CTS 2.2.0.172 installed and executed, but cts report have error message - exception

[housemic]

Dear Intel,
the issue is related to #62.

my detail logs are in attachment -
2018-05-30-CTS-2-2-Command-and-Report.zip

Question 1 -
CTS 2.2.0.172 installed and list test packages success,
executed test scripts but cts report have error message - exception
when I run the command -
cts execute tests Rack_Scale_2_1_PSME --config_files ./config/psme.ini

---

Error messages example -

MESSAGE	2018-05-23 16:27:06	-Get https://10.3.0.2/redfish/v1
ERROR	2018-05-23 16:27:06	Unknown exception '<type 'exceptions.TypeError'>:can't pickle instancemethod 
				objects' on Get resource url=https://10.3.0.2/redfish/v1 : ERRORTraceback (most 
				recent call last):
ERROR	2018-05-23 16:27:06	 File "/usr/local/lib/python2.7/dist-packages/cts_core/commons/api_caller.py", 
				line 132, in _perform_call
ERROR	2018-05-23 16:27:06	   self._register_request(http_method, kwargs, response, url)
ERROR	2018-05-23 16:27:06	 File "/usr/local/lib/python2.7/dist-packages/cts_core/commons/api_caller.py", 
				line 194, in _register_request

---

the results are in attachment - \screenshot\Screenshot-x.png

CTS reports are in attachment - \cts_report\

my installation steps are in attachment - \installation\

cts log in /var/log/cts/ is in attachment - \cts_log\

House

[RobertCMa]

Hi @housemic ,

While running cts execute, please try adding sudo and let's clarify the access permission.

sudo cts execute tests Rack_Scale_2_1_PSME --config_files ./config/psme.ini

[tmacieje]

Hello @housemic

Since CTS v2.2, the tool is distributed with the installer.
INSTALL.sh has the ability to repair some of the incorrect permissions.

You can try to repair permissions with:
[sudo] bash INSTALL.sh --repair

To learn more about the possibilities of the installer, please use:
--help or -i arg for a more interactive mode.

The previous version of CTS (2.1) may cause problems.
You can WIPE ALL old data and install a fresh version with:
[sudo] bash INSTALL.sh --FactoryInstall

If there is a problem with PIP, please run:
[sudo] python -m pip install -U "pip<10"

[housemic]

Dear RobertCMa,
I use ls -al to check tests scripts that owners are user, and have execution privilege.
and add sudo in command -
sudo cts execute tests Rack_Scale_2_1_POD_Manager --config_files ./config/podm.ini

still have exception error messages that the same as cts log in /var/log/cts/ is in attachment - \cts_log
House

[housemic]

Dear tmacieje,
the detail results are in attachment -
2018-06-04-comp1-cts-2-2-report.zip

I use these commands -
sudo bash INSTALL.sh --FactoryInstall
sudo bash INSTALL.sh --repair
sudo python -m pip install -U "pip<10"
sudo cts execute tests Rack_Scale_2_1_POD_Manager --config_files ./config/podm.ini

and run CTS again,
CTS reports still have exception error messages -
MESSAGE 2018-06-04 21:06:28 -Get https://10.3.0.1:9443/redfish/v1
ERROR 2018-06-04 21:06:28 Unknown exception '<type 'exceptions.TypeError'>:can't pickle instancemethod
objects' on Get resource url=https://10.3.0.1:9443/redfish/v1 : ERRORTraceback
(most recent call last):
ERROR 2018-06-04 21:06:28 File "/usr/local/lib/python2.7/dist-packages/cts_core/commons/api_caller.py",
line 132, in _perform_call

CTS reports are in attachment - \cts_report-2018-06-04\

House

[RobertCMa]

Hi @housemic,

From the podm log, the exception failed at the early stage. Besides the parameters are needed to be ready in the configuration file, which can refer to #64, it's suggested to make sure PODM can respond properly with manual operation from the system running cts, such as below:

sudo curl -v -k -u admin:admin -H "Content-Type:application/json" -X GET https://PODM-IP:9443/redfish/v1/ | python -m json.tool

[RobertCMa]

Hi @housemic,

This issue will be closed due to inactivity. Feel free to open a new one if needed.

[housemic]

Dear RobertCMa ,
About the PODM test commands (in attachment - 2018-06-04-comp1-cts-2-2-report.zip - cts_report-2018-06-04\cts_report_xx) , I will add hardware check list and re-execute again.
thank you.
House

[housemic]

Dear RobertCMa ,
new CTS reports are in Attachment -
use CTS 2,2 to run test packages 2.1 -
2018-06-26-comp1-cts-2-2-setup-podm-psme.zip

PODM CTS report is in - attachment - test-report-2
PSME CTS report is in - attachment - test-report-3

still has error message - exception
House

[housemic]

Dear RobertCMa ,
After I run curl command -
sudo curl -v -k -u admin:admin -H "Content-Type:application/json" -X GET https://PODM-IP:9443/redfish/v1/ | python -m json.tool

PODM can response some information.
Note: Unnecessary use of -X or --request, GET is already inferred.

• Rebuilt URL to: admin:admin/
  % Total % Received % Xferd Average Speed Time Time Time Current
  Dload Upload Total Spent Left Speed
  0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0* Could not resolve host: admin
• Closing connection 0
  curl: (6) Could not resolve host: admin
  Note: Unnecessary use of -X or --request, GET is already inferred.
• Trying 10.3.0.1...
• Connected to 10.3.0.1 (10.3.0.1) port 9443 (README.md file update #1)
• found 148 certificates in /etc/ssl/certs/ca-certificates.crt
• found 597 certificates in /etc/ssl/certs
• ALPN, offering http/1.1
• SSL connection using TLS1.2 / ECDHE_RSA_AES_128_GCM_SHA256

detail is in attachment -
2018-06-26-comp1-curl-GET.zip

[housemic]

Dear RobertCMa ,
CTS 2.2 still has exception error messages,
and the error is -
can't pickle instancemethod
I find information about the message in google,
it seems python 2.7.3 issue that some web site say,
Could you have some comments to survey the error message ?
thank you
House

[tmacieje]

@housemic, this generic error can't pickle instancemethod should be fixed in next CTS release.

[housemic]

Dear tmacieje,
thank you.
House