embark.texi

\input texinfo    @c -*- texinfo -*-
@c %**start of header
@setfilename embark.info
@settitle Embark: Emacs Mini-Buffer Actions Rooted in Keymaps
@documentencoding UTF-8
@documentlanguage en
@c %**end of header

@dircategory Emacs misc features
@direntry
* Embark: (embark).     Emacs Mini-Buffer Actions Rooted in Keymaps.
@end direntry

@finalout
@titlepage
@title Embark: Emacs Mini-Buffer Actions Rooted in Keymaps
@author Omar Antolín Camarena
@end titlepage

@contents

@ifnottex
@node Top
@top Embark: Emacs Mini-Buffer Actions Rooted in Keymaps
@end ifnottex

@menu
* Overview::
* Quick start::
* Advanced configuration::
* How does Embark call the actions?::
* Embark, Marginalia and Consult: Embark Marginalia and Consult. 
* Resources::
* Contributions::
* Acknowledgments::

@detailmenu
--- The Detailed Node Listing ---

Overview

* Acting on targets::
* The default action on a target::
* Working with sets of possible targets::
* Switching to a different command without losing what you've typed::

Working with sets of possible targets

* @samp{embark-live} a live-updating variant of @samp{embark-collect}::

Advanced configuration

* Showing information about available targets and actions::
* Selecting commands via completions instead of key bindings::
* Quitting the minibuffer after an action::
* Running some setup after injecting the target::
* Running hooks before or after an action::
* Creating your own keymaps::
* Defining actions for new categories of targets::

Defining actions for new categories of targets

* New minibuffer target example - tab-bar tabs::
* New target example in regular buffers - short Wikipedia links::

How does Embark call the actions?

* Non-interactive functions as actions::

Embark, Marginalia and Consult

* Marginalia::
* Consult::

@end detailmenu
@end menu

@node Overview
@chapter Overview

Embark makes it easy to choose a command to run based on what is near
point, both during a minibuffer completion session (in a way familiar
to Helm or Counsel users) and in normal buffers. Bind the command
@samp{embark-act} to a key and it acts like prefix-key for a keymap of
@emph{actions} (commands) relevant to the @emph{target} around point. With point on
an URL in a buffer you can open the URL in a browser or eww or
download the file it points to. If while switching buffers you spot an
old one, you can kill it right there and continue to select another.
Embark comes preconfigured with over a hundred actions for common
types of targets such as files, buffers, identifiers, s-expressions,
sentences; and it is easy to add more actions and more target types.
Embark can also collect all the candidates in a minibuffer to an
occur-like buffer or export them to a buffer in a major-mode specific
to the type of candidates, such as dired for a set of files, ibuffer
for a set of buffers, or customize for a set of variables.

@menu
* Acting on targets::
* The default action on a target::
* Working with sets of possible targets::
* Switching to a different command without losing what you've typed::
@end menu

@node Acting on targets
@section Acting on targets

You can think of @samp{embark-act} as a keyboard-based version of a
right-click contextual menu. The @samp{embark-act} command (which you should
bind to a convenient key), acts as a prefix for a keymap offering you
relevant @emph{actions} to use on a @emph{target} determined by the context:

@itemize
@item
In the minibuffer, the target is the current top completion
candidate.
@item
In the @samp{*Completions*} buffer the target is the completion at point.
@item
In a regular buffer, the target is the region if active, or else the
file, symbol, URL, s-expression or defun at point.
@end itemize

Multiple targets can be present at the same location and you can cycle
between them by repeating the @samp{embark-act} key binding. The type of
actions offered depend on the type of the target. Here is a sample of
a few of the actions offered in the default configuration:

@itemize
@item
For files you get offered actions like deleting, copying,
renaming, visiting in another window, running a shell command on the
file, etc.
@item
For buffers the actions include switching to or killing the buffer.
@item
For package names the actions include installing, removing or
visiting the homepage.
@item
For Emacs Lisp symbols the actions include finding the definition,
looking up documentation, evaluating (which for a variable
immediately shows the value, but for a function lets you pass it
some arguments first). There are some actions specific to variables,
such as setting the value directly or though the customize system,
and some actions specific to commands, such as binding it to a key.
@end itemize

By default when you use @samp{embark-act} if you don't immediately select an
action, after a short delay Embark will pop up a buffer showing a list
of actions and their corresponding key bindings. If you are using
@samp{embark-act} outside the minibuffer, Embark will also highlight the
current target. These behaviors are configurable via the variable
@samp{embark-indicators}. Instead of selecting an action via its key binding,
you can select it by name with completion by typing @samp{C-h} after
@samp{embark-act}.

Everything is easily configurable: determining the current target,
classifying it, and deciding which actions are offered for each type
in the classification. The above introduction just mentions part of
the default configuration.

Configuring which actions are offered for a type is particularly easy
and requires no programming: the variable @samp{embark-keymap-alist}
associates target types with variables containing keymaps, and those
keymaps containing bindings for the actions. (To examine the available
categories and their associated keymaps, you can use @samp{C-h v
embark-keymap-alist} or customize that variable.) For example, in the
default configuration the type @samp{file} is associated with the symbol
@samp{embark-file-map}. That symbol names a keymap with single-letter key
bindings for common Emacs file commands, for instance @samp{c} is bound to
@samp{copy-file}. This means that if you are in the minibuffer after running
a command that prompts for a file, such as @samp{find-file} or @samp{rename-file},
you can copy a file by running @samp{embark-act} and then pressing @samp{c}.

These action keymaps are very convenient but not strictly necessary
when using @samp{embark-act}: you can use any command that reads from the
minibuffer as an action and the target of the action will be inserted
at the first minibuffer prompt. After running @samp{embark-act} all of your
key bindings and even @samp{execute-extended-command} can be used to run a
command. For example, if you want to replace all occurrences of the
symbol at point, just use @samp{M-%} as the action, there is no need to bind
@samp{query-replace} in one of Embark's keymaps. Also, those action keymaps
are normal Emacs keymaps and you should feel free to bind in them
whatever commands you find useful as actions and want to be available
through convenient bindings.

The actions in @samp{embark-general-map} are available no matter what type
of completion you are in the middle of. By default this includes
bindings to save the current candidate in the kill ring and to insert
the current candidate in the previously selected buffer (the buffer
that was current when you executed a command that opened up the
minibuffer).

Emacs's minibuffer completion system includes metadata indicating the
@emph{category} of what is being completed. For example, @samp{find-file}'s
metadata indicates a category of @samp{file} and @samp{switch-to-buffer}'s metadata
indicates a category of @samp{buffer}. Embark has the related notion of the
@emph{type} of a target for actions, and by default when category metadata
is present it is taken to be the type of minibuffer completion
candidates when used as targets. Emacs commands often do not set
useful category metadata so the @uref{https://github.com/minad/marginalia, Marginalia} package, which supplies
this missing metadata, is highly recommended for use with Embark.

