🧑‍💻 Includes in Conditionals (for code dimming) (#27387)

Marlin/Configuration_adv.h

@@ -2560,7 +2560,7 @@
 
 /**
  * Minimum stepper driver pulse width (in ns)
- * If undefined, these defaults (from Conditionals_adv.h) apply:
+ * If undefined, these defaults (from Conditionals-4-adv.h) apply:
  *     100 : Minimum for TMC2xxx stepper drivers
  *     500 : Minimum for LV8729
  *    1000 : Minimum for A4988 and A5984 stepper drivers
@@ -2574,7 +2574,7 @@
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
- * If undefined, these defaults (from Conditionals_adv.h) apply:
+ * If undefined, these defaults (from Conditionals-4-adv.h) apply:
  *  5000000 : Maximum for TMC2xxx stepper drivers
  *  1000000 : Maximum for LV8729 stepper driver
  *   500000 : Maximum for A4988 stepper driver

Marlin/src/inc/Conditionals_axes.h → Marlin/src/inc/Conditionals-1-axes.h

@@ -22,10 +22,16 @@
 #pragma once
 
 /**
- * Conditionals_axes.h
+ * Conditionals-1-axes.h
  * Conditionals that need to be set before Configuration_adv.h or pins.h
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "MarlinConfigPre-1-axes.h"
+//========================================================
+
 /**
  * Extruders have some combination of stepper motors and hotends
  * so we separate these concepts into the defines:

Marlin/src/inc/Conditionals_LCD.h → Marlin/src/inc/Conditionals-2-LCD.h

@@ -22,10 +22,16 @@
 #pragma once
 
 /**
- * Conditionals_LCD.h
+ * Conditionals-2-LCD.h
  * Conditionals that need to be set before Configuration_adv.h or pins.h
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "Conditionals-1-axes.h"
+//========================================================
+
 // Support for SD Card and other file storage
 #if ENABLED(SDSUPPORT)
   #define HAS_MEDIA 1

Marlin/src/inc/Conditionals_etc.h → Marlin/src/inc/Conditionals-3-etc.h

@@ -22,10 +22,16 @@
 #pragma once
 
 /**
- * Conditionals_etc.h
+ * Conditionals-3-etc.h
  * Conditionals that need to be set before Configuration_adv.h or pins.h
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "Conditionals-2-LCD.h"
+//========================================================
+
 #ifndef STRING_CONFIG_H_AUTHOR
   #define STRING_CONFIG_H_AUTHOR "(anonymous)"
 #endif

Marlin/src/inc/Conditionals_adv.h → Marlin/src/inc/Conditionals-4-adv.h

@@ -22,10 +22,16 @@
 #pragma once
 
 /**
- * Conditionals_adv.h
+ * Conditionals-4-adv.h
  * Conditionals set before pins.h and which depend on Configuration_adv.h.
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "MarlinConfigPre-4-adv.h"
+//========================================================
+
 #if ENABLED(MARLIN_SMALL_BUILD)
   #undef EEPROM_CHITCHAT
   #undef CAPABILITIES_REPORT

Marlin/src/inc/Conditionals_post.h → Marlin/src/inc/Conditionals-5-post.h

@@ -22,10 +22,16 @@
 #pragma once
 
 /**
- * Conditionals_post.h
+ * Conditionals-5-post.h
  * Internal defines that depend on Configurations and Pins but are not user-editable.
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "MarlinConfigPre-5-post.h"
+//========================================================
+
 #ifdef GITHUB_ACTIONS
   // Extras for CI testing
 #endif
@@ -50,7 +56,7 @@
 // Determine which type of 'EEPROM' is in use
 #if ENABLED(EEPROM_SETTINGS)
   // EEPROM type may be defined by compile flags, configs, HALs, or pins
-  // Set additional flags to let HALs choose in their Conditionals_post.h
+  // Set additional flags to let HALs choose in their Conditionals-5-post.h
   #if ANY(FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SDCARD_EEPROM_EMULATION, QSPI_EEPROM)
     #define USE_EMULATED_EEPROM 1
   #elif ANY(I2C_EEPROM, SPI_EEPROM)

Marlin/src/inc/Conditionals_type.h → Marlin/src/inc/Conditionals-6-type.h

@@ -22,11 +22,17 @@
 #pragma once
 
 /**
- * Conditionals_type.h
+ * Conditionals-6-type.h
  * Internal defines that depend on Configurations and Pins but are not user-editable.
  * Define conditionals in this file if they depend on core/types.h.
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "MarlinConfigPre-6-type.h"
+//========================================================
+
 #ifdef GITHUB_ACTIONS
   // Extras for CI testing
 #endif

Marlin/src/inc/MarlinConfig.h

@@ -25,30 +25,11 @@
 // Prefix header for all Marlin sources
 //
 
-#include "MarlinConfigPre.h"
-
-#ifdef __MARLIN_DEPS__
-  #include "../HAL/shared/fauxpins.h"
-#else
-  #include "../HAL/HAL.h"
-#endif
-
-#include "../pins/pins.h"
+#include "MarlinConfigPre-6-type.h" // Include even with __MARLIN_DEPS__
 
