mt7915 does not changed txpower with openwrt v24.10.0-rc2

[squarrel90]

my /etc/config/wireless and iwinfo result is as follows.
I cannot change txpower with mt7915.

---

/etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path '1a143000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option band '5g'
option htmode 'HE80'
option channel '149'
option country 'IN'
option cell_density '0'
option txpower '10'

config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'mesh'
option encryption 'sae'
option key 'xxxxxxx'
option mesh_id 'XXXXX'

iwinfo
wl0-mesh0 ESSID: "XXXXX"
Access Point: xx:xx:xx:xx:xx:xx
Mode: Mesh Point Channel: 149 (5.745 GHz) HT Mode: VHT80
Center Channel 1: 155 2: unknown
Tx-Power: 27 dBm Link Quality: unknown/70
Signal: unknown Noise: unknown
Bit Rate: unknown
Encryption: none
Type: nl80211 HW Mode(s): 802.11ac/ax/b/g/n
Hardware: 14C3:7915 14C3:7915 [MediaTek MT7915E]
TX power offset: none
Frequency offset: none
Supports VAPs: yes PHY name: wl0

[wirl]

This could be related to mine and some other issues with this chip and tx power. We can only hope an OpenWrt developer takes interest in fixing the driver.