Embark's default configuration has actions for the following target
types: files, buffers, symbols, packages, URLs, bookmarks, and as a
somewhat special case, actions for when the region is active. You can
read about the @uref{https://github.com/oantolin/embark/wiki/Default-Actions, default actions and their key bindings} on the GitHub
project wiki.

@node The default action on a target
@section The default action on a target

Embark has a notion of default action for a target:

@itemize
@item
If the target is a minibuffer completion candidate, then the default
action is whatever command opened the minibuffer in the first place.
For example if you run @samp{kill-buffer}, then the default action will be
to kill buffers.
@item
If the target comes from a regular buffer (i.e., not a minibuffer),
then the default action is whatever is bound to @samp{RET} in the keymap of
actions for that type of target. For example, in Embark's default
configuration for a URL found at point the default action is
@samp{browse-url}, because @samp{RET} is bound to @samp{browse-url} in the @samp{embark-url-map}
keymap.
@end itemize

To run the default action you can press @samp{RET} after running @samp{embark-act}.
Note that if there are several different targets at a given location,
each has its own default action, so first cycle to the target you want
and then press @samp{RET} to run the corresponding default action.

There is also @samp{embark-dwim} which runs the default action for the first
target found. It's pretty handy in non-minibuffer buffers: with
Embark's default configuration it will:

@itemize
@item
Open the file at point.
@item
Open the URL at point in a web browser (using the @samp{browse-url}
command).
@item
Compose a new email to the email address at point.
@item
In an Emacs Lisp buffer, if point is on an opening parenthesis or
right after a closing one, it will evaluate the corresponding
expression.
@item
Go to the definition of an Emacs Lisp function, variable or macro at
point.
@item
Find the file corresponding to an Emacs Lisp library at point.
@end itemize

@node Working with sets of possible targets
@section Working with sets of possible targets

Besides acting individually on targets, Embark lets you work
collectively on a set of target @emph{candidates}. For example, while you are
in the minibuffer the candidates are simply the possible completions
of your input. Embark provides three main commands to work on candidate
sets:

@itemize
@item
The @samp{embark-act-all} command runs the same action on each of the
current candidates. It is just like using @samp{embark-act} on each
candidate in turn. (Because you can easily act on many more
candidates than you meant to, by default Embark asks you to confirm
uses of @samp{embark-act-all}; you can turn this off by setting the user
option @samp{embark-confirm-act-all} to @samp{nil}.)

@item
The @samp{embark-collect} command produces a buffer listing all the current
candidates, for you to peruse and run actions on at your leisure.
The candidates are displayed as a list showing additional annotations.

The Embark Collect buffer is ``dired-like'': you can mark and unmark
candidates with @samp{m} and @samp{u}, you can unmark all marked candidates with @samp{U}
or toggle the marks with @samp{t}. In an Embark Collect buffer
@samp{embark-act-all} is bound to @samp{A} and will act on all currently marked
candidates if there any, and will act on all candidates if none are
marked.

@item
The @samp{embark-export} command tries to open a buffer in an appropriate
major mode for the set of candidates. If the candidates are files
export produces a Dired buffer; if they are buffers, you get an
Ibuffer buffer; and if they are packages you get a buffer in
package menu mode.

If you use the grepping commands from the @uref{https://github.com/minad/consult/, Consult} package,
@samp{consult-grep}, @samp{consult-git-grep} or @samp{consult-ripgrep}, then you should
install the @samp{embark-consult} package, which adds support for exporting a
list of grep results to an honest grep-mode buffer, on which you can
even use @uref{https://github.com/mhayashi1120/Emacs-wgrep, wgrep} if you wish.
@end itemize

When in doubt choosing between exporting and collecting, a good rule
of thumb is to always prefer @samp{embark-export} since when an exporter to a
special major mode is available for a given type of target, it will be
more featureful than an Embark collect buffer, and if no such exporter
is configured the @samp{embark-export} command falls back to the generic
@samp{embark-collect}.

These commands are always available as ``actions'' (although they do not
act on just the current target but on all candidates) for @samp{embark-act}
and are bound to @samp{A}, @samp{S} (for ``snapshot''), and @samp{E}, respectively, in
@samp{embark-general-map}. This means that you do not have to bind your own
key bindings for these (although you can, of course!), just a key
binding for @samp{embark-act}.

Reverting an Embark Collect or Embark Export buffer has slightly
unusual behavior if the buffer was obtained by running @samp{embark-collect}
or @samp{embark-export} from within a minibuffer completion session. In that
case reverting just restarts the completion session, that is, the
command that opened the minibuffer is run again and the minibuffer
contents restored. You can then interact normally with the command,
perhaps editing the minibuffer contents, and, if you wish, you can
rerun @samp{embark-collect} or @samp{embark-export} to get an updated buffer.

@menu
* @samp{embark-live} a live-updating variant of @samp{embark-collect}::
@end menu

@node @samp{embark-live} a live-updating variant of @samp{embark-collect}
@subsection @samp{embark-live} a live-updating variant of @samp{embark-collect}

Finally, there is also an @samp{embark-live} variant of the @samp{embark-collect}
command which automatically updates the collection after each change
in the source buffer. Users of a completion UI that automatically
updates and displays the candidate list (such as Vertico, Icomplete,
Selectrum, Fido-mode, or MCT) will probably not want to use
@samp{embark-live} from the minibuffer as they will then have two live
updating displays of the completion candidates!

A more likely use of @samp{embark-live} is to be called from a regular buffer
to display a sort of live updating ``table of contents'' for the buffer.
This depends on having appropriate candidate collectors configured in
@samp{embark-candidate-collectors}. There are not many in Embark's default
configuration, but you can try this experiment: open a dired buffer in
a directory that has very many files, mark a few, and run @samp{embark-live}.
You'll get an Embark Collect buffer containing only the marked files,
which updates as you mark or unmark files in dired. To make
@samp{embark-live} genuinely useful other candidate collectors are required.
The @samp{embark-consult} package (documented near the end of this manual)
contains a few: one for imenu items and one for outline headings as
used by @samp{outline-minor-mode}. Those collectors really do give
@samp{embark-live} a table-of-contents feel.

