Skip to content

The blockchain node for BitGreen Network. Based on Substrate framework from Parity Technology

License

Notifications You must be signed in to change notification settings

AtlasPilotPuppy/bitgreen-node

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

BITGREEN Node

This is the BitGreen Node based on Substrate Framework 3.x

This repository contains the Bitgreen node and associated tools to (1) issue Verified Carbon Credit (Carbon Credits) in a decentralized and transparent web3 environment, (2) purchase Carbon Credits for both the voluntary and mandatory markets, and (3) retire* those credits to remove them from circulation.

*Retiring a carbon credit is the act of consuming it for offset purposes. Each Carbon Credit may be purchased and sold multiple times, but retired only once. All Carbon Credits are created for the purpose of being retired.

Bitgreen provides a convenient and easy-to-use platform for the aforementioned Carbon Credit management processes and our support staff is available if you require any assistance. Please contact us at [contact] if you need help or would like additional information.

New Features

  • Smart Contracts Support in native !Ink language a Rust based embedded domain specific language.
  • Smart Contracts in Solidity language,compatible with Ethereum Dapps. You can create and execute a smart contract written for Ethereum without changes.
  • ERC20 - Fungible Tokens.
  • NFT - Non Fungible Tokens.
  • DAO - Decentralized Autonomous Organization.

Hardware Requirements

  • Ram: The Rust compiler uses a lot of ram to build the node, please use machine with at the least 8 GB RAM.
  • Disk: Disk space grows day by day, 100 GB disk is a good choice for now.

Installation

Follow these steps to get started with the BitGreen Node:

cargo run --release -- --dev --tmp

You can build without launching:

cargo build --release -p bitg-node (for standalone node)
cargo build --release -p bitg-parachain (for parachain)

Embedded Docs

Once the project has been built, the following command can be used to explore all parameters and subcommands:

./target/release/bitg-node -h

Run

The provided cargo run command will launch a temporary node and its state will be discarded after you terminate the process. After the project has been built, there are other ways to launch the node.

Single-Node Development Chain

This command will start the single-node development chain with persistent state:

./target/release/bitg-node --dev

Purge the development chain's state:

./target/release/bitg-node purge-chain --dev

Start the development chain with detailed logging:

RUST_LOG=debug RUST_BACKTRACE=1 ./target/release/bitg-node -lruntime=debug --dev

Testnet Node

You can run the node as part of the current Testnet:

./target/release/bitg-node --chain assets/chain_spec_testnet_raw.json --port 30333 --name yourpreferredname --rpc-cors all

Please consider:

  1. TESTNET can be reset to the genesis anytime;
  2. the BITG on TESTNET has no value, they are just for testings.

Testnet Validator

You can setup a validator on testnet. A validator is a node that writes the blocks of data and rewards in BITG.
Please follow this guide.

How to get BITG for Testnet

You can get 100 free BITG on Testnet using our free minter available at:
https://testnet.bitgreeb.org:8443

Cache Engine

We developed a light cache engine to query the transactions by account date/time limits and transaction id (txhash).
It's reachable at:
https://testnet.bitgreen.org:9443
You can install in your node as from instructions here

Bugs Reporting

For bug reporting, please open an issue on our Git Repo:
https://github.com/bitgreen/bitg-node/issues

Secure Web Socket

You might want to host a node on one server and then connect to it from a UI hosted on another. This will not be possible unless you set up a secure proxy for websocket connections. Let's see how we can set up WSS on a remote Bitgreen node.

Note: this should only be done for sync nodes used as back-end for some dapps or projects. Never open websockets to your validator node - there's no reason to do that and it can only lead to security issues.

