Merge pull request #11 from alexbooth92/production-MicroProdN1p1

Fix minor skew in the y `tpc_offset` positions for `NDLAr`

src/LarpixParser/config_repo/ndlar-module.yaml

@@ -32,51 +32,56 @@ birks_Ab: 0.800
 birks_kb: 0.0486 # g/cm2/MeV Amoruso, et al NIM A 523 (2004) 275
 #: Average energy expended per ion pair in LAr in :math:`MeV` from Phys. Rev. A 10, 1452
 W_ion: 23.6e-6
-
 # These TPC offsets are obtained by inspecting
+# 
 # geometry/nd_hall_with_lar_tms_sand_TDR_Production_geometry_v_1.0.3.gdml
 # using the https://github.com/DUNE/dunendggd/blob/master/locateVolume.C
 # tool with paths like, for example,
 # volWorld/rockBox_lv_0/volDetEnclosure_0/volArgonCubeDetector_0/ \
 # volArgonCubeCryostatWithTagger_0/volArgonCubeCryostat_0/volWarmSteel_0/ \
 # volVaporBarrier_0/volNitrogenGap_0/volThermalInsulation_0/volMembrane_0/ \
-# volArgonInner_0/volLArBath_0/volArgonCubeDetector75_0/volNDBucket_8
+# volArgonInner_0/volLArBath_0/volArgonCubeDetector75_0/volNDBucket_0 \
+# volArgonColumn_0/volInnerDetector_0
+#
+# Note that this is the easiest way to get the x and z positions (since 
+# volTPCActive(s) are single TPCs (half a module). The y positions of 
+# volTPCActive(s) and volInnerDetector(s) line up exactly.
 tpc_offsets: # cm
-  - [-300.0000, -60.9290, 465.7559]
-  - [-300.0000, -60.9290, 565.7559]
-  - [-300.0000, -60.9290, 665.7559]
-  - [-300.0000, -60.9290, 765.7559]
-  - [-300.0000, -60.9290, 865.7559]
-  - [-200.0000, -60.9290, 465.7559]
-  - [-200.0000, -60.9290, 565.7559]
-  - [-200.0000, -60.9290, 665.7559]
-  - [-200.0000, -60.9290, 765.7559]
-  - [-200.0000, -60.9290, 865.7559]
-  - [-100.0000, -60.9290, 465.7559]
-  - [-100.0000, -60.9290, 565.7559]
-  - [-100.0000, -60.9290, 665.7559]
-  - [-100.0000, -60.9290, 765.7559]
-  - [-100.0000, -60.9290, 865.7559]
-  - [0.0000, -60.9290, 465.7559]
-  - [0.0000, -60.9290, 565.7559]
-  - [0.0000, -60.9290, 665.7559]
-  - [0.0000, -60.9290, 765.7559]
-  - [0.0000, -60.9290, 865.7559]
-  - [100.0000, -60.9290, 465.7559]
-  - [100.0000, -60.9290, 565.7559]
-  - [100.0000, -60.9290, 665.7559]
-  - [100.0000, -60.9290, 765.7559]
-  - [100.0000, -60.9290, 865.7559]
-  - [200.0000, -60.9290, 465.7559]
-  - [200.0000, -60.9290, 565.7559]
-  - [200.0000, -60.9290, 665.7559]
-  - [200.0000, -60.9290, 765.7559]
-  - [200.0000, -60.9290, 865.7559]
-  - [300.0000, -60.9290, 465.7559]
-  - [300.0000, -60.9290, 565.7559]
-  - [300.0000, -60.9290, 665.7559]
-  - [300.0000, -60.9290, 765.7559]
-  - [300.0000, -60.9290, 865.7559]
+  - [-300.0000, -66.8713, 465.7559]
+  - [-300.0000, -66.8713, 565.7559]
+  - [-300.0000, -66.8713, 665.7559]
+  - [-300.0000, -66.8713, 765.7559]
+  - [-300.0000, -66.8713, 865.7559]
+  - [-200.0000, -66.8713, 465.7559]
+  - [-200.0000, -66.8713, 565.7559]
+  - [-200.0000, -66.8713, 665.7559]
+  - [-200.0000, -66.8713, 765.7559]
+  - [-200.0000, -66.8713, 865.7559]
+  - [-100.0000, -66.8713, 465.7559]
+  - [-100.0000, -66.8713, 565.7559]
+  - [-100.0000, -66.8713, 665.7559]
+  - [-100.0000, -66.8713, 765.7559]
+  - [-100.0000, -66.8713, 865.7559]
+  - [0.0000, -66.8713, 465.7559]
+  - [0.0000, -66.8713, 565.7559]
+  - [0.0000, -66.8713, 665.7559]
+  - [0.0000, -66.8713, 765.7559]
+  - [0.0000, -66.8713, 865.7559]
+  - [100.0000, -66.8713, 465.7559]
+  - [100.0000, -66.8713, 565.7559]
+  - [100.0000, -66.8713, 665.7559]
+  - [100.0000, -66.8713, 765.7559]
+  - [100.0000, -66.8713, 865.7559]
+  - [200.0000, -66.8713, 465.7559]
+  - [200.0000, -66.8713, 565.7559]
+  - [200.0000, -66.8713, 665.7559]
+  - [200.0000, -66.8713, 765.7559]
+  - [200.0000, -66.8713, 865.7559]
+  - [300.0000, -66.8713, 465.7559]
+  - [300.0000, -66.8713, 565.7559]
+  - [300.0000, -66.8713, 665.7559]
+  - [300.0000, -66.8713, 765.7559]
+  - [300.0000, -66.8713, 865.7559]
 
 time_interval: [0, 320.] # us
 drift_length: 50.4 # cm