origin file keys
#DECLARE(%RelationField2)               #! The relate file keys
#DECLARE(%RelationUpdate)               #! ON UPDATE ?
#DECLARE(%RelationDelete)               #! ON DELETE ?
#!
#DECLARE(%nLoc1       ,LONG)            #! Location 1
#DECLARE(%nLoc2       ,LONG)            #! Location 2
#DECLARE(%CStringLen)                   #! Length of types shortened by one
#DECLARE(%LastField)                    #! Last field processed
#DECLARE(%InnerGroup)                   #! Inner group level processed
#DECLARE(%FieldComma)                   #! Number of fields - 1
#!
#DECLARE(%ChoiceLine)                   #! Build ENUM field type line
#DECLARE(%ChoiceComma)                  #! Count ENUM values - 1
#!
#DECLARE(%DocVar)                       #! Documentation Variable
#DECLARE(%TableCount, 0)                #! Count of tables
#DECLARE(%AutoCount, 0)                 #! Count of Auto-Increment Keys
#DECLARE(%PKeyCount, 0)                 #! Count of primary keys (From Keys)
#DECLARE(%PKeyOption, 0)                #! Count of primary keys (From Options)
#DECLARE(%KeyOthers, 0)                 #! Count of secondary keys
#DECLARE(%KeyCount, 0)                  #! Count of all keys combined
#DECLARE(%FieldCount, 0)                #! Count of fields
#DECLARE(%RelCount, 0)                  #! Relationship Counts
#DECLARE(%FieldTable),MULTI,UNIQUE      #! List of unique fields
#DECLARE(%FieldUnique, 0)               #! Count of unique fields
#!
#DECLARE(%TheComment)                   #! Declare comment line
#DECLARE(%TheDate)                      #! Display current date
#DECLARE(%TheTime)                      #! Display current time
#SET(%TheDate,FORMAT(TODAY(),@D010))    #! Set current date
#SET(%TheTime,FORMAT(CLOCK(),@T06))     #! Set current time
#!
#DECLARE (%FldArray)                    #! Created field name from array
#DECLARE (%FD1S)                        #! Number for dimension 1
#DECLARE (%FD2S)                        #! Number for dimension 2
#DECLARE (%FD3S)                        #! Number for dimension 3
#DECLARE (%FD4S)                        #! Number for dimension 4
#DECLARE (%DimCount   ,LONG)            #! Number of dimensions
#DECLARE (%FD1I       ,LONG)            #! Looping in Dimension 1
#DECLARE (%FD2I       ,LONG)            #! Looping in Dimension 2
#DECLARE (%FD3I       ,LONG)            #! Looping in Dimension 3
#DECLARE (%FD4I       ,LONG)            #! Looping in Dimension 4
#DECLARE (%FD1L       ,LONG)            #! Set to %FieldDimension1
#DECLARE (%FD2L       ,LONG)            #! Set to %FieldDimension2
#DECLARE (%FD3L       ,LONG)            #! Set to %FieldDimension3
#DECLARE (%FD4L       ,LONG)            #! Set to %fieldDimension4
#!---------------------------------------------------------------------
#DECLARE(%DictName)                     #! Dictionary Name No Extension
#SET(%nLoc1,INSTRING('\',%DictionaryFile,1,1))
#LOOP,WHILE(%nLoc1)
  #SET(%nLoc2,%nLoc1)
  #SET(%nLoc1,INSTRING('\',%DictionaryFile,1,%nLoc1+1))
#ENDLOOP
#SET(%DictName,UPPER(SUB(%DictionaryFile,%nLoc2+1,LEN(%DictionaryFile)-%nLoc2-4)))
#!---------------------------------------------------------------------
#DECLARE(%LFieldInKey),MULTI,UNIQUE     #! Field list that are used in keys
#DECLARE(%IFieldInKey)                  #! Field item to search for in list
#DECLARE(%LFieldInKeyCount)             #! How many fields are in keys?
#FREE(%LFieldInKey)
#FOR(%File)
  #IF(ITEMS(%Key))
    #FOR(%Key)
      #FOR(%KeyField)
        #ADD(%LFieldInKey,%KeyField)
      #ENDFOR
    #ENDFOR
  #ENDIF
#ENDFOR
#SET(%LFieldInKeyCount,ITEMS(%LFieldInKey))
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#INSERT(%ClarionReservedWords)
#INSERT(%SqlReservedWords)
#FOR(%ClarionWordList)
  #ADD(%SqlWordList,%ClarionWordList)
#ENDFOR
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#SET(%TableCount, 0)                    #! Count of tables
#SET(%AutoCount, 0)                     #! Count of Auto-Increment Keys
#SET(%PKeyCount, 0)                     #! Count of primary keys (From Keys)
#SET(%PKeyOption, 0)                    #! Count of primary keys (From Options)
#SET(%KeyOthers, 0)                     #! Count of secondary keys
#SET(%KeyCount, 0)                      #! Count of all keys combined
#SET(%FieldCount, 0)                    #! Count of fields
#SET(%RelCount, 0)                      #! Relationship Counts
#SET(%FieldUnique, 0)                   #! Count of unique fields
#!---------------------------------------------------------------------
#CREATE(%OutputFile)
#MESSAGE('The Interbase Script Creator',0)
#MESSAGE('Creating: ' & %OutputFile,1)
#!---------------------------------------------------------------------
#INSERT(%CommentHeaderBlock)

SET SQL DIALECT 3;