 #ifndef __MARLIN_DEPS__
-  #include HAL_PATH(.., timers.h)
-  #include HAL_PATH(.., spi_pins.h)
-#endif
-
-#include "Conditionals_post.h"
-
-#ifndef __MARLIN_DEPS__
-
-  #include HAL_PATH(.., inc/Conditionals_post.h)
-
-  #include "../core/types.h"  // Ahead of sanity-checks
 
-  #include "Conditionals_type.h"
+  #include "Conditionals-6-type.h"
   #include HAL_PATH(.., inc/Conditionals_type.h)
 
   #include "Changes.h"

Marlin/src/inc/MarlinConfigPre-1-axes.h

@@ -0,0 +1,53 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef __MARLIN_FIRMWARE__
+#define __MARLIN_FIRMWARE__
+#endif
+
+#if __has_include("../../Config.h")
+  #include "../../Config.h"
+#else
+  #define USE_STD_CONFIGS 1
+#endif
+
+#include <stdint.h>
+
+#ifndef __MARLIN_DEPS__
+  #include "../HAL/platforms.h"
+#endif
+
+#include "../core/macros.h"
+#include "../core/boards.h"
+
+#if USE_STD_CONFIGS
+  #include "../../Configuration.h"
+#endif
+
+#ifdef CUSTOM_VERSION_FILE
+  #if __has_include(STRINGIFY(../../CUSTOM_VERSION_FILE))
+    #include STRINGIFY(../../CUSTOM_VERSION_FILE)
+  #endif
+#endif
+
+#include "Version.h"

Marlin/src/inc/MarlinConfigPre-4-adv.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "Conditionals-3-etc.h"
+
+#ifndef __MARLIN_DEPS__
+  #include HAL_PATH(.., inc/Conditionals_LCD.h)
+#endif
+
+#include "../core/drivers.h"
+
+#if USE_STD_CONFIGS
+  #include "../../Configuration_adv.h"
+#endif

Marlin/src/inc/MarlinConfigPre-5-post.h

@@ -0,0 +1,37 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "MarlinConfigPre.h"
+
+#ifdef __MARLIN_DEPS__
+  #include "../HAL/shared/fauxpins.h"
+#else
+  #include "../HAL/HAL.h"
+#endif
+
+#include "../pins/pins.h"
+
+#ifndef __MARLIN_DEPS__
+  #include HAL_PATH(.., timers.h)
+  #include HAL_PATH(.., spi_pins.h)
+#endif

Marlin/src/inc/MarlinConfigPre-6-type.h

@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "MarlinConfigPre-5-post.h"
+#include "Conditionals-5-post.h"
+
+#ifndef __MARLIN_DEPS__
+  #include HAL_PATH(.., inc/Conditionals_post.h)
+  #include "../core/types.h"  // Ahead of sanity-checks
+#endif

Marlin/src/inc/MarlinConfigPre.h

@@ -21,55 +21,13 @@
  */
 #pragma once
 
-#ifndef __MARLIN_FIRMWARE__
-#define __MARLIN_FIRMWARE__
-#endif
-
-#if __has_include("../../Config.h")
-  #include "../../Config.h"
-#else
-  #define USE_STD_CONFIGS 1
-#endif
-
 //
 // Prefix header to acquire configurations
 //
-#include <stdint.h>
-
-#ifndef __MARLIN_DEPS__
-  #include "../HAL/platforms.h"
-#endif
-
-#include "../core/macros.h"
-#include "../core/boards.h"
-
-#if USE_STD_CONFIGS
-  #include "../../Configuration.h"
-#endif
-
-#ifdef CUSTOM_VERSION_FILE
-  #if __has_include(STRINGIFY(../../CUSTOM_VERSION_FILE))
-    #include STRINGIFY(../../CUSTOM_VERSION_FILE)
-  #endif
-#endif
-
-#include "Version.h"
-
-#include "Conditionals_axes.h"
-#include "Conditionals_LCD.h"
-#include "Conditionals_etc.h"
-
-#ifndef __MARLIN_DEPS__
-  #include HAL_PATH(.., inc/Conditionals_LCD.h)
-#endif
-
-#include "../core/drivers.h"
-
-#if USE_STD_CONFIGS
-  #include "../../Configuration_adv.h"
-#endif
-
-#include "Conditionals_adv.h"
+#include "Conditionals-1-axes.h"
+#include "Conditionals-2-LCD.h"
+#include "Conditionals-3-etc.h"
+#include "Conditionals-4-adv.h"
 
 #ifndef __MARLIN_DEPS__
   #include HAL_PATH(.., inc/Conditionals_adv.h)

Marlin/src/inc/SanityCheck.h

@@ -27,6 +27,12 @@
  * Test configuration values for errors at compile-time.
  */
 
+//========================================================
+// Get requirements for the benefit of IntelliSense, etc.
+//
+#include "MarlinConfig.h"
+//========================================================
+
 /**
  * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
  */