@node Switching to a different command without losing what you've typed
@section Switching to a different command without losing what you've typed

Embark also has the @samp{embark-become} command which is useful for when
you run a command, start typing at the minibuffer and realize you
meant a different command. The most common case for me is that I run
@samp{switch-to-buffer}, start typing a buffer name and realize I haven't
opened the file I had in mind yet! I'll use this situation as a
running example to illustrate @samp{embark-become}. When this happens I can,
of course, press @samp{C-g} and then run @samp{find-file} and open the file, but
this requires retyping the portion of the file name you already
typed. This process can be streamlined with @samp{embark-become}: while still
in the @samp{switch-to-buffer} you can run @samp{embark-become} and effectively
make the @samp{switch-to-buffer} command become @samp{find-file} for this run.

You can bind @samp{embark-become} to a key in @samp{minibuffer-local-map}, but it is
also available as an action under the letter @samp{B} (uppercase), so you
don't need a binding if you already have one for @samp{embark-act}. So,
assuming I have @samp{embark-act} bound to, say, @samp{C-.}, once I realize I
haven't open the file I can type @samp{C-. B C-x C-f} to have
@samp{switch-to-buffer} become @samp{find-file} without losing what I have already
typed in the minibuffer.

But for even more convenience, @samp{embark-become} offers shorter key
bindings for commands you are likely to want the current command to
become. When you use @samp{embark-become} it looks for the current command in
all keymaps named in the list @samp{embark-become-keymaps} and then activates
all keymaps that contain it. For example, the default value of
@samp{embark-become-keymaps} contains a keymap @samp{embark-become-file+buffer-map}
with bindings for several commands related to files and buffers, in
particular, it binds @samp{switch-to-buffer} to @samp{b} and @samp{find-file} to @samp{f}. So when
I accidentally try to switch to a buffer for a file I haven't opened
yet, @samp{embark-become} finds that the command I ran, @samp{switch-to-buffer}, is
in the keymap @samp{embark-become-file+buffer-map}, so it activates that
keymap (and any others that also contain a binding for
@samp{switch-to-buffer}). The end result is that I can type @samp{C-. B f} to
switch to @samp{find-file}.

@node Quick start
@chapter Quick start

The easiest way to install Embark is from GNU ELPA, just run @samp{M-x
package-install RET embark RET}. (It is also available on MELPA@.) It is
highly recommended to also install @uref{https://github.com/minad/marginalia, Marginalia} (also available on GNU
ELPA), so that Embark can offer you preconfigured actions in more
contexts. For @samp{use-package} users, the following is a very reasonable
starting configuration:

@lisp
(use-package marginalia
  :ensure t
  :config
  (marginalia-mode))

(use-package embark
  :ensure t

  :bind
  (("C-." . embark-act)         ;; pick some comfortable binding
   ("C-;" . embark-dwim)        ;; good alternative: M-.
   ("C-h B" . embark-bindings)) ;; alternative for `describe-bindings'

  :init

  ;; Optionally replace the key help with a completing-read interface
  (setq prefix-help-command #'embark-prefix-help-command)

  :config

  ;; Hide the mode line of the Embark live/completions buffers
  (add-to-list 'display-buffer-alist
               '("\\`\\*Embark Collect \\(Live\\|Completions\\)\\*"
                 nil
                 (window-parameters (mode-line-format . none)))))

;; Consult users will also want the embark-consult package.
(use-package embark-consult
  :ensure t ; only need to install it, embark loads it after consult if found
  :hook
  (embark-collect-mode . consult-preview-at-point-mode))
@end lisp

About the suggested key bindings for @samp{embark-act} and @samp{embark-dwim}:
@itemize
@item
Those key bindings are unlikely to work in the terminal, but
terminal users are probably well aware of this and will know to
select different bindings.
@item
The suggested @samp{C-.} binding is used by default in (at least some
installations of) GNOME to input emojis, and Emacs doesn't even get
a chance to respond to the binding. You can select a different key
binding for @samp{embark-act} or use @samp{ibus-setup} to change the shortcut for
emoji insertion (Emacs 29 will likely use @samp{C-x 8 e e}, in case you
want to set the same one system-wide).
@item
The suggested alternative of @samp{M-.} for @samp{embark-dwim} is bound by default
to @samp{xref-find-definitions}. That is a very useful command but
overwriting it with @samp{embark-dwim} is sensible since in Embark's
default configuration, @samp{embark-dwim} will also find the definition of
the identifier at point. (Note that @samp{xref-find-definitions} with a
prefix argument prompts you for an identifier, @samp{embark-dwim} does not
cover this case).
@end itemize

Other Embark commands such as @samp{embark-act-all}, @samp{embark-become},
@samp{embark-collect}, and @samp{embark-export} can be run through @samp{embark-act} as
actions bound to @samp{A}, @samp{B}, @samp{S} (for ``snapshot''), and @samp{E} respectively, and
thus don't really need a dedicated key binding, but feel free to bind
them directly if you so wish. If you do choose to bind them directly,
you'll probably want to bind them in @samp{minibuffer-local-map}, since they
are most useful in the minibuffer (in fact, @samp{embark-become} only works
in the minibuffer).

The command @samp{embark-dwim} executes the default action at point. Another good
keybinding for @samp{embark-dwim} is @samp{M-.} since @samp{embark-dwim} acts like
@samp{xref-find-definitions} on the symbol at point. @samp{C-.} can be seen as a
right-click context menu at point and @samp{M-.} acts like left-click. The
keybindings are mnemonic, both act at the point (@samp{.}).

Embark needs to know what your minibuffer completion system considers
to be the list of candidates and which one is the current candidate.
Embark works out of the box if you use Emacs's default tab completion,
the built-in @samp{icomplete-mode} or @samp{fido-mode}, or the third-party packages
@uref{https://github.com/minad/vertico, Vertico}, @uref{https://github.com/raxod502/selectrum/, Selectrum} or @uref{https://github.com/abo-abo/swiper, Ivy}.

If you are a @uref{https://emacs-helm.github.io/helm/, Helm} or @uref{https://github.com/abo-abo/swiper, Ivy} user you are unlikely to want Embark since
those packages include comprehensive functionality for acting on
minibuffer completion candidates. (Embark does come with Ivy
integration despite this.)

@node Advanced configuration
@chapter Advanced configuration

@menu
* Showing information about available targets and actions::
* Selecting commands via completions instead of key bindings::
* Quitting the minibuffer after an action::
* Running some setup after injecting the target::
* Running hooks before or after an action::
* Creating your own keymaps::
* Defining actions for new categories of targets::
@end menu

@node Showing information about available targets and actions
@section Showing information about available targets and actions

By default, if you run @samp{embark-act} and do not immediately select an
action, after a short delay Embark will pop up a buffer called @samp{*Embark
Actions*} containing a list of available actions with their key
bindings. You can scroll that buffer with the mouse of with the usual
commands @samp{scroll-other-window} and @samp{scroll-other-window-down} (bound by
default to @samp{C-M-v} and @samp{C-M-S-v}).