#!------------------------------------------!
#! RAS.2001.11.20 - Dialect 3 needs to have !
#! the database already created.            !
#!------------------------------------------!
#!#IF(%AllTables)
#!CREATE DATABASE %DictName ;
#!
#!#ENDIF
#!---------------------!
#! Dump the files here !
#!---------------------!
#FOR(%File)
  #SET(%nLoc1,INSTRING('RASQL(',%FileUserOptions,1,1))
  #SET(%nLoc2,INSTRING(')',%FileUserOptions,1,%nLoc1))
  #SET(%nFileUser,UPPER(SUB(%FileUserOptions,%nLoc1,%nLoc2)))
  #!SET(%NFileUser,UPPER(EXTRACT(%FileUserOptions,'RASQL')))
  #SET(%NFileOpt1,EXTRACT(%NFileUser,'RASQL',1))
  #SET(%NFileOpt2,EXTRACT(%NFileUser,'RASQL',2))
  #SET(%NFileOpt3,EXTRACT(%NFileUser,'RASQL',3))
  #SET(%NFileOpt4,EXTRACT(%NFileUser,'RASQL',4))
#!%NFileUser, %NFileOpt1, %NFileOpt2, %NFileOpt3, %NFileOpt4
  #!-------------------------------------------------------------!
  #! The first option RASQL(NO) controls if a file is processed. !
  #!-------------------------------------------------------------!
  #IF(SUB(%NFileOpt1,1,1)='N')
    #CYCLE
  #ENDIF
#!
  #CASE(%FileType)
  #OF  ('VIEW')
  #OROF('ALIAS')
      #CYCLE
  #ENDCASE
#!
  #CASE(%FileDriver)
    #OF('ASCII')
  #OROF('BASIC')
  #OROF('DOS')
      #CYCLE
  #ENDCASE
#!
  #IF(%AllTables = 0)
    #FIND(%InclTable,%File)
    #IF(%InclTable = '')
      #CYCLE
    #ENDIF
  #ENDIF
#!
  #MESSAGE('Table generation of: ' & %File,2)
  #SET(%TableCount, %TableCount + 1)
  #SET(%NFieldPKey,UPPER(%FilePrefix) & '_PK')                  #! PK Naming Convention
#!
  #SET(%NFileName,%File)                                        #! This is the name
  #SET(%NFilePrefix,%FilePrefix)                                #! RAS.2004.01.07
  #IF(%DoPrefixAppend)                                          #! JMG.2002.07.30
    #SET(%NFileName,%FilePrefix & '_' & %File)                  #! RAS.2001.10.24
  #ENDIF                                                        #! JMG - 2002.07.30
  #SET(%SqlWordItem, UPPER(%NFileName))                         #! Set up search of
  #FIND(%SqlWordList, %SqlWordItem)                             #! SQL reserved words
  #IF(%SqlWordList)                                             #! Found? Yes! We add
    #SET(%NFileName, %NFileName & '_')                          #! trailing underscore
  #ENDIF                                                        #! to get it through
#!
  #IF(%DoComments)
    #CALL(%CommentBegin)
    #SET(%TheComment,'File: ' & %File & '(' & %FilePrefix & ') - ' & %FileDescription)
    #CALL(%OutputComment,%TheComment)
  #ENDIF
  #!---------------------------------------------------------------------!
  #! RAS.2001.09.09 - Process key to detect posible field containing the !
  #! auto-increment attribute. Document here and add to line later.      !
  #!---------------------------------------------------------------------!
  #! RAS.2001.10.21 - Please note that in Interbase the primary field is !
  #! allways auto increment. So If you have a primary key and the back   !
  #! end is going to take care of the auto incrementing portion, you're  !
  #! going to fake the generation of the back end SQL correctly.         !
  #!---------------------------------------------------------------------!
  #SET(%NFNameAuto,'')
  #SET(%NFNamePrimary,'')
  #SET(%AutoIncrementCount,0)
  #IF(ITEMS(%Key))
    #FOR(%Key)
      #IF(%KeyPrimary)
        #FOR(%KeyField)
          #SET(%NFNamePrimary, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
        #ENDFOR
        #IF(%DoPrefixAppend)                                        #! JMG - 2002.07.30
          #SET(%NFNamePrimary,%FilePrefix & '_' & %NFNamePrimary)   #! RAS.2001.10.24
        #ENDIF                                                      #! JMG - 2002.07.30
        #SET(%SqlWordItem, UPPER(%NFNamePrimary))                   #! Set up search of
        #FIND(%SqlWordList, %SqlWordItem)                           #! SQL reserved words
        #IF(%SqlWordList)                                           #! Found? Yes! We add
          #SET(%NFNamePrimary, %NFNamePrimary & '_')                #! trailing underscore
        #ENDIF                                                      #! to get it through
      #ENDIF
    #ENDFOR
    #!
    #FOR(%Key)
      #IF(%KeyAuto)
        #IF(%NFNamePrimary='')
          #SET(%AutoIncrementCount,%AutoIncrementCount + 1)     #! RAS.2001.09.15
          #SET(%AutoCount, %AutoCount + 1)                      #! RAS.2001.09.10
          #SET(%NFNameAuto, SUB(%KeyAuto, INSTRING(':',%KeyAuto,1,1) + 1 , 50))
          #IF(%DoPrefixAppend)                                  #! JMG - 2002.07.30
            #SET(%NFNameAuto,%FilePrefix & '_' & %NFNameAuto)   #! RAS.2001.10.24
          #ENDIF                                                #! JMG - 2002.07.30
          #SET(%SqlWordItem, UPPER(%NFNameAuto))                #! Set up search of
          #FIND(%SqlWordList, %SqlWordItem)                     #! SQL reserved words
          #IF(%SqlWordList)                                     #! Found? Yes! We add
            #SET(%NFNameAuto, %NFNameAuto & '_')                #! trailing underscore
          #ENDIF                                                #! to get it through
          #IF(%KeyPrimary)
            #IF(%DoComments)
              #SET(%TheComment,'Auto: ' & %NFNameAuto & ' (PRIMARY KEY)')
              #CALL(%OutputComment,%TheComment)
            #ENDIF
          #ELSE
            #IF(%DoComments)
              #SET(%TheComment,'Auto: ' & %NFNameAuto)
              #CALL(%OutputComment,%TheComment)
            #ENDIF
          #ENDIF
          #SET(%NFNameAuto, UPPER(%NFNameAuto))
        #ENDIF
      #ENDIF
    #ENDFOR
    #!
    #IF(%AutoIncrementCount = 0)
      #IF(%NFNamePrimary)
        #SET(%AutoIncrementCount,%AutoIncrementCount + 1)
        #SET(%AutoCount, %AutoCount + 1)
        #SET(%NFNameAuto, %NFNamePrimary)
        #IF(%DoComments)
          #SET(%TheComment,'Auto: ' & %NFNameAuto & ' (PRIMARY KEY)')
          #CALL(%OutputComment,%TheComment)
        #ENDIF
        #SET(%NFNameAuto, UPPER(%NFNameAuto))
      #ENDIF
    #ENDIF
    #!
    #IF(%AutoIncrementCount = 0)
      #SET(%TheComment,'WARNING: ' & %File & '(' & %FilePrefix & ') has no AUTO INCREMENT KEY defined.')
      #CALL(%OutputComment,%TheComment)
    #ENDIF
  #ENDIF
  #IF(%DoComments)
    #SET(%TheComment,'')
    #CALL(%OutputComment,%TheComment)
  #ENDIF
  #FOR(%Field)
    #SET(%nLoc1,INSTRING('RASQL(',%FieldUserOptions,1,1))
    #SET(%nLoc2,INSTRING(')',%FieldUserOptions,1,%nLoc1))
    #SET(%nFieldUser,UPPER(SUB(%FieldUserOptions,%nLoc1,%nLoc2)))
    #!SET(%NFieldUser,UPPER(EXTRACT(%FieldUserOptions,'RASQL')))
    #SET(%NFieldOpt1,EXTRACT(%NFieldUser,'RASQL',1))
    #SET(%NFieldOpt2,EXTRACT(%NFieldUser,'RASQL',2))
    #SET(%NFieldOpt3,EXTRACT(%NFieldUser,'RASQL',3))
    #SET(%NFieldOpt4,EXTRACT(%NFieldUser,'RASQL',4))
    #IF(SUB(%NFieldOpt1,1,1)='N')
      #CYCLE
    #ENDIF
    #CASE(%FieldType)
    #OF  ('GROUP')
    #OROF('END')
      #CYCLE
    #ENDCASE
    #IF(%DoComments)
      #SET(%DocVar, SUB(%Field, INSTRING(':',%Field,1,1) + 1 , 50))
      #SET(%TheComment,%DocVar & ALL(' ', 34 - LEN(%DocVar)) & ' ' & %FieldType)
      #SET(%TheComment,%TheComment & ALL(' ', 11 - LEN(%FieldType)) & ' ' & %FieldDescription)
      #CALL(%OutputComment,%TheComment)
    #ENDIF
    #!----------------------------------------------------------------------------------!
    #! RAS.2001.09.09 - Show values if an INLIST or BOOLEAN type of validation.         !
    #! If the designer decides to change the type of variable he/she is going to store  !
    #! these values in the database, it will be usefull to have these values documented !
    #! somewhere. This is as good a place as any.                                       !
    #!----------------------------------------------------------------------------------!
    #IF(%FieldValidation)
      #CASE(%FieldValidation)
      #OF  ('NONZERO')
      #OF  ('INRANGE')
      #OF  ('BOOLEAN')
        #IF(%DoComments)
          #SET(%TheComment,'   TRUE:  ' & %FieldTrueValue)
          #CALL(%OutputComment,%TheComment)
          #SET(%TheComment,'   FALSE: ' & %FieldFalseValue)
          #CALL(%OutputComment,%TheComment)
        #ENDIF
      #OF  ('INLIST')
        #IF(ITEMS(%FieldChoices))
          #IF(%DoComments)
            #FOR(%FieldChoices)
              #SET(%TheComment,'   Field Choices: ' & %FieldChoices)
              #CALL(%OutputComment,%TheComment)
            #ENDFOR
          #ENDIF
        #ENDIF
        #IF(ITEMS(%FieldValues))
          #IF(%DoComments)
            #FOR(%FieldValues)
              #SET(%TheComment,'   Field Values:  ' & %FieldValues)
              #CALL(%OutputComment,%TheComment)
            #ENDFOR
          #ENDIF
        #ENDIF
      #OF  ('INFILE')
      #ENDCASE
    #ENDIF
  #ENDFOR
  #IF(%DoComments)
    #CALL(%CommentEnd)
  #ENDIF
  #SET(%NFileName,UPPER(%NFileName))
CREATE TABLE "%NFileName" (
#INSERT(%InterbaseField)                                        #! Process fields
)
;
#!--------------------!
#! Dump the keys here !
#!--------------------!
  #SET(%PrimaryCount,0)                                         #! Primary key exists
  #SET(%SecondaryCount,0)                                       #! Secondary key exists
  #IF(ITEMS(%Key))
    #FOR(%Key)
      #IF(NOT ITEMS(%KeyField))                                 #! Key has fields? No!
        #CYCLE                                                  #! Then go to the next
      #ENDIF                                                    #! key to be processed
#!
      #SET(%nLoc1,INSTRING('RASQL(',%KeyUserOptions,1,1))
      #SET(%nLoc2,INSTRING(')',%KeyUserOptions,1,%nLoc1))
      #SET(%nKeyUser,UPPER(SUB(%KeyUserOptions,%nLoc1,%nLoc2)))
      #!SET(%NKeyUser,UPPER(EXTRACT(%KeyUserOptions,'RASQL')))
      #SET(%NKeyOpt1,EXTRACT(%NKeyUser,'RASQL',1))
      #SET(%NKeyOpt2,EXTRACT(%NKeyUser,'RASQL',2))
      #SET(%NKeyOpt3,EXTRACT(%NKeyUser,'RASQL',3))
      #SET(%NKeyOpt4,EXTRACT(%NKeyUser,'RASQL',4))
#!%NKeyUser, %NKeyOpt1, %NKeyOpt2, %NKeyOpt3, %NKeyOpt4
      #!------------------------------------------------------------!
      #! The first option RASQL(NO) controls if a key is processed. !
      #!------------------------------------------------------------!
      #IF(SUB(%NKeyOpt1,1,1)='N')
        #CYCLE
      #ENDIF
#!
      #SET(%NKeyName,%KeyID)
      #SET(%NKeyName,%FilePrefix & '_' & %KeyID)                #! RAS.2001.10.24
      #SET(%SqlWordItem, UPPER(%NKeyName))                      #! Set up search of
      #FIND(%SqlWordList, %SqlWordItem)                         #! SQL reserved words
      #IF(%SqlWordList)                                         #! Found? Yes! We add
        #SET(%NKeyName, %NKeyName & '_')                        #! trailing underscore
      #ENDIF                                                    #! to get it through
      #SET(%NKeyName,UPPER(%NKeyName))
#!
      #SET(%NKeyFields,'')
      #SET(%NKeyFieldCount,0)
      #FOR(%KeyField)
        #SET(%NKeyField, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
        #IF(%DoPrefixAppend)                                    #! JMG - 2002.07.30
          #SET(%NKeyField,%FilePrefix & '_' & %NKeyField)       #! RAS.2001.10.24
        #ENDIF                                                  #! JMG - 2002.07.30
        #SET(%SqlWordItem, UPPER(%NKeyField))                   #! Set up search of
#!-- SqlWordItem = '%SqlWordItem'
        #FIND(%SqlWordList, %SqlWordItem)                       #! SQL reserved words
#!-- SqlWordList = '%SqlWordList'
        #IF(%SqlWordList)                                       #! Found? Yes! We add
          #SET(%NKeyField, %NKeyField & '_')                    #! trailing underscore
        #ENDIF                                                  #! to get it through
        #SET(%NKeyField,'"' & UPPER(%NKeyField) & '"')
        #SET(%NKeyFieldCount,%NKeyFieldCount + 1 )
        #IF(%NKeyFieldCount = 1)
          #SET(%NKeyFields,%NKeyField)
        #ELSE
          #SET(%NKeyFields, %NKeyFields & ', ' & %NKeyField)
        #ENDIF
      #ENDFOR
      #IF(%KeyPrimary)
        #!----------------------------------------------------------!
        #! This option being OFF allows you to create PRIMARY KEY's !
        #! that are AUTO_INCREMENTED at the field level.            !
        #!----------------------------------------------------------!
        #IF(%CreatePrimary)
          #SET(%PrimaryCount, 1)
          #SET(%PKeyCount, %PKeyCount + 1)
          #SET(%KeyCount, %KeyCount + 1)

