Skip to content

VRS is a file format optimized to record & playback streams of sensor data, such as images, audio samples, and any other discrete sensors (IMU, temperature, etc), stored in per-device streams of timestamped records.

License

Notifications You must be signed in to change notification settings

SeaOtocinclus/vrs

 
 

Repository files navigation

What is VRS?

VRS is a file format optimized to record & playback streams of sensor data, such as images, audio samples, and any other discrete sensors (IMU, temperature, etc), stored in per-device streams of time-stamped records.

VRS was first created to record images and sensor data from early prototypes of the Quest device, to develop the device’s positional tracking system now known as Insight, and Quest's hand tracking software. It is also the file format used by the Aria glasses.

Main features

  • VRS files contain multiple streams of time-sorted records generated by a set of sensors(camera, IMU, thermometer, GPS, etc), typically one set of sensors per stream.
  • The file and each stream contain an independent set of tags, which are string name/value pairs that describe them.
  • Streams may contain Configuration, State and Data records, each with a timestamp in a common time domain for the whole file.
    Typically, streams contain with one Configuration and one State record, followed one to millions of Data records.
  • Records are structured as a succession of typed content blocks.
    Typical content blocks are metadata, image, audio and custom content blocks.
  • Metadata content blocks contain raw sensor data described once per stream, making the file format very efficient. The marginal cost of adding 1 byte of data to each metadata content block of a stream is 1 byte per record (or less, when lossless compression happens).
  • Records can be losslessly compressed using lz4 or zstd, which can be fast enough to compress while recording on device.
  • Multiple threads can create records concurrently for the same file, without CPU contention.
  • VRS supports huge file size (tested with multi terabytes use cases).
  • VRS supports chunked files: auto-chunking on creation, automated chunk detection for playback.
  • Playback is optimized for timestamp order, which is key for network streaming.
  • Random-access playback is supported.
  • Custom FileHandler implementations can add support for cloud storage streaming.

Documentation

The VRS documentation explains how VRS works. It is complemented by the API documentation, while the sample code and the sample apps below demonstrate in code how to use the API.

We plan on having a VRS Users group dedicated on discussing VRS usage. Stay tuned for details.

Getting Started

To work with VRS files, the vrs open source project provides a C++ library with external open source dependencies such as boost, fmt, lz4, zstd, xxhash, and googletest for unit tests. To build & run VRS, you’ll need a C++17 compiler, such as a recent enough version of clang or Visual Studio.

The simplest way to build VRS is to install the libraries on your system using some package system, such as Brew on macOS, or apt on Ubuntu, and then use cmake to build & test. VRS supports many other platforms such as Windows, Android, iOS and other flavors of Linux, but we currently only provide instructions for macOS, Ubuntu and Windows. You can also build VRS in a container or isolated environment and avoid installing any library on your system.

Instructions (macOS and Ubuntu and container)

Install build tools & libraries (macOS)

  • install Brew, following the instruction on Brew’s web site.
  • install tools & libraries:
    brew install cmake git ninja ccache boost fmt libpng jpeg-turbo libjpeg-dev lz4 zstd xxhash glog googletest
    brew install qt5 portaudio pybind11
    brew install node doxygen
    

Install build tools & libraries (Ubuntu)

These instructions are validated using Ubuntu 20.04, whereas Ubuntu 18.04 doesn't install recent enough versions of cmake, fmt, lz4, and zstd, and is therefore not supported.

  • install tools & libraries:
    sudo apt-get install cmake git ninja-build ccache libgtest-dev libfmt-dev libturbojpeg-dev libpng-dev
    sudo apt-get install liblz4-dev libzstd-dev libxxhash-dev
    sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-date-time-dev
    sudo apt-get install qtbase5-dev portaudio19-dev
    sudo apt-get install npm doxygen
    

Build & run (macOS & Linux)

  • Run cmake:
cmake -S <path_to_vrs_folder> -B <path_to_build_folder> -G Ninja

If you want to build vrsplayer, you need to specify where your installation of Qt is. Where Qt is depends on how you've installed it, using a package manager such as Brew or APT, or downloading it directly from Qt's official website.