That functionality is provided by the @samp{embark-mixed-indicator}, but
Embark has other indicators that can provide information about the
target and its type, what other targets you can cycle to, and which
actions have key bindings in the action map for the current type of
target. Any number of indicators can be active at once and the user
option @samp{embark-indicators} should be set to a list of the desired
indicators.

Embark comes with the following indicators:

@itemize
@item
@samp{embark-minimal-indicator}: shows a messages in the echo area or
minibuffer prompt showing the current target and the types of all
targets starting with the current one; this one is on by default.

@item
@samp{embark-highlight-indicator}: highlights the target at point;
also on by default.

@item
@samp{embark-verbose-indicator}: displays a table of actions and their key
bindings in a buffer; this is not on by default, in favor of the
mixed indicator described next.

@item
@samp{embark-mixed-indicator}: starts out by behaving as the minimal
indicator but after a short delay acts as the verbose indicator;
this is on by default.

@item
@samp{embark-isearch-highlight-indicator}: this only does something when
the current target is the symbol at point, in which case it
lazily highlights all occurrences of that symbol in the current
buffer, like isearch; also on by default.
@end itemize

Users of the popular @uref{https://github.com/justbur/emacs-which-key, which-key} package may prefer to use the
@samp{embark-which-key-indicator} from the @uref{https://github.com/oantolin/embark/wiki/Additional-Configuration#use-which-key-like-a-key-menu-prompt, Embark wiki}. Just copy its
definition from the wiki into your configuration and customize the
@samp{embark-indicators} user option to exclude the mixed and verbose
indicators and to include @samp{embark-which-key-indicator}.

@node Selecting commands via completions instead of key bindings
@section Selecting commands via completions instead of key bindings

As an alternative to reading the list of actions in the verbose or
mixed indicators (see the previous section for a description of
these), you can press the @samp{embark-help-key}, which is @samp{C-h} by default
(but you may prefer @samp{?} to free up @samp{C-h} for use as a prefix) after
running @samp{embark-act}. Pressing the help key will prompt you for the name
of an action with completion (but feel free to enter a command that is
not among the offered candidates!), and will also remind you of the
key bindings. You can press @samp{embark-keymap-prompter-key}, which is @samp{@@} by
default, at the prompt and then one of the key bindings to enter the
name of the corresponding action.

You may think that with the @samp{*Embark Actions*} buffer popping up to
remind you of the key bindings you'd never want to use completion to
select an action by name, but personally I find that typing a small
portion of the action name to narrow down the list of candidates feels
significantly faster than visually scanning the entire list of actions.

If you find you prefer entering actions that way, you can configure
embark to always prompt you for actions by setting the variable
@samp{embark-prompter} to @samp{embark-completing-read-prompter}.

@node Quitting the minibuffer after an action
@section Quitting the minibuffer after an action

By default, if you call @samp{embark-act} from the minibuffer it quits the
minibuffer after performing the action. You can change this by setting
the user option @samp{embark-quit-after-action} to @samp{nil}. Having @samp{embark-act} @emph{not}
quit the minibuffer can be useful to turn commands into little ``thing
managers''. For example, you can use @samp{find-file} as a little file manager
or @samp{describe-package} as a little package manager: you can run those
commands, perform a series of actions, and then quit the command.

If you want to control the quitting behavior in a fine-grained manner
depending on the action, you can set @samp{embark-quit-after-action} to an
alist, associating commands to either @samp{t} for quitting or @samp{nil} for not
quitting. When using an alist, you can use the special key @samp{t} to
specify the default behavior. For example, to specify that by default
actions should not quit the minibuffer but that using @samp{kill-buffer} as
an action should quit, you can use the following configuration:

@lisp
(setq embark-quit-after-action '((kill-buffer . t) (t . nil)))
@end lisp

The variable @samp{embark-quit-after-action} only specifies a default, that
is, it only controls whether or not @samp{embark-act} quits the minibuffer
when you call it without a prefix argument, and you can select the
opposite behavior to what the variable says by calling @samp{embark-act} with
@samp{C-u}. Also note that both the variable @samp{embark-quit-after-action} and @samp{C-u}
have no effect when you call @samp{embark-act} outside the minibuffer.

If you find yourself using the quitting and non-quitting variants of
@samp{embark-act} about equally often, independently of the action, you may
prefer to simply have separate commands for them instead of a single
command that you call with @samp{C-u} half the time. You could, for example,
keep the default exiting behavior of @samp{embark-act} and define a
non-quitting version as follows:

@lisp
(defun embark-act-noquit ()
  "Run action but don't quit the minibuffer afterwards."
  (interactive)
  (let ((embark-quit-after-action nil))
    (embark-act)))
@end lisp

@node Running some setup after injecting the target
@section Running some setup after injecting the target

You can customize what happens after the target is inserted at the
minibuffer prompt of an action. There are
@samp{embark-target-injection-hooks}, that are run by default after injecting
the target into the minibuffer. The variable
@samp{embark-target-injection-hooks} is an alist associating commands to
their setup hooks. There are two special keys: if no setup hook is
specified for a given action, the hook associated to @samp{t} is run; and the
hook associated to @samp{:always} is run regardless of the action. (This
variable used to have the less explicit name of
@samp{embark-setup-action-hooks}, so please update your configuration.)

For example, consider using @samp{shell-command} as an action during file
completion. It would be useful to insert a space before the target
file name and to leave the point at the beginning, so you can
immediately type the shell command to run on that file. That's why in
Embark's default configuration there is an entry in
@samp{embark-target-injection-hooks} associating @samp{shell-command} to a hook that
includes @samp{embark--shell-prep}, a simple helper function that quotes all
the spaces in the file name, inserts an extra space at the beginning
of the line and leaves point to the left of it.

Now, the preparation that @samp{embark--shell-prep} does would be useless if
Embark did what it normally does after it inserts the target of the
action at the minibuffer prompt, which is to ``press @samp{RET}'' for you,
accepting the target as is; if Embark did that for @samp{shell-command} you
wouldn't get a chance to type in the command to execute! That is why
in Embark's default configuration the entry for @samp{shell-command} in
@samp{embark-target-injection-hooks} also contains the function
@samp{embark--allow-edit}.