          #!--- #IF(%NFNameAuto='')
            #IF(%DoComments)
              #CALL(%CommentBegin)
              #SET(%TheComment,'Key: ' & %KeyID & '(' & %FilePrefix & ') - ' & %KeyDescription)
              #CALL(%OutputComment,%TheComment)
              #SET(%TheComment,'')
              #CALL(%OutputComment,%TheComment)
              #FOR(%KeyField)
                #SET(%DocVar, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
                #SET(%TheComment,%DocVar & ALL(' ', 34 - LEN(%DocVar)) & ' ' & %KeyFieldSequence)
                #CALL(%OutputComment,%TheComment)
              #ENDFOR
              #CALL(%CommentEnd)
            #ENDIF
#! ALTER TABLE %NFileName ADD
#!   CONSTRAINT %NKeyName
#!   PRIMARY KEY (%NKeyFields)
#! ;
CREATE UNIQUE INDEX "%NKeyName_ASC" ON "%NFileName"
  (%NKeyFields)
;
CREATE UNIQUE DESCENDING INDEX "%NKeyName_DESC" ON "%NFileName"
  (%NKeyFields)
;

#IF(%DoGeneratorCreate)                                                 #! JMG.2002.07.30

  #!--------------------------------------------------------------------!
  #! RAS.2004.02.23 - If the prefix is appended it is already added     !
  #! to the %NFNameAuto. If not appended added anyways for uniqueness.  !
  #!--------------------------------------------------------------------!
  #IF(%DoPrefixAppend)                                                  #! RAS.2004.02.23
CREATE GENERATOR "%NFNameAuto" ;
  #ELSE                                                                 #! RAS.2004.02.23
CREATE GENERATOR "%NFilePrefix_%NFNameAuto" ;
  #ENDIF                                                                #! RAS.2004.02.23

COMMIT WORK ;
SET AUTODDL ON ;
SET TERM ^ ;
  #!--------------------------------------------------------------------!
  #! RAS.2004.02.23 - If the prefix is appended it is already added     !
  #! to the %NFNameAuto. If not appended added anyways for uniqueness.  !
  #!--------------------------------------------------------------------!
  #IF(%DoPrefixAppend)                                                  #! RAS.2004.02.23
CREATE TRIGGER "GET_NEXT_%NFNameAuto" FOR "%NFileName"
  #ELSE                                                                 #! RAS.2004.02.23
CREATE TRIGGER "GET_NEXT_%NFilePrefix_%NFNameAuto" FOR "%NFileName"
  #ENDIF                                                                #! RAS.2004.02.23
ACTIVE BEFORE INSERT POSITION 0
AS
BEGIN
  #!--------------------------------------------------------------------!
  #! RAS.2004.02.23 - If the prefix is appended it is already added     !
  #! to the %NFNameAuto. If not appended added anyways for uniqueness.  !
  #!--------------------------------------------------------------------!
  #IF(%DoPrefixAppend)                                                  #! RAS.2004.02.23
  NEW.%NFNameAuto = GEN_ID(%NFNameAuto, 1);
  #ELSE                                                                 #! RAS.2004.02.23
  NEW.%NFNameAuto = GEN_ID(%NFilePrefix_%NFNameAuto, 1);
  #ENDIF                                                                #! RAS.2004.02.23
END
^
COMMIT WORK ^
SET AUTODDL OFF ^
SET TERM ; ^

#ENDIF                                                                  #! JMG - 2002.07.30

          #!--- #ENDIF
        #ENDIF
      #ELSIF(NOT %KeyPrimary)
        #SET(%KeyOthers, %KeyOthers + 1)
        #SET(%KeyCount, %KeyCount + 1)
        #IF(%KeyDuplicate)
          #IF(%DoComments)
            #CALL(%CommentBegin)
            #SET(%TheComment,'Key: ' & %KeyID & '(' & %FilePrefix & ') - ' & %KeyDescription)
            #CALL(%OutputComment,%TheComment)
            #SET(%TheComment,'')
            #CALL(%OutputComment,%TheComment)
            #FOR(%KeyField)
              #SET(%DocVar, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
              #SET(%TheComment,%DocVar & ALL(' ', 34 - LEN(%DocVar)) & ' ' & %KeyFieldSequence)
              #CALL(%OutputComment,%TheComment)
            #ENDFOR
            #CALL(%CommentEnd)
          #ENDIF
          #CASE(%KeyIndex)
          #OF  ('KEY')
#! ALTER TABLE %NFileName ADD
#!   KEY %NKeyName
#!   (%NKeyFields)
#! ;
CREATE INDEX "%NKeyName_ASC" ON "%NFileName"
  (%NKeyFields)
;
CREATE DESCENDING INDEX "%NKeyName_DESC" ON "%NFileName"
  (%NKeyFields)
;
          #OF  ('INDEX')
          #OROF('DYNAMIC')
#! ALTER TABLE %NFileName ADD
#!   INDEX %NKeyName
#!   (%NKeyFields)
#! ;
CREATE INDEX "%NKeyName_ASC" ON "%NFileName"
  (%NKeyFields)
;
CREATE DESCENDING INDEX "%NKeyName_DESC" ON "%NFileName"
  (%NKeyFields)
;
          #ENDCASE
        #ELSE
          #IF(%DoComments)
            #CALL(%CommentBegin)
            #SET(%TheComment,'Key: ' & %KeyID & '(' & %FilePrefix & ') - ' & %KeyDescription)
            #CALL(%OutputComment,%TheComment)
            #SET(%TheComment,'')
            #CALL(%OutputComment,%TheComment)
            #FOR(%KeyField)
              #SET(%DocVar, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
              #SET(%TheComment,%DocVar & ALL(' ', 34 - LEN(%DocVar)) & ' ' & %KeyFieldSequence)
              #CALL(%OutputComment,%TheComment)
            #ENDFOR
            #CALL(%CommentEnd)
          #ENDIF
          #CASE(%KeyIndex)
          #OF  ('KEY')
#! ALTER TABLE %NFileName ADD
#!   UNIQUE %NKeyName
#!   (%NKeyFields)
#! ;
CREATE UNIQUE INDEX "%NKeyName_ASC" ON "%NFileName"
  (%NKeyFields)
;
CREATE UNIQUE DESCENDING INDEX "%NKeyName_DESC" ON "%NFileName"
  (%NKeyFields)
;
          #OF  ('INDEX')
          #OROF('DYNAMIC')
#! ALTER TABLE %NFileName ADD
#!   UNIQUE INDEX %NKeyName
#!   (%NKeyFields)
#! ;
CREATE INDEX "%NKeyName_ASC" ON "%NFileName"
  (%NKeyFields)
;
CREATE DESCENDING INDEX "%NKeyName_DESC" ON "%NFileName"
  (%NKeyFields)
;
          #ENDCASE
        #ENDIF
      #ENDIF
    #ENDFOR
    #IF(%CreatePrimary)
      #IF(NOT %PrimaryCount)

        #CALL(%CommentBegin)
        #SET(%TheComment,'WARNING: ' & %File & '(' & %FilePrefix & ') has no PRIMARY KEY defined.')
        #CALL(%OutputComment,%TheComment)
        #CALL(%CommentEnd)
      #ENDIF
    #ENDIF

  #ELSE

    #CALL(%CommentBegin)
    #SET(%TheComment,'WARNING: ' & %File & '(' & %FilePrefix & ') has no KEYS defined.')
    #CALL(%OutputComment,%TheComment)
    #CALL(%CommentEnd)
  #ENDIF
#ENDFOR

#!-------------------------!
#! Dump the relations here !
#!-------------------------!
#IF(%CreateRelation)
#!

