Collect 433Mhz weather sensor data and publish to mqtt.
This software is designed to use an rfxcom usb receiver or an rtl 433 compatible receiver, and relay the data found on it over an mqtt bus so that it can be consumed by other software, such as Home Assistant.
You will need a Linux system (raspberry pi is sufficient) and a 433 MHz receiver. This supports either rfxcom receivers for rtl-sdr dongles.
- Install hardware + support code
- If using an rfxcom receiver, all supporting software is included.
- If using an rtl-sdr dongle, you must also install the rtl433 project from source.
- pip install arwn
Copy the config.yml.sample file and modify it accordingly.
Sean Dague