Embark used to have a dedicated variable @samp{embark-allow-edit-actions} to
which you could add commands for which Embark should forgo pressing
@samp{RET} for you after inserting the target. Since its effect can also be
achieved via the general @samp{embark-target-injection-hooks} mechanism, that
variable has been removed to simply Embark. Be sure to update your
configuration; if you had something like:

@lisp
(add-to-list 'embark-allow-edit-actions 'my-command)
@end lisp

you should replace it with:

@lisp
(push 'embark--allow-edit
      (alist-get 'my-command embark-target-injection-hooks))
@end lisp


Also note that while you could abuse @samp{embark--allow-edit} so that you
have to confirm ``dangerous'' actions such as @samp{delete-file}, it is better
to implement confirmation by adding the @samp{embark--confirm} function to
the appropriate entry of a different hook alist, namely,
@samp{embark-pre-action-hooks}.

Besides @samp{embark--allow-edit}, Embark comes with another function that is
of general utility in action setup hooks: @samp{embark--ignore-target}. Use
it for commands that do prompt you in the minibuffer but for which
inserting the target would be inappropriate. This is not a common
situation but does occasionally arise. For example it is used by
default for @samp{shell-command-on-region}: that command is used as an action
for region targets, and it prompts you for a shell command; you
typically do @emph{not} want the target, that is the contents of the region,
to be entered at that prompt!

@node Running hooks before or after an action
@section Running hooks before or after an action

Embark has two variables, @samp{embark-pre-action-hooks} and
@samp{embark-post-action-hooks}, which are alists associating commands to
hooks that should run before or after the command is used as an
action. As with, @samp{embark-target-injection-hooks}, there are two special keys
for the alists: @samp{t} designates the default hook to run when no specific
hook is specified for a command; and the hook associated to @samp{:always}
runs regardless.

The default values of those variables are fairly extensive, adding
creature comforts to make running actions a smooth experience. Embark
comes with several functions intended to be added to these hooks, and
used in the default values of @samp{embark-pre-action-hooks} and
@samp{embark-post-action-hooks}.

For pre-action hooks:

@table @asis
@item @samp{embark--confirm}
Prompt the user for confirmation before executing
the action. This is used be default for commands deemed ``dangerous'',
or, more accurately, hard to undo, such as @samp{delete-file} and
@samp{kill-buffer}.

@item @samp{embark--mark-target}
Mark the target as an active region. Most
targets at point outside the minibuffer report which region of the
buffer they correspond to (this is the information used by
@samp{embark-highlight-indicator} to know what portion of the buffer to
highlight); this function marks that region. It is useful as a pre
action hook for commands that expect a region to be marked, for
example, it is used by default for @samp{indent-region} so that it works on
s-expression targets, or for @samp{fill-region} so that it works on
paragraph targets.

@item @samp{embark--unmark-target}
Unmark the active region. Use this for
commands you want to act on the region contents but without the
region being active. The default configuration uses this function as
a pre-action hook for @samp{occur} and @samp{query-replace}, for example, so that
you can use them as actions with region targets to search the whole
buffer for the text contained in the region. Without this pre-action
hook using @samp{occur} as an action for a region target would be
pointless: it would search for the the region contents @emph{in the
region}, (typically, due to the details of regexps) finding only one
match!

@item @samp{embark--beginning-of-target}
Move to the beginning of the target
(for targets that report bounds). This is used by default for
backward motion commands such as @samp{backward-sexp}, so that they don't
accidentally leave you on the current target.

@item @samp{embark--end-of-target}
Move to the end of the target. This is used
similarly to the previous function, but also for commands that act
on the last s-expression like @samp{eval-last-sexp}. This allow you to act
on an s-expression from anywhere inside it and still use
@samp{eval-last-sexp} as an action.

@item @samp{embark--narrow-to-target}
Narrow buffer to current target. Use
this as a pre-action hook to localize the effect of actions that
don't already work on just the region. In the default configuration
it is used for @samp{repunctuate-sentences}.

@item @samp{embark--xref-push-markers}
Push the current location on the xref
marker stack. Use this for commands that take you somewhere and for
which you'd like to be able to come back to where you were using
@samp{xref-pop-marker-stack}. This is used by default for @samp{find-library}.

@item @samp{embark--cd}
Run the action with @samp{default-directory} set to the
directory associated to the current target. The target should be of
type @samp{file}, @samp{buffer}, @samp{bookmark} or @samp{library}, and the associated directory
is what you'd expect in each case.
@end table

For post-action hooks:

@table @asis
@item @samp{embark--restart}
Restart the command currently prompting in the
minibuffer, so that the list of completion candidates is updated.
This is useful as a post action hook for commands that delete or
rename a completion candidate; for example the default value of
@samp{embark-post-action-hooks} uses it for @samp{delete-file}, @samp{kill-buffer},
@samp{rename-file}, @samp{rename-buffer}, etc.
@end table

@node Creating your own keymaps
@section Creating your own keymaps

All internal keymaps are defined with a helper macro
@samp{embark-define-keymap} that you can use to define your own keymaps,
whether they are for new categories in @samp{embark-keymap-alist} or for any
other purpose! For example a simple version of the file action keymap
could be defined as follows:

@lisp
(embark-define-keymap embark-file-map
  "Example keymap with a few file actions"
  ("d" delete-file)
  ("r" rename-file)
  ("c" copy-file))
@end lisp

Remember also that these action keymaps are perfectly normal Emacs
keymaps, and do not need to be created with this helper macro. You
can use the built-in @samp{define-key}, or your favorite external package
such as @samp{bind-key} or @samp{general.el} to manage them.

@node Defining actions for new categories of targets
@section Defining actions for new categories of targets

It is easy to configure Embark to provide actions for new types of
targets, either in the minibuffer or outside it. I present below two
very detailed examples of how to do this. At several points I'll
explain more than one way to proceed, typically with the easiest
option first. I include the alternative options since there will be
similar situations where the easiest option is not available.

@menu
* New minibuffer target example - tab-bar tabs::
* New target example in regular buffers - short Wikipedia links::
@end menu

@node New minibuffer target example - tab-bar tabs
@subsection New minibuffer target example - tab-bar tabs

As an example, take the new @uref{https://www.gnu.org/software/emacs/manual/html_node/emacs/Tab-Bars.html, tab bars} from Emacs 27. I'll explain how
to configure Embark to offer tab-specific actions when you use the
tab-bar-mode commands that mention tabs by name. The configuration
explained here is now built-in to Embark (and Marginalia), but it's
still a good self-contained example. In order to setup up tab actions
you would need to: (1) make sure Embark knows those commands deal with
tabs, (2) define a keymap for tab actions and configure Embark so it
knows that's the keymap you want.