  #CALL(%CommentBegin)
  #SET(%TheComment,'FOREIGN KEYS (RELATIONSHIPS)')
  #CALL(%OutputComment,%TheComment)
  #CALL(%CommentEnd)

  #SET(%RelCount, 0)                                            #! Relation Count to zero
  #FOR(%File)
    #CASE(%FileDriver)
      #OF('ASCII')
    #OROF('BASIC')
    #OROF('DOS')
        #CYCLE
    #ENDCASE
#!
    #CASE(%FileType)
    #OF  ('VIEW')
#!------------------------------------------------------------!
#! RAS.2001.07.22 - Need to deal with aliases for the purpose !
#! of discovering additional key relationships that can not   !
#! be done with a single file from Clarion. In specific       !
#!                                                            !
#! Tables                                                     !
#!  Party_Table         Party_Relationship_Table              !
#!  Party_Id            Party_Id_From                         !
#!                      Party_Id_To                           !
#! Relations                                                  !
#!  Party_Id    <->>    Party_Id_From                         !
#!  Party_Id    <->>    Party_Id_To                           !
#!                                                            !
#! Clarion would need an alias of Party_Relationship_Table to !
#! deal with the second relationship. There would be no way   !
#! to use the second table again since Clarion restricts that !
#! specific operation.                                        !
#!                                                            !
#! SQL handles these type of relationships correctly and they !
#! need to be generated as an original file relationship.     !
#!------------------------------------------------------------!
#!  #OROF('ALIAS')
        #CYCLE
    #ENDCASE
#!
    #IF(%AllTables = 0)
      #FIND(%InclTable,%File)
      #IF(%InclTable = '')
        #CYCLE
      #ENDIF
    #ENDIF
#!
    #SET(%NFileName,%File)                                      #! This is the name
    #IF(%DoPrefixAppend)                                        #! JMG - 2002.07.30
      #SET(%NFileName,%FilePrefix & '_' & %File)                #! RAS.2001.10.24
    #ENDIF                                                      #! JMG - 2002.07.30
    #SET(%SqlWordItem, UPPER(%NFileName))                       #! Set up search of
    #FIND(%SqlWordList, %SqlWordItem)                           #! SQL reserved words
    #IF(%SqlWordList)                                           #! Found? Yes! We add
      #SET(%NFileName, %NFileName & '_')                        #! trailing underscore
    #ENDIF                                                      #! to get it through
    #SET(%NFileName, UPPER(%NFileName))
#!
    #IF(ITEMS(%Relation))
      #FOR(%Relation)
        #SET(%nLoc1,INSTRING('RASQL(',%RelationUserOptions,1,1))
        #SET(%nLoc2,INSTRING(')',%RelationUserOptions,1,%nLoc1))
        #SET(%nRelationUser,UPPER(SUB(%RelationUserOptions,%nLoc1,%nLoc2)))
        #!SET(%NRelationUser,UPPER(EXTRACT(%RelationUserOptions,'RASQL')))
        #SET(%NRelationOpt1,EXTRACT(%NRelationUser,'RASQL',1))
        #SET(%NRelationOpt2,EXTRACT(%NRelationUser,'RASQL',2))
        #SET(%NRelationOpt3,EXTRACT(%NRelationUser,'RASQL',3))
        #SET(%NRelationOpt4,EXTRACT(%NRelationUser,'RASQL',4))
#!%NRelationUser, %NRelationOpt1, %NRelationOpt2, %NRelationOpt3, %NRelationOpt4
        #!-----------------------------------------------------------------!
        #! The first option RASQL(NO) controls if a relation is processed. !
        #!-----------------------------------------------------------------!
        #IF(SUB(%NRelationOpt1,1,1)='N')
          #CYCLE
        #ENDIF
#!
        #IF(%FileRelationType = 'MANY:1')
          #SET(%Relationfield1, '')
          #SET(%Relationfield2, '')
          #SET(%NKeyField, SUB(%FileKey, INSTRING(':',%FileKey,1,1) + 1 , 50))
          #IF(NOT %NKeyField)
            #SET(%NKeyField, SUB(%RelationKey, INSTRING(':',%RelationKey,1,1) + 1 , 50))
          #ENDIF
          #IF(%DoPrefixAppend)                                  #! JMG - 2002.07.30
            #SET(%NKeyField,%FilePrefix & '_' & %NKeyField)     #! RAS.2001.10.24
          #ENDIF                                                #! JMG - 2002.07.30
          #SET(%SqlWordItem, UPPER(%NKeyField))                 #! Set up search of
          #FIND(%SqlWordList, %SqlWordItem)                     #! SQL reserved words
          #IF(%SqlWordList)                                     #! Found? Yes! We add
            #SET(%NKeyField, %NKeyField & '_')                  #! trailing underscore
          #ENDIF                                                #! to get it through
          #SET(%NKeyField, UPPER(%NKeyField))
          #!
          #SET(%NRelateFile, %Relation)
          #IF(%DoPrefixAppend)                                      #! JMG - 2002.07.30
            #SET(%NRelateFile,%RelationPrefix & '_' & %Relation)    #! RAS.2001.10.24
          #ENDIF                                                    #! JMG - 2002.07.30
          #SET(%SqlWordItem, UPPER(%NRelateFile))                   #! Set up search of
          #FIND(%SqlWordList, %SqlWordItem)                         #! SQL reserved words
          #IF(%SqlWordList)                                         #! Found? Yes! We add
            #SET(%NRelateFile, %NRelateFile & '_')                  #! trailing underscore
          #ENDIF                                                    #! to get it through
          #SET(%NRelateFile, UPPER(%NRelateFile))
          #!
          #SET(%RelationField1Count, ITEMS(%FileKeyField))
          #SET(%RelationField2Count, ITEMS(%RelationKeyField))
          #!
          #SET(%NRelateCount, %RelationField1Count)
          #SET(%NRelateComma, %NRelateCount - 1)
          #SET(%NRelateItem, 0)
          #FOR(%FileKeyField)
            #IF(%NRelateItem > %NRelateCount)
              #BREAK
            #ENDIF
            #SET(%NRelateItem, %NRelateItem + 1)
            #SET(%NRelateField1, SUB(%FileKeyField,INSTRING(':',%FileKeyField,1,1)+1,50))
            #IF(%DoPrefixAppend)                                            #! JMG - 2002.07.30
              #SET(%NRelateField1,%FilePrefix & '_' & %NRelateField1)       #! RAS.2001.10.24
            #ENDIF                                                          #! JMG - 2002.07.30
            #SET(%NRelateField2, SUB(%FileKeyFieldLink,INSTRING(':',%FileKeyFieldLink,1,1)+1,50))
            #IF(%DoPrefixAppend)                                            #! JMG - 2002.07.30
              #SET(%NRelateField2,%RelationPrefix & '_' & %NRelateField2)   #! RAS.2001.10.24
            #ENDIF                                                          #! JMG - 2002.07.30
            #!
            #SET(%SqlWordItem, UPPER(%NRelateField1))           #! Set up search of
            #FIND(%SqlWordList, %SqlWordItem)                   #! SQL reserved words
            #IF(%SqlWordList)                                   #! Found? Yes! We add
              #SET(%NRelateField1, %NRelateField1 & '_')        #! trailing underscore
            #ENDIF                                              #! to get it through
            #SET(%NRelateField1, UPPER(%NRelateField1))
            #!
            #SET(%SqlWordItem, UPPER(%NRelateField2))           #! Set up search of
            #FIND(%SqlWordList, %SqlWordItem)                   #! SQL reserved words
            #IF(%SqlWordList)                                   #! Found? Yes! We add
              #SET(%NRelateField2, %NRelateField2 & '_')        #! trailing underscore
            #ENDIF                                              #! to get it through
            #SET(%NRelateField2, UPPER(%NRelateField2))
            #!
            #SET(%RelationField1, %RelationField1 & '"' & %NRelateField1 & '"')
            #SET(%RelationField2, %RelationField2 & '"' & %NRelateField2 & '"')
            #IF(%NRelateComma)
              #SET(%NRelateComma, %NRelateComma - 1)
              #SET(%RelationField1, %RelationField1 & ', ')
              #SET(%RelationField2, %RelationField2 & ', ')
            #ENDIF
          #ENDFOR
          #!-------------------------------------------!
          #! RAS.2001.01.20 - Added this feature.      !
          #! Has syntax errors, so commented out.      !
          #!-------------------------------------------!
          #! Added to the comments so programmer is at !
          #! aware that other relationships may exist. !
          #!-------------------------------------------!
          #SET(%RelationUpdate,%RelationConstraintUpdate)       #! ON UPDATE ?
          #SET(%RelationDelete,%RelationConstraintDelete)       #! ON DELETE ?
          #!-------------------------------------------!
          #IF(%Relationfield1)
            #MESSAGE('Relation generation of: ' & %File,2)
            #SET(%RelCount, %RelCount + 1)
            #IF(%DoComments)
              #CALL(%CommentBegin)
              #SET(%TheComment,'Relation: ' & %File & '(' & %FilePrefix & ')')
              #SET(%TheComment,%TheComment & ' [' & %FileRelationType & ']')
              #SET(%TheComment,%TheComment & ' ' & %Relation & '(' & %RelationPrefix & ')')
              #CALL(%OutputComment,%TheComment)
              #IF(%FileType = 'ALIAS')                            #! RAS.2001.07.22
                #SET(%TheComment,'Alias to: ' & %AliasFile)
                #CALL(%OutputComment,%TheComment)
              #ENDIF                                              #! RAS.2001.07.22
              #SET(%TheComment,'OnUpdate: ' & %RelationUpdate)
              #CALL(%OutputComment,%TheComment)
              #SET(%TheComment,'OnDelete: ' & %RelationDelete)
              #CALL(%OutputComment,%TheComment)
              #SET(%TheComment,'')
              #CALL(%OutputComment,%TheComment)
              #SET(%TheComment,%File & ALL(' ', 34 - LEN(%File)) & ' ' & %FileKey)
              #CALL(%OutputComment,%TheComment)
              #FOR(%FileKeyField)
                #SET(%TheComment,%FileKeyField & ALL(' ', 34 - LEN(%FileKeyField)) & ' <=> ' & %FileKeyFieldLink)
                #CALL(%OutputComment,%TheComment)
              #ENDFOR
              #SET(%TheComment,'')
              #CALL(%OutputComment,%TheComment)
              #SET(%TheComment,%Relation & ALL(' ', 34 - LEN(%Relation)) & ' ' & %RelationKey)
              #CALL(%OutputComment,%TheComment)
              #FOR(%RelationKeyField)
                #SET(%TheComment,%RelationKeyField & ALL(' ', 34 - LEN(%RelationKeyField)) & ' <=> ' & %RelationKeyFieldLink)
                #CALL(%OutputComment,%TheComment)
              #ENDFOR
              #CALL(%CommentEnd)
            #ENDIF
            #!----------------------------------------------------------!
            #! RAS.2001.07.22 - The alias name gets changed to the real !
            #! name to generate the SQL statement for the relationship. !
            #!----------------------------------------------------------!
            #IF(%FileType = 'ALIAS')
              #FIX(%File,%AliasFile)
              #IF(%DoPrefixAppend)                              #! JMG - 2002.07.30
                #SET(%NFileName,%FilePrefix & '_' & %File)
              #ENDIF                                            #! JMG - 2002.07.30
              #SET(%NFileName,UPPER(%NFileName))
            #ENDIF
ALTER TABLE "%NFileName" ADD
  #!--------------------------------------------------------------------!
  #! RAS.2004.03.05 - If the prefix is appended it is already added     !
  #! to the %NFNameAuto. If not appended added anyways for uniqueness.  !
  #! JMG - 2002.07.30 Fix - give each constraint a unique name          !
  #!--------------------------------------------------------------------!
  #IF(%DoPrefixAppend)                                                  #! RAS.2004.03.05
   CONSTRAINT "REL_%NKeyField"
  #ELSE                                                                 #! RAS.2004.03.05
   CONSTRAINT "REL_%FilePrefix_%NKeyField"
  #ENDIF                                                                #! RAS.2004.03.05
   FOREIGN KEY (%Relationfield1)
   REFERENCES "%NRelateFile" (%Relationfield2)
            #IF(%RelationUpdate)
#!   ON UPDATE %RelationUpdate
            #ENDIF
            #IF(%RelationDelete)
#!   ON DELETE %RelationDelete
            #ENDIF
;