In this guide we'll be using Debian 10.
We'll assume you're using a similar OS, and that you have nginx installed (if not, run sudo apt-get install nginx).
Start the node, for example:

./target/release/bitg-node --chain testnet --rpc-cors all

The --rpc-cors mode needs to be set to all so that all external connections are allowed.
To get WSS (secure websocket), you need an SSL certificate.
Get a dedicated domain, redirect a domain name to your IP address, setting up an Nginx server for that domain, and finally following LetsEncrypt instructions for Nginx setup. This will auto-generate an SSL certificate and include it in your Nginx configuration. Now it's time to tell Nginx to use these certificates. The server block below is all you need, but keep in mind that you need to replace some placeholder values.
Notably:
SERVER_ADDRESS should be replaced by your domain name if you have it, or your server's IP address if not.
CERT_LOCATION should be /etc/letsencrypt/live/YOUR_DOMAIN/fullchain.pem if you used Certbot, or /etc/ssl/certs/nginx-selfsigned.crt if self-signed.
CERT_LOCATION_KEY should be /etc/letsencrypt/live/YOUR_DOMAIN/privkey.pem if you used Certbot, or /etc/ssl/private/nginx-selfsigned.key if self-signed.
CERT_DHPARAM should be /etc/letsencrypt/ssl-dhparams.pem if you used Certbot, and /etc/ssl/certs/dhparam.pem if self-signed.
Note that if you used Certbot, it should have made the path insertions below for you if you followed the official instructions. Here an example of configuration of nginx (/etc/nginx/sites-available/default)

server {

        server_name SERVER_ADDRESS;

        root /var/www/html;
        index index.html;

        location / {
          try_files $uri $uri/ =404;

          proxy_pass http://localhost:9944;
          proxy_set_header X-Real-IP $remote_addr;
          proxy_set_header Host $host;
          proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

          proxy_http_version 1.1;
          proxy_set_header Upgrade $http_upgrade;
          proxy_set_header Connection "upgrade";
        }

        listen [::]:443 ssl ipv6only=on;
        listen 443 ssl;
        ssl_certificate /etc/letsencrypt/live/testnet.bitgreen.org/fullchain.pem; # managed by Certbot
        ssl_certificate_key /etc/letsencrypt/live/testnet.bitgreen.org/privkey.pem; # managed by Certbot

        ssl_session_cache shared:cache_nginx_SSL:1m;
        ssl_session_timeout 1440m;

        ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
        ssl_prefer_server_ciphers on;

        ssl_ciphers "ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS";
        ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot
}

Firewall Configuration

For a Bitgreen Node you should open the ports: 9933/TCP and 9934/TCP.
If you want to reach the secure websocket, you should open 443/TCP. A validator should not expose the RPC interface to the public.
Here an example of a firewall configuration for a Linux/Debian 10.

Accounts

Address Format

The address format used is SS58. SS58 is a modification of Base-58-check from Bitcoin with some minor modifications. Notably, the format contains an address type prefix that identifies an address as belonging to a specific substrate network.
We are using the prefix= "5". For example a valid address is: 5DFJF7tY4bpbpcKPJcBTQaKuCDEPCpiz8TRjpmLeTtweqmXL

Address Generation

A valid account only requires a private key that can sign on one of the supported curves and signature schemes. Most wallets take many steps from a mnemonic phrase to derive the account key, which affects the ability to use the same mnemonic phrase in multiple wallets.
Wallets that use different steps will arrive at a different set of addresses from the same mnemonic.

Seed Generation

Most wallets generate a mnemonic phrase for users to back up their wallets and generate a private key from the mnemonic.
Not all wallets use the same algorithm to convert from mnemonic phrase to private key.
Polkadot-js library uses the BIP39 dictionary for mnemonic generation, but use the entropy byte array to generate the private key, while full BIP39 wallets (like Ledger) use 2048 rounds of PBKDF2 on the mnemonic. As such, the same mnemonic will not generate the same private keys. See Substrate BIP39 for more information.

Cryptography

Bitgreen supports the following cryptographic key pairs and signing algorithms:

  • Ed25519
  • Sr25519 - Schnorr signatures on the Ristretto group
  • ECDSA signatures on secp256k1
    Note that the address for a secp256k1 key is the SS58 encoding of the hash of the public key in order to reduce the public key from 33 bytes to 32 bytes.