@enumerate
@item
@anchor{Telling Embark about commands that prompt for tabs by name}Telling Embark about commands that prompt for tabs by name


For step (1), it would be great if the @samp{tab-bar-mode} commands reported
the completion category @samp{tab} when asking you for a tab with
completion. (All built-in Emacs commands that prompt for file names,
for example, do have metadata indicating that they want a @samp{file}.) They
do not, unfortunately, and I will describe a couple of ways to deal
with this.

Maybe the easiest thing is to configure @uref{https://github.com/minad/marginalia, Marginalia} to enhance those
commands. All of the @samp{tab-bar-*-tab-by-name} commands have the words
``tab by name'' in the minibuffer prompt, so you can use:

@lisp
(add-to-list 'marginalia-prompt-categories '("tab by name" . tab))
@end lisp

That's it! But in case you are ever in a situation where you don't
already have commands that prompt for the targets you want, I'll
describe how writing your own command with appropriate @samp{category}
metadata looks:

@lisp
(defun my-select-tab-by-name (tab)
  (interactive
   (list
    (let ((tab-list (or (mapcar (lambda (tab) (cdr (assq 'name tab)))
                                (tab-bar-tabs))
                        (user-error "No tabs found"))))
      (completing-read
       "Tabs: "
       (lambda (string predicate action)
         (if (eq action 'metadata)
             '(metadata (category . tab))
           (complete-with-action
            action tab-list string predicate)))))))
  (tab-bar-select-tab-by-name tab))
@end lisp

As you can see, the built-in support for setting the category
meta-datum is not very easy to use or pretty to look at. To help with
this I recommend the @samp{consult--read} function from the excellent
@uref{https://github.com/minad/consult/, Consult} package. With that function we can rewrite the command as
follows:

@lisp
(defun my-select-tab-by-name (tab)
  (interactive
   (list
    (let ((tab-list (or (mapcar (lambda (tab) (cdr (assq 'name tab)))
                                (tab-bar-tabs))
                        (user-error "No tabs found"))))
      (consult--read tab-list
                     :prompt "Tabs: "
                     :category 'tab))))
  (tab-bar-select-tab-by-name tab))
@end lisp

Much nicer! No matter how you define the @samp{my-select-tab-by-name}
command, the first approach with Marginalia and prompt detection has
the following advantages: you get the @samp{tab} category for all the
@samp{tab-bar-*-bar-by-name} commands at once, also, you enhance built-in
commands, instead of defining new ones.

@item
@anchor{Defining and configuring a keymap for tab actions}Defining and configuring a keymap for tab actions


Let's say we want to offer select, rename and close actions for tabs
(in addition to Embark general actions, such as saving the tab name to
the kill-ring, which you get for free). Then this will do:

@lisp
(embark-define-keymap embark-tab-actions
  "Keymap for actions for tab-bar tabs (when mentioned by name)."
  ("s" tab-bar-select-tab-by-name)
  ("r" tab-bar-rename-tab-by-name)
  ("k" tab-bar-close-tab-by-name))

(add-to-list 'embark-keymap-alist '(tab . embark-tab-actions))
@end lisp

What if after using this for a while you feel closing the tab
without confirmation is dangerous? You have a couple of options:

@enumerate
@item
You can keep using the @samp{tab-bar-close-tab-by-name} command, but have
Embark ask you for confirmation:
@lisp
(push #'embark--confirm
      (alist-get 'tab-bar-close-tab-by-name
                 embark-pre-action-hooks))
@end lisp

@item
You can write your own command that prompts for confirmation and
use that instead of @samp{tab-bar-close-tab-by-name} in the above keymap:
@lisp
(defun my-confirm-close-tab-by-name (tab)
  (interactive "sTab to close: ")
  (when (y-or-n-p (format "Close tab '%s'? " tab))
    (tab-bar-close-tab-by-name tab)))
@end lisp

Notice that this is a command you can also use directly from @samp{M-x}
independently of Embark. Using it from @samp{M-x} leaves something to be
desired, though, since you don't get completion for the tab names.
You can fix this if you wish as described in the previous section.
@end enumerate
@end enumerate

@node New target example in regular buffers - short Wikipedia links
@subsection New target example in regular buffers - short Wikipedia links

Say you want to teach Embark to treat text of the form
@samp{wikipedia:Garry_Kasparov} in any regular buffer as a link to Wikipedia,
with actions to open the Wikipedia page in eww or an external browser
or to save the URL of the page in the kill-ring. We can take advantage
of the actions that Embark has preconfigured for URLs, so all we need
to do is teach Embark that @samp{wikipedia:Garry_Kasparov} stands for the URL
@samp{https://en.wikipedia.org/wiki/Garry_Kasparov}.

You can be as fancy as you want with the recognized syntax. Here, to
keep the example simple, I'll assume the link matches the regexp
@samp{wikipedia:[[:alnum:]_]+}. We will write a function that looks for a
match surrounding point, and returns an improper list of the form
@samp{'(url actual-url-of-the-page beg . end)} where @samp{beg} and @samp{end} are the
buffer positions where the target starts and ends, and are used by
Embark to highlight the target (if you have @samp{embark-highlight-indicator}
included in the list @samp{embark-indicators}).

@lisp
(defun my-short-wikipedia-link ()
  "Target a link at point of the form wikipedia:Page_Name."
  (save-excursion
    (let* ((beg (progn (skip-chars-backward "[:alnum:]_:") (point)))
           (end (progn (skip-chars-forward "[:alnum:]_:") (point)))
           (str (buffer-substring-no-properties beg end)))
      (save-match-data
        (when (string-match "wikipedia:\\([[:alnum:]_]+\\)" str)
          `(url 
            ,(format "https://en.wikipedia.org/wiki/%s"
                     (match-string 1 str))
            ,beg . ,end))))))

(add-to-list 'embark-target-finders 'my-short-wikipedia-link)
@end lisp

@node How does Embark call the actions?
@chapter How does Embark call the actions?

Embark actions are normal Emacs commands, that is, functions with an
interactive specification. In order to execute an action, Embark
calls the command with @samp{call-interactively}, so the command reads user
input exactly as if run directly by the user. For example the
command may open a minibuffer and read a string
(@samp{read-from-minibuffer}) or open a completion interface
(@samp{completing-read}). If this happens, Embark takes the target string
and inserts it automatically into the minibuffer, simulating user
input this way. After inserting the string, Embark exits the
minibuffer, submitting the input. (The immediate minibuffer exit can
be disabled for specific actions in order to allow editing the
input; this is done by adding the @samp{embark--allow-edit} function to the
appropriate entry of @samp{embark-target-injection-hooks}). Embark inserts
the target string at the first minibuffer opened by the action
command, and if the command happens to prompt the user for input
more than once, the user still interacts with the second and further
prompts in the normal fashion. Note that if a command does not
prompt the user for input in the minibuffer, Embark still allows you
to use it as an action, but of course, never inserts the target
anywhere. (There are plenty of examples in the default configuration
of commands that do not prompt the user bound to keys in the action
maps, most of the region actions, for instance.)

