This crate provides an FFI layer and idiomatic rust wrappers for the excellent meshoptimizer C/C++ library.
When GPU renders triangle meshes, various stages of the GPU pipeline have to process vertex and index data. The efficiency of these stages depends on the data you feed to them; this library provides algorithms to help optimize meshes for these stages, as well as algorithms to reduce the mesh complexity and storage overhead.
Add this to your Cargo.toml:
[dependencies]
meshopt = "0.2.0"This is a single monolithic demo example, which runs nearly the entire feature matrix. In demo, the opt_complete routine is the approach to get 100% optimal GPU performance. Further CPU improvements can be chosen through the various packing and encoding routines.
cargo run --release --example demoThe encoder example shows the minimal calls to perform mesh optimization in a typical game engine pipeline, and serializes the mesh into a format that is compatible with the WebAssembly loader and THREE.js viewer experiment that exists in the meshoptimizer repository.
- https://github.com/zeux/meshoptimizer/blob/master/tools/OptMeshLoader.js
- https://github.com/zeux/meshoptimizer/blob/master/demo/index.html
cargo run --release --example encoder -- --input pirate.obj --output pirate.optmeshWhen optimizing a mesh, you should typically feed it through a set of optimizations (the order is important!):
- Indexing
- Vertex cache optimization
- Overdraw optimization
- Vertex fetch optimization
- Vertex quantization
- (optional) Vertex/index buffer compression
Most algorithms in this library assume that a mesh has a vertex buffer and an index buffer. For algorithms to work well and also for GPU to render your mesh efficiently, the vertex buffer has to have no redundant vertices; you can generate an index buffer from an unindexed vertex buffer or reindex an existing (potentially redundant) index buffer using generate_vertex_remap.
After generating the remap table, you can perform remapping with remap_index_buffer and remap_vertex_buffer.
You can then further optimize the resulting buffers by calling the other functions on them in-place.
When the GPU renders the mesh, it has to run the vertex shader for each vertex; usually GPUs have a built-in fixed size cache that stores the transformed vertices (the result of running the vertex shader), and uses this cache to reduce the number of vertex shader invocations. This cache is usually small, 16-32 vertices, and can have different replacement policies; to use this cache efficiently, you have to reorder your triangles to maximize the locality of reused vertex references; this reordering can be done with optimize_vertex_cache.
After transforming the vertices, GPU sends the triangles for rasterization which results in generating pixels that are usually first ran through the depth test, and pixels that pass it get the pixel shader executed to generate the final color. As pixel shaders get more expensive, it becomes more and more important to reduce overdraw. While in general improving overdraw requires view-dependent operations, this library provides an algorithm to reorder triangles to minimize the overdraw from all directions, which you should run after vertex cache optimization; the routine for this is optimize_overdraw.
When performing the overdraw optimization you have to specify a floating-point threshold parameter. The algorithm tries to maintain a balance between vertex cache efficiency and overdraw; the threshold determines how much the algorithm can compromise the vertex cache hit ratio, with 1.05 meaning that the resulting ratio should be at most 5% worse than before the optimization.
After the final triangle order has been established, we still can optimize the vertex buffer for memory efficiency. Before running the vertex shader GPU has to fetch the vertex attributes from the vertex buffer; the fetch is usually backed by a memory cache, and as such optimizing the data for the locality of memory access is important. You can do this by running this code:
To optimize the index/vertex buffers for vertex fetch efficiency, call optimize_vertex_fetch.
This will reorder the vertices in the vertex buffer to try to improve the locality of reference, and rewrite the indices in place to match; if the vertex data is stored using multiple streams, you should use optimize_vertex_fetch_remap instead. This optimization has to be performed on the final index buffer since the optimal vertex order depends on the triangle order.
Note that the algorithm does not try to model cache replacement precisely and instead just orders vertices in the order of use, which generally produces results that are close to optimal.
To optimize memory bandwidth when fetching the vertex data even further, and to reduce the amount of memory required to store the mesh, it is often beneficial to quantize the vertex attributes to smaller types. While this optimization can technically run at any part of the pipeline (and sometimes doing quantization as the first step can improve indexing by merging almost identical vertices), it generally is easier to run this after all other optimizations since some of them require access to float3 positions.
Quantization is usually domain specific; it's common to quantize normals using 3 8-bit integers but you can use higher-precision quantization (for example using 10 bits per component in a 10_10_10_2 format), or a different encoding to use just 2 components. For positions and texture coordinate data the two most common storage formats are half precision floats, and 16-bit normalized integers that encode the position relative to the AABB of the mesh or the UV bounding rectangle.
The number of possible combinations here is very large but this library does provide the building blocks, specifically functions to quantize floating point values to normalized integers, as well as half-precision floats.