          #ENDIF
        #ENDIF
      #ENDFOR
    #ENDIF
  #ENDFOR

#ENDIF
#!
#SET(%FieldUnique,ITEMS(%FieldTable))
#IF((%PKeyOption>0)AND(%PKeyCount>0))
  #CALL(%CommentBegin)
  #SET(%TheComment,'ERROR: Redo this script and turn create primary indexes off.')
  #CALL(%OutputComment,%TheComment)
  #CALL(%CommentEnd)

#ENDIF
#!
COMMIT WORK ;

#INSERT(%CommentTrailerBlock)
#!---------------------------------------------------------------------
#CLOSE(%OutputFile)
#RUN('NOTEPAD.EXE "' & %OutputFile & '"')
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%InterbaseField)
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#! Dump the fields here for a Interbase database back end.            !
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#SET(%InnerGroup, 0)
#SET(%FieldComma, ITEMS(%Field) - 1)
#!
#FOR(%Field)
#! FieldComma='%FieldComma'
  #SET(%nLoc1,INSTRING('RASQL(',%FieldUserOptions,1,1))
  #SET(%nLoc2,INSTRING(')',%FieldUserOptions,1,%nLoc1))
  #SET(%nFieldUser,UPPER(SUB(%FieldUserOptions,%nLoc1,%nLoc2)))
  #!SET(%NFieldUser,UPPER(EXTRACT(%FieldUserOptions,'RASQL')))
  #SET(%NFieldOpt1,EXTRACT(%NFieldUser,'RASQL',1))
  #SET(%NFieldOpt2,EXTRACT(%NFieldUser,'RASQL',2))
  #SET(%NFieldOpt3,EXTRACT(%NFieldUser,'RASQL',3))
  #SET(%NFieldOpt4,EXTRACT(%NFieldUser,'RASQL',4))
#!%NFieldUser, %NFieldOpt1, %NFieldOpt2, %NFieldOpt3, %NFieldOpt4
  #!--------------------------------------------------------------!
  #! The first option RASQL(NO) controls if a field is processed. !
  #!--------------------------------------------------------------!
  #! WARNING: The last field can NOT be an ommited field.         !
  #!--------------------------------------------------------------!
  #! And if the last field happens to be and 'END', you will need !
  #! to add a RASQL(END) to the last field before the 'END'. This !
  #! will suppress the last comma. Reality sometimes happens.     !
  #!--------------------------------------------------------------!
  #IF(SUB(%NFieldOpt1,1,1)='N')
    #SET(%FieldComma, %FieldComma - 1)
    #CYCLE
  #ENDIF
#!
  #SET(%NFieldType, '')                                         #! Field type
  #SET(%NFieldName, '')                                         #! Field name
  #SET(%NFieldTSql, '')                                         #! Field SQL type
  #SET(%NFieldDef,  '')                                         #! Field default
  #SET(%NFieldValue,'')                                         #! Field check values
  #SET(%NFieldAuto, '')                                         #! Field AUTO_INCREMENT
  #SET(%NFieldNN,   '')                                         #! Field NOT NULL
  #SET(%NFieldSize, 0)                                          #! Field decimal size
  #SET(%NFieldDec,  0)                                          #! Field decimal places
  #!------------------------------------------------!
  #! Begin removal of types that are not processed. !
  #!------------------------------------------------!
  #IF(%FieldType='GROUP')
    #SET(%InnerGroup, %InnerGroup + 1)
    #IF(INSTRING('OVER(',%FieldStatement,1,1))
      #!SET(%FieldCount, %FieldCount + 1)                       #! RAS.2001.01.15
      #!SET(%FieldComma, %FieldComma - 1)                       #! RAS.2001.01.12
    #ENDIF
    #SET(%FieldComma, %FieldComma - 1)                          #! RAS.2001.01.12
    #CYCLE
  #ENDIF
  #!
  #IF(%FieldType='END')
    #SET(%InnerGroup, %InnerGroup - 1)
    #SET(%FieldComma, %FieldComma - 1)
    #CYCLE
  #ENDIF
#!
  #SET(%FD1L,%FieldDimension1)                                  #! Name 1 made shorter
  #SET(%FD2L,%FieldDimension2)                                  #! Name 2 made shorter
  #SET(%FD3L,%FieldDimension3)                                  #! Name 3 made shorter
  #SET(%FD4L,%FieldDimension4)                                  #! Name 4 made shorter
#!
  #IF(%FD1L>0)                                                  #! IF we got array field,
    #IF(NOT %NoArrayOver)                                       #! AND we got groups,
      #SET(%FieldComma, %FieldComma - 1)                        #! THEN ignore the array
      #CYCLE                                                    #! field since the fields
    #ENDIF                                                      #! in the group are going
  #ENDIF                                                        #! to define the array.
  #!------------------------------------------------!
  #! Ended removal of types that are not processed. !
  #!------------------------------------------------!
#!
  #SET(%NFieldName, %FieldID)                                   #! Field Name
  #IF(%DoPrefixAppend)                                          #! JMG - 2002.07.30
    #SET(%NFieldName, %FilePrefix & '_' & %FieldID)             #! RAS.2001.10.24
  #ENDIF                            #! JMG - 2002.07.30
  #SET(%SqlWordItem, UPPER(%NFieldName))                        #! Set up search of
  #FIND(%SqlWordList, %SqlWordItem)                             #! SQL reserved words
  #IF(%SqlWordList)                                             #! Found? Yes! We add
    #SET(%NFieldName, %NFieldName & '_')                        #! trailing underscore
  #ENDIF                                                        #! to get it through
  #SET(%NFieldName, UPPER(%NFieldName))
#!
  #SET(%FieldCount, %FieldCount + 1)                            #! Add to field count
#!
  #!----------------------------------------------------------------!
  #! The second option RASQL(,<FieldType>) overrides the field type !
  #! in the dictionary. This allows conversion of data types that   !
  #! have no existance in the dictionary but exist in the SQL.      !
  #!----------------------------------------------------------------!
  #SET(%NFieldType, %FieldType)
  #IF(%NFieldOpt2)
    #SET(%NFieldType, %NFieldOpt2)
  #ENDIF
#!
  #!----------------------------------------------------!
  #! Calculate decimal size and places for some fields. !
  #! Only DECIMAL fields have characters and decimals.  !
  #! Everything else that needs it, is figured out from !
  #! the display mask used.                             !
  #!----------------------------------------------------!
  #! RAS.2001.01.12 - Added additional MySQL types.     !
  #!----------------------------------------------------!
  #SET(%NFieldSize, %FieldMemoSize)                             #! Field decimal size
  #SET(%NFieldDec, %FieldPlaces)                                #! Field decimal places
  #CASE(%NFieldType)
    #OF('SREAL')
  #OROF('BFLOAT4')
  #OROF('REAL')
  #OROF('BFLOAT8')
    #SET(%nLoc1,INSTRING('-',%FieldDisplayPicture,1,1))
    #IF(NOT %nLoc1)
      #SET(%nLoc1,INSTRING('N',UPPER(%FieldDisplayPicture),1,1))
    #ENDIF
    #SET(%nLoc2,INSTRING('.',%FieldDisplayPicture,1,1))
    #SET(%NFieldSize,SUB(%FieldDisplayPicture,(%nLoc1+1),(%nLoc2-1)))
    #SET(%NFieldDec,SUB(%FieldDisplayPicture,(%nLoc2+1),LEN(%FieldDisplayPicture)))
#!%FieldDisplayPicture, %nLoc1, %nLoc2, %NFieldSize, %NFieldDec
  #ENDCASE
  #!-------------------------------------------------!
  #! Deal with the initial values in the dictionary. !
  #!-------------------------------------------------!
  #! Additional logic will have to be added to deal  !
  #! with intialization string format parameters.    !
  #! *** More than I want to deal with right now *** !
  #!-------------------------------------------------!
  #SET(%NFieldDef, %FieldInitial)
  #IF(%NFieldDef)
    #CASE(%NFieldType)
    #OF  ('MEMO')
    #OROF('STRING')
    #OROF('CSTRING')
    #OROF('PSTRING')
      #IF(SUB(%NFieldDef,1,1)='''')
      #ELSE
        #SET(%NFieldDef, '''' & %NFieldDef  & '''')
      #ENDIF
    #ENDCASE
  #ELSE
    #CASE(%NFieldType)
    #OF  ('MEMO')
    #OROF('STRING')
    #OROF('CSTRING')
    #OROF('PSTRING')
      #SET(%NFieldDef, '''''')
    #ENDCASE
  #ENDIF
  #IF(%NFieldDef)
    #SET(%NFieldDef, 'DEFAULT ' & %NFieldDef & '')
  #ENDIF
  #!------------------------------------------------------!
  #! Deal with the dictionary field type conversion here. !
  #!------------------------------------------------------!
  #CASE(%NFieldType)
  #OF  ('BLOB')
      #SET(%NFieldTSql, 'BLOB')
      #SET(%NFieldTSql, %NFieldTSql & ' SUB_TYPE 0 SEGMENT SIZE 80')
    #IF(%CharSet)
      #SET(%NFieldTSql, %NFieldTSql & ' CHARACTER SET ' & %CharSet)
    #ENDIF
      #SET(%NFieldDef,  '')
  #OF  ('MEMO')
      #SET(%NFieldTSql, 'BLOB')
      #SET(%NFieldTSql, %NFieldTSql & ' SUB_TYPE TEXT SEGMENT SIZE 80')
    #IF(%CharSet)
      #SET(%NFieldTSql, %NFieldTSql & ' CHARACTER SET ' & %CharSet)
    #ENDIF
      #SET(%NFieldDef,  '')
  #OF  ('STRING')
      #IF(%UseCharforSmallStr AND (%FieldMemoSize <= %UseCharSize))     #! JMG - 2002.07.30
        #SET(%NFieldTSql, 'CHAR(' & %FieldMemoSize & ')' )              #! JMG - 2002.07.30
      #ELSE                                                             #! JMG - 2002.07.30
        #!SET(%NFieldTSql, 'VARCHAR(' & %FieldMemoSize & ')' )          #! RAS.2004.08.24