To tell cmake where to find Qt, you can either add -DCMAKE_PREFIX_PATH=<path_to_qt> to the cmake command above, or set the environment variable QT_DIR=<path_to_qt> to point to your Qt installation (same path). As a sanity check, you should be able to find the qmake tool at <path_to_qt>/bin/qmake.

Note: We ran into strange build issues when Qt5 and Qt6 were both installed at the same time via Brew on macOS, but uninstalling either fixed the problem.

Qt 5 or Qt 6

At this time, vrsplayer is mostly tested using Qt 5.15.3 LTS, but the code has been updated to build and run with Qt 6.3.0. However, testing with Qt 6 was pretty superficial.

  • Build everything & run tests:
cd <path_to_build_folder>
ninja all
ctest -j8
  • To include VRS in your cmake project:
cd <path_to_build_folder>
ninja install # install VRS on your system as a library cmake can find

In your cmake project (probably one your project's CMakeLists.txt files):

find_package(vrslib REQUIRED) # find the vrs package, break if not found

add_executable(your_app your_app.cpp) # that's your app
target_link_libraries(your_app vrs::vrslib) # so your app can use the vrs includes and libraries

You can then use VRS in your your_app.cpp code:

#include <vrs/RecordFileReader.h>

int main() {
  vrs::RecordFileReader reader;
  if (reader.openFile("myfile.vrs") == 0) {
    do something...
  }
  return 0;
}

Container build & Usage

  • Build VRS in a container and use it on your local data:
cd <path_to_vrs_folder>
podman/docker build . -t vrs
podman/docker run -it --volume <your_local_data>:/data vrs:latest

Build and run using Pixi - macOS/Linux/Windows - experimental

You can build VRS in isolation using pixi on and for your local platform (Linux, macOS Intel/Silicon, Windows with VisualStudio 2019) using the exact same command lines. Pixi is a convenient package and environment manager that simplifies the logic to compile and run projects by defining dependencies and tasks in a single pixi.toml file for all platforms.

  • install pixi following the instructions from its website.
  • compile VRS and run its unit tests (using the defined pixi tasks). Pixi will collect the dependencies for your platform, run cmake, compile and run the unit tests:
    pixi run test
    
  • run the vrs CLI tool in the isolated environment:
    pixi run vrs
    pixi run vrs <i.e. test.vrs> # command line parameters will be forwarded to pixi
    
  • run vrs CLI tool in the manually launch pixi environment:
    pixi shell
    ./build/tools/vrs/vrs
    

Sample Code

  • The sample code demonstrates the basics to record and read a VRS file, then how to work with RecordFormat and DataLayout definitions. The code is extensively documented, functional, compiles but isn’t meant to be run.
  • The sample apps are fully functional apps demonstrate how to create, then read, a VRS file with 3 types of streams.
    • a metadata stream
    • a stream with metadata and uncompressed images
    • a stream with audio images

Tools

The vrs command line tool allows you to inspect and extract data out of VRS files. It can create new VRS files by generating a modified copy of an original recording. It can also extract images, dump metadata for human or computer consumption (json). The vrs command line tool can be found in the cmake build folder at oss/tools/vrs/vrs. It has many options, documented here.

vrsplayer is a GUI tool which can "play" VRS files as multi-stream video files and audio files. It also provides ways to visualize record's metadata as they are played. It can be found in the cmake build folder at oss/tools/vrsplayer/vrsplayer. For more information, see the vrsplayer documentation.

Python interface

pyvrs is a python interface for VRS library. You can install it via pip

pip install vrs

Contributing

We welcome contributions! See CONTRIBUTING for details on how to get started, and our code of conduct.

License

VRS is released under the Apache 2.0 license.

vrsplayer requires an installation of Qt 5.15+ or Qt 6.3+ on your system, maybe using Brew (macOS) or APT (Linux), as demonstrated above, or using an official distribution from Qt's official website. If found, vrsplayer will be built and will link dynamically against the LGPL v3 Qt libraries at runtime.

We provide no pre-built binaries, so you must build vrsplayer from source to use it.

About

VRS is a file format optimized to record & playback streams of sensor data, such as images, audio samples, and any other discrete sensors (IMU, temperature, etc), stored in per-device streams of timestamped records.

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 96.4%
  • CMake 2.0%
  • C 0.8%
  • JavaScript 0.5%
  • CSS 0.1%
  • Python 0.1%
  • Dockerfile 0.1%