Relevant routines:
quantize_unormquantize_snormquantize_halfquantize_float
After all of the above optimizations, the geometry data is optimal for GPU to consume - however, you don't have to store the data as is. In case storage size or transmission bandwidth is of importance, you might want to compress vertex and index data. While several mesh compression libraries, like Google Draco, are available, they typically are designed to maximize the compression ratio at the cost of preserving the vertex/index order (which makes the meshes inefficient to render on GPU) or decompression performance. Additionally they frequently don't support custom game-ready quantized vertex formats and thus require to re-quantize the data after loading it, introducing extra quantization errors and making decoding slower.
Alternatively you can use general purpose compression libraries like zstd or Oodle to compress vertex/index data - however these compressors aren't designed to exploit redundancies in vertex/index data and as such compression rates can be unsatisfactory.
To that end, this library provides algorithms to "encode" vertex and index data. The result of the encoding is generally significantly smaller than initial data, and remains compressible with general purpose compressors - so you can either store encoded data directly (for modest compression ratios and maximum decoding performance), or further compress it with zstd et al, to maximize compression rate.
To encode, the encode_vertex_buffer and encode_index_buffer routines can be used. The encoded data can be serialized as is, or compressed further. Decoding at runtime can be performed with the decode_vertex_buffer and decode_index_buffer routines.
Note that vertex encoding assumes that vertex buffer was optimized for vertex fetch, and that vertices are quantized; index encoding assumes that the vertex/index buffers were optimized for vertex cache and vertex fetch. Feeding unoptimized data into the encoders will produce poor compression rates. Both codecs are lossless - the only lossy step is quantization that happens before encoding.
Decoding functions are heavily optimized and can directly target write-combined memory; you can expect both decoders to run at 1-2 GB/s on modern desktop CPUs. Compression ratios depend on the data; vertex data compression ratio is typically around 2-4x (compared to already quantized data), index data compression ratio is around 5-6x (compared to raw 16-bit index data). General purpose lossless compressors can further improve on these results.
On most hardware, indexed triangle lists are the most efficient way to drive the GPU. However, in some cases triangle strips might prove beneficial:
- On some older GPUs, triangle strips may be a bit more efficient to render
- On extremely memory constrained systems, index buffers for triangle strips could save a bit of memory
This library provides the stripify routine for converting a vertex cache optimized triangle list to a triangle strip; the inverse can be performed with the unstripify routine.
Typically you should expect triangle strips to have ~50-60% of indices compared to triangle lists (~1.5-1.8 indices per triangle) and have ~5% worse ACMR. Note that triangle strips require restart index support for rendering; using degenerate triangles to connect strips is not supported.
While the only way to get precise performance data is to measure performance on the target GPU, it can be valuable to measure the impact of these optimization in a GPU-independent manner. To this end, the library provides analyzers for all three major optimization routines. For each optimization there is a corresponding analyze function, like analyze_overdraw, that returns a struct with statistics.
analyze_vertex_cache returns vertex cache statistics. The common metric to use is ACMR - average cache miss ratio, which is the ratio of the total number of vertex invocations to the triangle count. The worst-case ACMR is 3 (GPU has to process 3 vertices for each triangle); on regular grids the optimal ACMR approaches 0.5. On real meshes it usually is in [0.5..1.5] range depending on the amount of vertex splits. One other useful metric is ATVR - average transformed vertex ratio - which represents the ratio of vertex shader invocations to the total vertices, and has the best case of 1.0 regardless of mesh topology (each vertex is transformed once).
analyze_vertex_fetch returns vertex fetch statistics. The main metric it uses is overfetch - the ratio between the number of bytes read from the vertex buffer to the total number of bytes in the vertex buffer. Assuming non-redundant vertex buffers, the best case is 1.0 - each byte is fetched once.
analyze_overdraw returns overdraw statistics. The main metric it uses is overdraw - the ratio between the number of pixel shader invocations to the total number of covered pixels, as measured from several different orthographic cameras. The best case for overdraw is 1.0 - each pixel is shaded once.
Note that all analyzers use approximate models for the relevant GPU units, so the numbers you will get as the result are only a rough approximation of the actual performance.
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
- Arseny Kapoulkine (Author of C/C++ library)
- Daniel Collin (Code review)
- Jake Shadle (Code review)
- Thomas Herzog (Contributions)
- Alexandru Ene (Contributions)
- Ralf Jung (Contributions)
- Maxime Rouyrre (Contributions)
- Shiwei Wang (Contributions)
- Simon Chopin (Contributions)
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in this crate by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
Contributions are always welcome; please look at the issue tracker to see what known improvements are documented.
Contribution to the meshopt crate is organized under the terms of the Contributor Covenant, the maintainer of meshopt, @gwihlidal, promises to intervene to uphold that code of conduct.