        #SET(%NFieldTSql, 'CHAR(' & %FieldMemoSize & ')' )              #! RAS.2004.08.24
      #ENDIF                                                            #! JMG - 2002.07.30
    #IF(%CharSet)
      #SET(%NFieldTSql, %NFieldTSql & ' CHARACTER SET ' & %CharSet)
    #ENDIF
      #SET(%NFieldDef,  '')
  #OF  ('CSTRING')
  #OROF('PSTRING')
      #IF(%ReduceCStringsbyOne AND (%FieldMemoSize > 1))                #! JMG - 2002.07.30
        #SET(%CStringLen, %FieldMemoSize - 1)
      #ELSE                                                             #! JMG - 2002.07.30
        #SET(%CStringLen, %FieldMemoSize)                               #! JMG - 2002.07.30
      #ENDIF                                                            #! JMG - 2002.07.30
      #IF(%UseCharforSmallStr AND (%FieldMemoSize <= %UseCharSize))     #! JMG - 2002.07.30
        #SET(%NFieldTSql, 'CHAR(' & %CStringLen & ')' )                 #! JMG - 2002.07.30
      #ELSE                                                             #! JMG - 2002.07.30
        #SET(%NFieldTSql, 'VARCHAR(' & %CStringLen & ')' )
      #ENDIF                                                            #! JMG - 2002.07.30
    #IF(%CharSet)
      #SET(%NFieldTSql, %NFieldTSql & ' CHARACTER SET ' & %CharSet)
    #ENDIF
      #SET(%NFieldDef,  '')
  #OF  ('LONG')
      #SET(%NFieldTSql, 'INTEGER')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@D',UPPER(%FieldRecordPicture),1,1))
      #SET(%NFieldTSql, 'DATE')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@D',UPPER(%FieldDisplayPicture),1,1))
      #SET(%NFieldTSql, 'DATE')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@T',UPPER(%FieldRecordPicture),1,1))
      #SET(%NFieldTSql, 'TIME')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@T',UPPER(%FieldDisplayPicture),1,1))
      #SET(%NFieldTSql, 'TIME')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('SHORT')
      #SET(%NFieldTSql, 'SMALLINT')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('BYTE')
#!      #SET(%NFieldTSql, 'CHAR(1)')                                    #! RAS.2004.07.24
#!    #IF(%CharSet)                                                     #! RAS.2004.07.24
#!      #SET(%NFieldTSql, %NFieldTSql & ' CHARACTER SET ' & %CharSet)   #! RAS.2004.07.24
#!    #ENDIF                                                            #! RAS.2004.07.24
      #SET(%NFieldTSql, 'SMALLINT')                                     #! RAS.2004.07.24
      #SET(%NFieldDef,  '')
  #OF  ('ULONG')
      #SET(%NFieldTSql, 'INTEGER')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('USHORT')
      #SET(%NFieldTSql, 'SMALLINT')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('DECIMAL')
  #OROF('PDECIMAL')
      #SET(%NFieldTSql, 'DECIMAL(' & %NFieldSize & ',' & %NFieldDec & ')')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('SREAL')
  #OROF('BFLOAT4')
      #SET(%NFieldTSql, 'FLOAT')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('REAL')
  #OROF('BFLOAT8')
      #SET(%NFieldTSql, 'DOUBLE PRECISION')
    #IF(%FieldInitial = 0)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('DATE')
  #OROF('TIME')
      #SET(%NFieldTSql, %NFieldType)
      #SET(%NFieldDef,  '')
#!
#!
      #!----------------------------------------------------!
      #! Begin Interbase unique field type handling.        !
      #!----------------------------------------------------!
      #! The following are very specific to the SQL backend !
      #! They do not exist in the dictionary in any form.   !
      #!----------------------------------------------------!
      #! These are parameter 2 type entries.                !
      #!----------------------------------------------------!
      #! RAS.2001.10.21 - No unique fields handled
      #!----------------------------------------------------!
      #! Ended Interbase unique field type handling.        !
      #!----------------------------------------------------!
#!
#!
  #ELSE
      #!---------------------------------------------!
      #! This is a field type not currently handled. !
      #! Time to do some more template programming.  !
      #!---------------------------------------------!
      #SET(%NFieldTSql,'***' & %NFieldType & '***')
  #ENDCASE
  #!----------------------------------------------------------!
  #! Deal with field validation parameters in the dictionary. !
  #!----------------------------------------------------------!
  #! If you are validating something, that means it's going   !
  #! to have some value. Mark it as NOT NULL.                 !
  #!----------------------------------------------------------!
  #IF(%FieldValidation)
    #SET(%NFieldNN,     'NOT NULL')
#!
#!    #FOR(%FieldScreenControl)
#!%FieldID: FSC(%FieldValidation): %FieldScreenControl
#!    #ENDFOR
#!
    #CASE(%FieldValidation)
    #OF  ('NONZERO')
    #OF  ('INRANGE')
    #OF  ('BOOLEAN')
      #FOR(%FieldScreenControl)
        #SET(%ChoiceLine,EXTRACT(%FieldScreenControl,'VALUE',0))
      #ENDFOR
      #IF(NOT %ChoiceLine)                                      #! RAS.2001.01.18
        #SET(%ChoiceLine,'''Y'',''N''')                         #! RAS.2001.01.18
      #ENDIF                                                    #! RAS.2001.01.18
      #IF(NOT %ChoiceLine)
        #SET(%ChoiceLine,'*** NO BOOLEAN VALUES ***')
      #ENDIF
      #IF(%ForceBoolYN)                                         #! RAS.2001.01.18
        #SET(%ChoiceLine,'''Y'',''N''')                         #! RAS.2001.01.18
      #ENDIF                                                    #! RAS.2001.01.18
      #SET(%NFieldValue,'CHECK("' & %NFieldName & '" IN(' & %ChoiceLine & '))')       #! RAS.2004.02.23
      #IF(NOT %FieldInitial)
        #SET(%NFieldDef,'')
      #ELSIF(%FieldInitial > 0)
        #SET(%NFieldDef,'')
      #ENDIF
    #OF  ('INLIST')
      #SET(%ChoiceLine, '')
      #IF(ITEMS(%FieldChoices))
        #SET(%ChoiceComma,ITEMS(%FieldChoices) - 1)
        #FOR(%FieldChoices)
          #SET(%ChoiceLine,%ChoiceLine & '''' & %FieldChoices & '''')
          #IF(%ChoiceComma > 0)
            #SET(%ChoiceLine,%ChoiceLine & ',')
            #SET(%ChoiceComma,%ChoiceComma - 1)
          #ENDIF
        #ENDFOR
      #ENDIF
      #!----------------------------------------------------------------!
      #! RAS.2003.02.23 - Replace values for choices when they exist.   !
      #!----------------------------------------------------------------!
      #IF(ITEMS(%FieldValues))
        #SET(%ChoiceLine, '')
        #SET(%ChoiceComma,ITEMS(%FieldValues) - 1)
        #FOR(%FieldValues)
          #SET(%ChoiceLine,%ChoiceLine & '''' & %FieldValues & '''')
          #IF(%ChoiceComma > 0)
            #SET(%ChoiceLine,%ChoiceLine & ',')
            #SET(%ChoiceComma,%ChoiceComma - 1)
          #ENDIF
        #ENDFOR
      #ENDIF
      #!----------------------------------------------------------------!
      #!----------------------------------------------------------------!
      #IF(NOT %ChoiceLine)                                      #! RAS.2001.01.18
        #SET(%ChoiceLine,'''?''')                               #! RAS.2001.01.18
      #ENDIF                                                    #! RAS.2001.01.18
      #IF(NOT %ChoiceLine)
        #SET(%ChoiceLine,'*** NO INLIST VALUES ***')
      #ENDIF
      #SET(%NFieldValue,'CHECK("' & %NFieldName & '" IN(' & %ChoiceLine & '))')       #! RAS.2004.02.23
      #IF(NOT %FieldInitial)
        #SET(%NFieldDef,'')
      #ELSIF(%FieldInitial > 0)
        #SET(%NFieldDef,'')
      #ENDIF
      #IF(%ForceListNoDef)                                      #! RAS.2001.01.18
        #SET(%NFieldDef,'')                                     #! RAS.2001.01.18
      #ENDIF                                                    #! RAS.2001.01.18
    #OF  ('INFILE')
    #ENDCASE
  #ENDIF
  #!--------------------------------------------------------------!
  #! RAS.2004.01.29 - If we are using the CONSTRAINT key logic,   !
  #! we do not label the field as a PRIMARY KEY.                  !
  #!--------------------------------------------------------------!
  #! RAS.2001.09.09 - Default detected auto-increment attribute.  !
  #!--------------------------------------------------------------!
  #IF(%NFieldName = %NFNameAuto)
    #IF(NOT %ConstraintAutoIncrement)                           #! RAS.2004.01.29
      #SET(%NFieldAuto,   'PRIMARY KEY')                        #! RAS.2004.01.29
    #ENDIF                                                      #! RAS.2004.01.29
    #SET(%NFieldNN,     'NOT NULL')
  #ENDIF
#!
  #ADD(%FieldTable,   %FieldID)
#!
  #SET(%IFieldInKey,%Field)                                     #! Field Name
  #FIND(%LFieldInKey,%IFieldInKey)                              #! Field In Key list lookup
  #IF(%LFieldInKey)                                             #! Found? Yes, part of key.
    #SET(%NFieldNN,     'NOT NULL')                             #! Primary keys fields can
