Skip to content

Latest commit

 

History

History
61 lines (41 loc) · 1.48 KB

FullExample.rst

File metadata and controls

61 lines (41 loc) · 1.48 KB

Full Example

An example of a fully worked through configuration.

Cisco IOS

When setting up the peer:

router bgp 65000
  neighbor 10.1.1.1 remote-as 64512
  neighbor 10.1.1.1 prefix-list EXAMPLE-in in
  neighbor 10.1.1.1 prefix-list AS65000 out
  neighbor 10.1.1.1 route-map EXAMPLE-in in
  neighbor 10.1.1.1 route-map AS65000 out
route-map EXAMPLE-in permit 10
  match as-path EXAMPLE-in

Automatically generated by bgpq3, once per day:

no ip prefix-list EXAMPLE-in
  ip prefix-list EXAMPLE-in permit 192.0.2.0/24
no ip as-path access-list EXAMPLE-in
  ip as-path access-list EXAMPLE-in permit ^64512(_64512)*$
  ip as-path access-list EXAMPLE-in permit ^64512(_[0-9]+)*_(65001|65002|65003)$
clear ip bgp 10.1.1.1 soft

Note that "soft" will do a route-refresh is supported, or soft-reconfiguration if configured. It will not reset the session.

Cisco IOS-XR

Once IOS finished, re-run bgpq3 with "-X" -- note that only prefix lists are supported.

Juniper JUNOS

Once IOS finished, re-run bgpq3 with "-J" for both prefix lists and as-sets.

Brocade IronWare

While very Cisco like, features will need to be tested before posting any code here.

Arista EOS

While very Cisco like, features will need to be tested before posting any code here.

BIRD

Once IOS finished, re-run bgpq3 with "-b" for both prefix lists and as-sets.

and more...