Account Data

Account balance information is stored in a strructure "AccountData". Bitgreen primarily deals with two types of balances: free and reserved.
For most operations, free balance is what you are interested in. It is the "power" of an account in staking and governance.
Reserved balance represents funds that have been set aside by some operation and still belong to the account holder, but cannot be used.
Locks are an abstraction over free balance that prevent spending for certain purposes.
Several locks can operate on the same account, but they overlap rather than add.
Locks are automatically added onto accounts when tasks are done on the network (e.g. leasing a parachain slot or voting).
For example, an account could have a free balance of 200 BITG with two locks on it: 150 BITG for Transfer purposes and 100 BITG for Reserve purposes.
The account could not make a transfer that brings its free balance below 150 BITG, but an operation could result in reserving BITG such that the free balance is below BITG, but above 100 BITG.
Bonding tokens for staking and voting in governance referenda both utilize locks.
Vesting is another abstraction that uses locks on free balance.
Vesting sets a lock that decreases over time until all the funds are transferable.

Balances Module

The Balances module provides functionality for handling accounts and balances.
The Balances module provides functions for:

  • Getting and setting free balances.
  • Retrieving total, reserved and unreserved balances.
  • Repatriating a reserved balance to a beneficiary account that exists.
  • Transferring a balance between accounts (when not reserved).
  • Slashing an account balance.
  • Account creation and removal.
  • Managing total issuance.
  • Setting and managing locks.
    Further details are available here

Smart Contracts (Web Assembly)

BitGreen has a strong support for smart contracts written in RUST language

Smart Contracts (Ethereum Virtual Machine)

BitGreen has a great support for smart contracts written in Solidity language

Assets (Fungible Tokens)

A specific module for fungible tokens (ERC20) is included in the blockchain node.

Staking (for Validators)

A specific module is available to stake and un-stake funds to qualify as validator of the blockchain.
A validator gains BITG for every new block written. The block writing allow to the top 250 validators for stakes locked.
Here is the documentation.

Decentralized Autonomous Organization

BitGreen blockchain has specific support for the Decentralized Autonoumous Organization.

Impact Actions

A custom module to manage the "Impact Actions" has been created on Bitgreen blockchain.

Verified Carbon Units

BitGreen blockchain has specific support for the [Verified Carbon Units.](doc/Carbon Credit.md)

Development Tools

You can interact with our testing node:

testnode.bitgreen.org

using the web app hosted here:
https://polkadot.js.org/apps
To configure, click on the top left menu option and set the "Custom Node" field with 'wss://testnode.bitgreen.org'
You may get and error about "Not recognised data types".
Click on "Settings","Developer" and copy/paste the data types of this blockchain.

Development Libraries

JavaScript - Polkadot-JS API
The Polkadot-JS API is a javascript library of interfaces for communicating with Substrate nodes like BitGreen node.
The API provides application developers the ability to query a node and submit signed transaction using Javascript.
A specific integration guide to JavaScript/Bitgreen is available.

JavaScript Polkadot-JS Extension
The Polkadot-JS Extension is a simple extension for managing accounts in a browser extension and allowing the signing of extrinsics using these accounts.
It also provides simple interface for interacting with extension-compliant dApps.

Python - py-substrate-interface
py-substrate-interface is a Python library for interacting with the BitGreen RPC.
It supports a wide range of capabilities and powers the Polkascan multi-chain block explorer. This library is maintained by Polkascan Foundation.

Rust - Substrate-subtxt A Rust library to submit extrinsics to BitGreen node via RPC.

Kotlin - Substrate-client-Kotlin Substrate-client-kotlin is client library to interact with a substrate-based chain like BitGreen. It uses the API available from the RPC endpoint only (no sidecar). As of today it provides the following functionality:

  • compatible with substrate 3.0
  • ed25519 wallet creation
  • get account info (balance)
  • sign extrinsic and send (immortal era)
  • estimate fee

About

The blockchain node for BitGreen Network. Based on Substrate framework from Parity Technology

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Rust 66.5%
  • JavaScript 18.6%
  • Python 7.0%
  • TypeScript 3.3%
  • Solidity 2.0%
  • Shell 1.3%
  • Other 1.3%