  #ENDIF                                                        #! not be NULL. Make it so!
#!
  #!----------------------------------------------------------------------------!
  #!----------------------------------------------------------------------------!
  #! This is the actual SQL field data line creation.                           !
  #!----------------------------------------------------------------------------!
  #!----------------------------------------------------------------------------!
#!
  #IF(%FD1L>0)                                                  #! We GOT array field
  #!----------------------------------------------------------------------------!
  #! If we got an array field at this point, we do not have arrays over groups. !
  #! We have simple array fields and must add additional fields to the table.   !
  #!----------------------------------------------------------------------------!
    #SET(%FldArray,'')                                          #! Clear created name
    #SET(%FD1S,'')                                              #! Number dimension 1
    #SET(%FD2S,'')                                              #! Number dimension 2
    #SET(%FD3S,'')                                              #! Number dimension 3
    #SET(%FD4S,'')                                              #! Number dimension 4
    #!
    #SET(%DimCount,1)                                           #! Got dimension 1
    #IF(%FD2L>0)                                                #! Dimension 2?
      #SET(%DimCount,%DimCount+1)                               #! Got dimension 2
      #IF(%FD3L>0)                                              #! Dimension 3?
        #SET(%DimCount,%DimCount+1)                             #! Got dimension 3
        #IF(%FD4L>0)                                            #! Dimension 4?
          #SET(%DimCount,%DimCount+1)                           #! Got dimension 4
        #ENDIF                                                  #! Dimension 4?
      #ENDIF                                                    #! Dimension 3?
    #ENDIF                                                      #! Dimension 2?
    #!
    #CASE(%DimCount)                                            #! Logic on dimension
    #OF(1)                                                      #! A 1 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #SET(%FldArray,'"' & %NFieldName & %FD1S & '"')
        #SET(%NFieldLine,   '')
        #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
        #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
        #IF(%NFieldDef)                                         #! RAS.2004.03.03
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)     #! RAS.2004.03.03
        #ENDIF                                                  #! RAS.2004.03.03
        #IF(%NFieldNN)
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
        #ENDIF
        #IF(%NFieldValue)                                       #! RAS.2004.02.23
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldValue)   #! RAS.2004.02.23
        #ENDIF                                                  #! RAS.2004.02.23
        #IF(%NFieldAuto)
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
        #ENDIF
        #IF(%FD1I=%FD1L)                                        #! Last field?
#!-- %FldArray
          #IF(%FieldComma > 0)
            #SET(%FieldComma, %FieldComma - 1)
            #IF(SUB(%NFieldOpt1,1,1)='E')                       #! RASQL(END)
              #IF(NOT %ConstraintAutoIncrement)                 #! RAS.2004.01.29
  %NFieldLine
              #ELSE                                             #! RAS.2004.01.29
  %NFieldLine ,
              #ENDIF                                            #! RAS.2004.01.29
            #ELSE
  %NFieldLine ,
            #ENDIF
          #ELSE
            #IF(NOT %ConstraintAutoIncrement)                   #! RAS.2004.01.29
  %NFieldLine
            #ELSE                                               #! RAS.2004.01.29
  %NFieldLine ,
            #ENDIF                                              #! RAS.2004.01.29
          #ENDIF
        #ELSE                                                   #! Not last field
  %NFieldLine ,
        #ENDIF                                                  #! Just dump stuff
      #ENDLOOP
    #OF(2)                                                      #! A 2 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #LOOP,FOR(%FD2I,1,%FD2L)
          #SET(%FD2S,'_' & %FD2I)
          #SET(%FldArray,'"' & %NFieldName & %FD1S & %FD2S & '"')
          #SET(%NFieldLine,   '')
          #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
          #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
          #IF(%NFieldDef)                                         #! RAS.2004.03.03
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)     #! RAS.2004.03.03
          #ENDIF                                                  #! RAS.2004.03.03
          #IF(%NFieldNN)
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
          #ENDIF
          #IF(%NFieldValue)                                           #! RAS.2004.02.23
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldValue)       #! RAS.2004.02.23
          #ENDIF                                                      #! RAS.2004.02.23
          #IF(%NFieldAuto)
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
          #ENDIF
          #IF((%FD1I=%FD1L)AND(%FD2I=%FD2L))                    #! Last field?
#!-- %FldArray
            #IF(%FieldComma > 0)
              #SET(%FieldComma, %FieldComma - 1)
              #IF(SUB(%NFieldOpt1,1,1)='E')                     #! RASQL(END)
                #IF(NOT %ConstraintAutoIncrement)               #! RAS.2004.01.29
  %NFieldLine
                #ELSE                                           #! RAS.2004.01.29
  %NFieldLine ,
                #ENDIF                                          #! RAS.2004.01.29
              #ELSE
  %NFieldLine ,
              #ENDIF
            #ELSE
              #IF(NOT %ConstraintAutoIncrement)                 #! RAS.2004.01.29
  %NFieldLine
              #ELSE                                             #! RAS.2004.01.29
  %NFieldLine ,
              #ENDIF                                            #! RAS.2004.01.29
            #ENDIF
          #ELSE                                                 #! Not last field
  %NFieldLine ,
          #ENDIF                                                #! Just dump stuff
        #ENDLOOP
      #ENDLOOP
    #OF(3)                                                      #! A 3 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #LOOP,FOR(%FD2I,1,%FD2L)
          #SET(%FD2S,'_' & %FD2I)
          #LOOP,FOR(%FD3I,1,%FD3L)
            #SET(%FD3S,'_' & %FD3I)
            #SET(%FldArray,'"' & %NFieldName & %FD1S & %FD2S & %FD3S & '"')
            #SET(%NFieldLine,   '')
            #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
            #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
            #IF(%NFieldDef)                                         #! RAS.2004.03.03
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)     #! RAS.2004.03.03
            #ENDIF                                                  #! RAS.2004.03.03
            #IF(%NFieldNN)
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
            #ENDIF
            #IF(%NFieldValue)                                           #! RAS.2004.02.23
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldValue)       #! RAS.2004.02.23
            #ENDIF                                                      #! RAS.2004.02.23
            #IF(%NFieldAuto)
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
            #ENDIF
            #IF((%FD1I=%FD1L)AND(%FD2I=%FD2L)AND(%FD3I=%FD3L))  #! Last field?
#!-- %FldArray
              #IF(%FieldComma > 0)
                #SET(%FieldComma, %FieldComma - 1)
                #IF(SUB(%NFieldOpt1,1,1)='E')                   #! RASQL(END)
                  #IF(NOT %ConstraintAutoIncrement)             #! RAS.2004.01.29
  %NFieldLine
                  #ELSE                                         #! RAS.2004.01.29
  %NFieldLine ,
                  #ENDIF                                        #! RAS.2004.01.29
                #ELSE
  %NFieldLine ,
                #ENDIF
              #ELSE
                #IF(NOT %ConstraintAutoIncrement)               #! RAS.2004.01.29
  %NFieldLine
                #ELSE                                           #! RAS.2004.01.29
  %NFieldLine ,
                #ENDIF                                          #! RAS.2004.01.29
              #ENDIF
            #ELSE                                               #! Not last field
  %NFieldLine ,
            #ENDIF                                              #! Just dump stuff
          #ENDLOOP
        #ENDLOOP
      #ENDLOOP