This is how Embark manages to reuse normal commands as actions. The
mechanism allows you to use as Embark actions commands that were not
written with Embark in mind (and indeed almost all actions that are
bound by default in Embark's action keymaps are standard Emacs
commands). It also allows you to write new custom actions in such a
way that they are useful even without Embark.

Staring from version 28.1, Emacs has a variable
@samp{y-or-n-p-use-read-key}, which when set to @samp{t} causes @samp{y-or-n-p} to use
@samp{read-key} instead of @samp{read-from-minibuffer}. Setting
@samp{y-or-n-p-use-read-key} to @samp{t} is recommended for Embark users because
it keeps Embark from attempting to insert the target at a @samp{y-or-n-p}
prompt, which would almost never be sensible. Also consider this as
a warning to structure your own action commands so that if they use
@samp{y-or-n-p}, they do so only after the prompting for the target.

Here is a simple example illustrating the various ways of reading
input from the user mentioned above. Bind the following commands to
the @samp{embark-symbol-map} to be used as actions, then put the point on
some symbol and run them with @samp{embark-act}:

@lisp
(defun example-action-command1 ()
  (interactive)
  (message "The input was `%s'." (read-from-minibuffer "Input: ")))

(defun example-action-command2 (arg input1 input2)
  (interactive "P\nsInput 1: \nsInput 2: ")
  (message "The first input %swas `%s', and the second was `%s'."
           (if arg "truly " "")
           input1
           input2))

(defun example-action-command3 ()
  (interactive)
  (message "Your selection was `%s'."
           (completing-read "Select: " '("E" "M" "B" "A" "R" "K"))))

(defun example-action-command4 ()
  (interactive)
  (message "I don't prompt you for input and thus ignore the target!"))

(define-key embark-symbol-map "X1" #'example-action-command1)
(define-key embark-symbol-map "X2" #'example-action-command2)
(define-key embark-symbol-map "X3" #'example-action-command3)
(define-key embark-symbol-map "X4" #'example-action-command4)
@end lisp

Also note that if you are using the key bindings to call actions,
you can pass prefix arguments to actions in the normal way. For
example, you can use @samp{C-u X2} with the above demonstration actions to
make the message printed by @samp{example-action-command2} more emphatic.
This ability to pass prefix arguments to actions is useful for some
actions in the default configuration, such as
@samp{embark-shell-command-on-buffer}.

@menu
* Non-interactive functions as actions::
@end menu

@node Non-interactive functions as actions
@section Non-interactive functions as actions

Alternatively, Embark does support one other type of action: a
non-interactive function of a single argument. The target is passed
as argument to the function. For example:

@lisp
(defun example-action-function (target)
  (message "The target was `%s'." target))

(define-key embark-symbol-map "X4" #'example-action-function)
@end lisp

Note that normally binding non-interactive functions in a keymap is
useless, since when attempting to run them using the key binding you
get an error message similar to ``Wrong type argument: commandp,
example-action-function''. In general it is more flexible to write
any new Embark actions as commands, that is, as interactive
functions, because that way you can also run them directly, without
Embark. But there are a couple of reasons to use non-interactive
functions as actions:

@enumerate
@item
You may already have the function lying around, and it is
convenient to simply reuse it.

@item
For command actions the targets can only be simple string, with
no text properties. For certain advanced uses you may want the
action to receive a string @emph{with} some text properties, or even a
non-string target.
@end enumerate

@node Embark Marginalia and Consult
@chapter Embark, Marginalia and Consult

Embark cooperates well with the @uref{https://github.com/minad/marginalia, Marginalia} and @uref{https://github.com/minad/consult, Consult} packages.
Neither of those packages is a dependency of Embark, but both are
highly recommended companions to Embark, for opposite reasons:
Marginalia greatly enhances Embark's usefulness, while Embark can help
enhance Consult.

In the remainder of this section I'll explain what exactly Marginalia
does for Embark, and what Embark can do for Consult.

@menu
* Marginalia::
* Consult::
@end menu

@node Marginalia
@section Marginalia

Embark comes with actions for symbols (commands, functions, variables
with actions such as finding the definition, looking up the
documentation, evaluating, etc.) in the @samp{embark-symbol-map} keymap, and
for packages (actions like install, delete, browse url, etc.) in the
@samp{embark-package-keymap}.

Unfortunately Embark does not automatically offers you these keymaps
when relevant, because many built-in Emacs commands don't report
accurate category metadata. For example, a command like
@samp{describe-package}, which reads a package name from the minibuffer,
does not have metadata indicating this fact.

In an earlier Embark version, there were functions to supply this
missing metadata, but they have been moved to Marginalia, which
augments many Emacs command to report accurate category metadata.
Simply activating @samp{marginalia-mode} allows Embark to offer you the
package and symbol actions when appropriate again. Candidate
annotations in the Embark collect buffer are also provided by the
Marginalia package:

@itemize
@item
If you install Marginalia and activate @samp{marginalia-mode}, Embark
Collect buffers will use the Marginalia annotations automatically.

@item
If you don't install Marginalia, you will see only the annotations
that come with Emacs (such as key bindings in @samp{M-x}, or the unicode
characters in @samp{C-x 8 RET}).
@end itemize

@node Consult
@section Consult

The excellent Consult package provides many commands that use
minibuffer completion, via the @samp{completing-read} function; plenty of its
commands can be considered enhanced versions of built-in Emacs
commands, and some are completely new functionality. One common
enhancement provided in all commands for which it makes sense is
preview functionality, for example @samp{consult-buffer} will show you a
quick preview of a buffer before you actually switch to it.

If you use both Consult and Embark you should install the
@samp{embark-consult} package which provides integration between the two. It
provides exporters for several Consult commands and also tweaks the
behavior of many Consult commands when used as actions with @samp{embark-act}
in subtle ways that you may not even notice, but make for a smoother
experience. You need only install it to get these benefits: Embark
will automatically load it after Consult if found.

The @samp{embark-consult} package provides the following exporters:

@itemize
@item
You can use @samp{embark-export} from @samp{consult-line}, @samp{consult-outline}, or
@samp{consult-mark} to obtain an @samp{occur-mode} buffer. As with the built-in
@samp{occur} command you use that buffer to jump to a match and after that,
you can then use @samp{next-error} and @samp{previous-error} to navigate to other
matches. You can also press @samp{e} to activate @samp{occur-edit-mode} and edit
the matches in place!

