diff --git a/README.md b/README.md
index 854300a..91484ff 100644
--- a/README.md
+++ b/README.md
@@ -1,51 +1,25 @@
 # Raspiducky
 
-Credits to Original Authors:
+A Keyboard emulator like Rubber Ducky build over Raspberry Pi Zero
 
-* Duckberry Pi: Jeff L. (Renegade_R - renegade_r65@hotmail.com)
-* DroidDucky by Andrej Budincevic (https://github.com/anbud/DroidDucky)
-* hardpass by girst (https://github.com/girst/hardpass)
-
-### Install:
-
-1) Flash the latest Raspbian Jessie image to an SD card
-
-2) Copy all the files (hid-gadget-test.c, duckpi.sh, usleep.c, run_payload.sh, hid.sh) to /home/pi
-
-3) Compile the hid-gadget-test program, this handles moving the text to the Human Interface Device driver:
-
-       gcc hid-gadget-test.c -o hid-gadget-test
-
-4) Compile usleep, this is a basic function which is not natively supported in Raspbian and is used to account for delays in the program:
-
-       make usleep
-
-5) Ensure all files and scripts are executable (chmod 755 <file>)
+### Configuration
 
-6) Activate the dwc2 drivers which allows the device to function in host mode when not connected to a PC:
+* Run install script
 
-       echo "dtoverlay=dwc2" | sudo tee -a /boot/config.txt
+      chmod 777 install.sh
+      ./install.sh
 
-9) Place dwc2 and libcomposite in the modules file to boot with the OS:
+* Install a payload
 
-       echo "dwc2" | sudo tee /etc/modules
-       echo "libcomposite" | sudo tee /etc/modules
-
-10) Copy the following into your /etc/rc.local file.  This allows you to place a "payload.dd" script in the "boot" drive that appears when you plug the SD card into a computer, it will then copy the file and format it for Unix (because Windows machines format the text differently):
-
-        /home/pi/hid.sh
-        sleep 3
-        /home/pi/run_payload.sh
-
-11) Copy the actual payload into /boot, this directory can also be accessed in Windows by simply placing your micro SD card into a card reader and copying it to the drive that appears.
-
-        cat payloads/open_terminal/open_mint_terminal.dd payloads/backdoor/bind_shell.dd > /boot/payload.dd
-
-12) Place SD card into the Raspberry Pi Zero, plug it into the target host machine via USB cable in the peripheral micro USB port, NOT THE POWER PORT.  A power cord is not required as the Pi Zero will take power directly from the host machine.
-
-13) Watch the script execute on the host machine
+      cat payloads/open_terminal/open_mint_terminal.dd payloads/backdoor/bind_shell.dd > /boot/payload.dd
 
 ### Resources:
 
 * Premade Ducky Scripts: https://github.com/hak5darren/USB-Rubber-Ducky/wiki
 * Original USB Rubber Ducky: http://usbrubberducky.com/#!index.md
+
+### Credits:
+
+* Duckberry Pi: Jeff L. (Renegade_R - renegade_r65@hotmail.com)
+* DroidDucky by Andrej Budincevic (https://github.com/anbud/DroidDucky)
+* hardpass by girst (https://github.com/girst/hardpass)