    #OF(4)                                                      #! A 4 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #LOOP,FOR(%FD2I,1,%FD2L)
          #SET(%FD2S,'_' & %FD2I)
          #LOOP,FOR(%FD3I,1,%FD3L)
            #SET(%FD3S,'_' & %FD3I)
            #LOOP,FOR(%FD4I,1,%FD4L)
              #SET(%FD4S,'_' & %FD4I)
              #SET(%FldArray,'"' & %NFieldName & %FD1S & %FD2S & %FD3S & %FD4S & '"')
              #SET(%NFieldLine,   '')
              #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
              #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
              #IF(%NFieldDef)                                         #! RAS.2004.03.03
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)     #! RAS.2004.03.03
              #ENDIF                                                  #! RAS.2004.03.03
              #IF(%NFieldNN)
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
              #ENDIF
              #IF(%NFieldValue)                                           #! RAS.2004.02.23
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldValue)       #! RAS.2004.02.23
              #ENDIF                                                      #! RAS.2004.02.23
              #IF(%NFieldAuto)
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
              #ENDIF
              #IF((%FD1I=%FD1L)AND(%FD2I=%FD2L)AND(%FD3I=%FD3L)AND(%FD4I=%FD4L)) #! Last field?
#!-- %FldArray
                #IF(%FieldComma > 0)
                  #SET(%FieldComma, %FieldComma - 1)
                  #IF(SUB(%NFieldOpt1,1,1)='E')                 #! RASQL(END)
                    #IF(NOT %ConstraintAutoIncrement)           #! RAS.2004.01.29
  %NFieldLine
                    #ELSE                                       #! RAS.2004.01.29
  %NFieldLine ,
                    #ENDIF                                      #! RAS.2004.01.29
                  #ELSE
  %NFieldLine ,
                  #ENDIF
                #ELSE
                  #IF(NOT %ConstraintAutoIncrement)             #! RAS.2004.01.29
  %NFieldLine
                  #ELSE                                         #! RAS.2004.01.29
  %NFieldLine ,
                  #ENDIF                                        #! RAS.2004.01.29
                #ENDIF
              #ELSE                                             #! Not last field
  %NFieldLine ,
              #ENDIF                                            #! Just dump stuff
            #ENDLOOP
          #ENDLOOP
        #ENDLOOP
      #ENDLOOP
    #ENDCASE
#!
  #ELSE                                                         #! We GOT normal field
  #!----------------------------------------------------------------------------!
  #! This processes the normal fields that are NOT an array.                    !
  #!----------------------------------------------------------------------------!
    #SET(%NFieldLine,   '')
    #SET(%NFieldLine,   %NFieldLine & '"' & %NFieldName & '"')  #! Field Name
    #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)        #! SQL Type
    #IF(%NFieldDef)                                             #! RAS.2004.03.03
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)         #! RAS.2004.03.03
    #ENDIF                                                      #! RAS.2004.03.03
    #IF(%NFieldNN)
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)          #! NOT NULL
    #ENDIF
    #IF(%NFieldValue)                                           #! RAS.2004.02.23
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldValue)       #! RAS.2004.02.23
    #ENDIF                                                      #! RAS.2004.02.23
    #IF(%NFieldAuto)
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)        #! AUTO_INCREMENT
    #ENDIF
    #!
    #IF(%FieldComma > 0)
      #SET(%FieldComma, %FieldComma - 1)
      #IF(SUB(%NFieldOpt1,1,1)='E')                             #! RASQL(END)
        #IF(NOT %ConstraintAutoIncrement)                       #! RAS.2004.01.29
  %NFieldLine
        #ELSE                                                   #! RAS.2004.01.29
  %NFieldLine ,
        #ENDIF                                                  #! RAS.2004.01.29
      #ELSE
  %NFieldLine ,
      #ENDIF
    #ELSE
      #IF(NOT %ConstraintAutoIncrement)                         #! RAS.2004.01.29
  %NFieldLine
      #ELSE                                                     #! RAS.2004.01.29
  %NFieldLine ,
      #ENDIF                                                    #! RAS.2004.01.29
    #ENDIF
  #ENDIF
#!
  #!----------------------------------------------------------------------------!
  #!----------------------------------------------------------------------------!
#!
#ENDFOR
#!--------------------------------------------------------!
#! RAS.2004.01.29 - Using CONSTRAINT for the primary key. !
#!--------------------------------------------------------!
#IF(%ConstraintAutoIncrement)                                           #! RAS.2004.01.29
  CONSTRAINT "PK_%NFileName" PRIMARY KEY("%NFNameAuto")
#ENDIF                                                                  #! RAS.2004.01.29
#!---------------------------------------------------------------------
#GROUP(%InterbaseFieldEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%OutputComment,* %CommentText),AUTO
#!---------------------------------------------------------------------
#IF(%CommentText = '-')
  #SET(%CommentText,'/' & ALL('*',76) & '/')
#ELSIF(%CommentText = '')
  #SET(%CommentText,'/*' & ALL(' ',74) & '*/')
#ELSE
  #SET(%CommentText,'/* ' & %CommentText & ALL(' ', 72 - LEN(%CommentText)) & ' */')
#ENDIF
%CommentText
#!---------------------------------------------------------------------
#GROUP(%OutputCommentEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%CommentHeaderBlock)
#!---------------------------------------------------------------------
#SET(%TheComment,'-')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment, 'BOF: ' & %OutputFile)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'SQL script creator for Interbase database')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Created: ' & %TheDate & ' - ' & %TheTime)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'-')
#CALL(%OutputComment,%TheComment)
#!---------------------------------------------------------------------
#GROUP(%CommentHeaderBlockEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%CommentTrailerBlock)
#!---------------------------------------------------------------------
#SET(%TheComment,'-')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Tables              :' & ALL(' ', 7 - LEN(%TableCount)) & %TableCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Key: Auto-Increment :' & ALL(' ', 7 - LEN(%AutoCount)) & %AutoCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Opt: Primary Keys   :' & ALL(' ', 7 - LEN(%PKeyOption)) & %PKeyOption & '  (Counted from field options)')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Key: Primary Keys   :' & ALL(' ', 7 - LEN(%PKeyCount)) & %PKeyCount & '  (Counted when primary key is created)')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Key: Other Keys     :' & ALL(' ', 7 - LEN(%KeyOthers)) & %KeyOthers & '  (Counted when other keys are created)')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'All Keys Counted    :' & ALL(' ', 7 - LEN(%KeyCount)) & %KeyCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Relationships       :' & ALL(' ', 7 - LEN(%RelCount)) & %RelCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Fields              :' & ALL(' ', 7 - LEN(%FieldCount)) & %FieldCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Unique Fields       :' & ALL(' ', 7 - LEN(%FieldUnique)) & %FieldUnique)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'SQL Reserved        :' & ALL(' ', 7 - LEN(%SqlWordCount)) & %SqlWordCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'Clarion Reserved    :' & ALL(' ', 7 - LEN(%ClarionWordCount)) & %ClarionWordCount)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'EOF: ' & %OutputFile)
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'-')
#CALL(%OutputComment,%TheComment)
#!---------------------------------------------------------------------
#GROUP(%CommentTrailerBlockEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%CommentBegin),AUTO
#!---------------------------------------------------------------------
#SET(%TheComment,'-')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#!---------------------------------------------------------------------
#GROUP(%CommentBeginEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%CommentEnd),AUTO
#!---------------------------------------------------------------------
#SET(%TheComment,'')
#CALL(%OutputComment,%TheComment)
#SET(%TheComment,'-')
#CALL(%OutputComment,%TheComment)
#!---------------------------------------------------------------------
#GROUP(%CommentEndEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%Dct2InterbaseEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------