@item
You can export from any of the Consult asynchronous search commands,
@samp{consult-grep}, @samp{consult-git-grep}, or @samp{consult-ripgrep} to get a
@samp{grep-mode} buffer. Here too you can use @samp{next-error} and @samp{previous-error}
to navigate among matches, and, if you install the @uref{http://github.com/mhayashi1120/Emacs-wgrep/raw/master/wgrep.el , wgrep} package,
you can use it to edit the matches in place.
@end itemize

In both cases, pressing @samp{g} to revert the exported buffer will rerun the
Consult command you had exported from and re-enter the input you had
typed. You can then proceed to re-export if that's what you want, but
you can also edit the input changing the search terms or simply cancel
if you see you are done with that search.

The @samp{embark-consult} also contains some candidates collectors that allow
you to run @samp{embark-live} to get a live-updating table of contents for
your buffer:

@itemize
@item
@samp{embark-consult-outline-candidates} produces the outline headings of
the current buffer, using @samp{consult-outline}.
@item
@samp{embark-consult-imenu-candidates} produces the imenu items of
the current buffer, using @samp{consult-imenu}.
@item
@samp{embark-consult-imenu-or-outline-candidates} is a simple combination
of the two previous functions: it produces imenu items in buffers
deriving from @samp{prog-mode} and otherwise outline headings.
@end itemize

The way to configure @samp{embark-live} (or @samp{embark-collect} and @samp{embark-export}
for that matter) to use one of these function is to add it at the end
of the @samp{embark-candidate-collectors} list. The @samp{embark-consult} package by
default adds the last one, which seems to be the most sensible
default.

Besides those exporters and candidate collectors, the @samp{embark-consult}
package provides many subtle tweaks and small integrations between
Embark and Consult. For example, if you run @samp{embark-collect} from any of
the the @samp{consult-yank} family of commands, you'll see the Embark Collect
buffers has full multi-line kill-ring entries with zebra stripes, so
you can easily tell where they start and end.

Some examples of little tweaks provided by @samp{embark-consult} to the
behavior of Consult commands when used as Embark actions are:

@itemize
@item
The asynchronous search commands will start in the directory
associated to the Embark target if that target is a file, buffer,
bookmark or Emacs Lisp library.

@itemize
@item
For all other target types, a Consult search command (asynchronous
or not) will search for the text of the target but leave the
minibuffer open so you can interact with the Consult command.
@end itemize

@item
@samp{consult-imenu} will search for the target and take you directly to
the location if it matches a unique imenu entry, otherwise it will
leave the minibuffer open so you can navigate among the matches.
@end itemize

@node Resources
@chapter Resources

If you want to learn more about how others have used Embark here are
some links to read:

@itemize
@item
@uref{https://karthinks.com/software/fifteen-ways-to-use-embark/, Fifteen ways to use Embark}, a blog post by Karthik Chikmagalur.
@item
@uref{https://protesilaos.com/dotemacs/, Protesilaos Stavrou's dotemacs}, look for the section called
``Extended minibuffer actions and more (embark.el and
prot-embark.el)''
@end itemize

And some videos to watch:

@itemize
@item
@uref{https://protesilaos.com/codelog/2021-01-09-emacs-embark-extras/, Embark and my extras} by Protesilaos Stavrou.
@item
@uref{https://youtu.be/qpoQiiinCtY, Embark -- Key features and tweaks} by Raoul Comninos on the
Emacs-Elements YouTube channel.
@item
@uref{https://youtu.be/WsxXr1ncukY, Livestreamed: Adding an Embark context action to send a stream
message} by Sacha Chua.
@item
@uref{https://youtu.be/qk2Is_sC8Lk, System Crafters Live! - The Many Uses of Embark} by David Wilson.
@item
@uref{https://youtu.be/5ffb2at2d7w, Using Emacs Episode 80 - Vertico, Marginalia, Consult and Embark} by
Mike Zamansky.
@end itemize

@node Contributions
@chapter Contributions

Contributions to Embark are very welcome. There is a @uref{https://github.com/oantolin/embark/issues/95, wish list} for
actions, target finders, candidate collectors and exporters. For other
ideas you have for Embark, feel free to open an issue on the @uref{https://github.com/oantolin/embark/issues, issue
tracker}. Any neat configuration tricks you find might be a good fit
for the @uref{https://github.com/oantolin/embark/wiki, wiki}.

Code contributions are very welcome too, but since Embark is now on
GNU ELPA, copyright assignment to the FSF is required before you can
contribute code.

@node Acknowledgments
@chapter Acknowledgments

While I, Omar Antolín Camarena, have written most of the Embark code
and remain very stubborn about some of the design decisions, Embark
has received substantial help from a number of other people which this
document has neglected to mention for far too long. In particular,
Daniel Mendler has been absolutely invaluable, implementing several
important features, and providing a lot of useful advice.

Code contributions:

@itemize
@item
@uref{https://github.com/minad, Daniel Mendler}
@item
@uref{https://github.com/clemera/, Clemens Radermacher}
@item
@uref{https://codeberg.org/jao/, José Antonio Ortega Ruiz}
@item
@uref{https://github.com/iyefrat, Itai Y@. Efrat}
@item
@uref{https://github.com/a13, a13}
@item
@uref{https://github.com/jakanakaevangeli, jakanakaevangeli}
@item
@uref{https://github.com/mihakam, mihakam}
@item
@uref{https://github.com/leungbk, Brian Leung}
@item
@uref{https://github.com/karthink, Karthik Chikmagalur}
@item
@uref{https://github.com/roshanshariff, Roshan Shariff}
@item
@uref{https://github.com/condy0919, condy0919}
@item
@uref{https://github.com/DamienCassou, Damien Cassou}
@item
@uref{https://github.com/JimDBh, JimDBh}
@end itemize

Advice and useful discussions:

@itemize
@item
@uref{https://github.com/minad, Daniel Mendler}
@item
@uref{https://gitlab.com/protesilaos/, Protesilaos Stavrou}
@item
@uref{https://github.com/clemera/, Clemens Radermacher}
@item
@uref{https://github.com/hmelman/, Howard Melman}
@item
@uref{https://github.com/astoff, Augusto Stoffel}
@item
@uref{https://github.com/bdarcus, Bruce d'Arcus}
@item
@uref{https://github.com/jdtsmith, JD Smith}
@item
@uref{https://github.com/karthink, Karthik Chikmagalur}
@item
@uref{https://github.com/jakanakaevangeli, jakanakaevangeli}
@item
@uref{https://github.com/iyefrat, Itai Y@. Efrat}
@item
@uref{https://github.com/mohkale, Mohsin Kaleem}
@end itemize

@bye