Imported from rancid-2.3.2a2.tar.gz.

CHANGES

@@ -1,4 +1,20 @@
-2.3.2a
+2.3.2
+	Add a MAILHEADERS configuration variable for user-defined mail headers 
+
+	rancid: match HSRP group numbers greater than 1 char wide - Ed Ravin
+
+	nrancid: filter radius secrest - Jee Kay
+
+	*rancid: collapse the two command list definitions to an array of
+	hashrefs and build the lists from it - Ed Ravin
+
+	*login: ignore rsh on platforms that do not support it and on those
+	that do (eg: cisco), skip rsh for interactive and script (-s) logins.
+
+	add MAX_ROUNDS rancid.conf knob - Mardechai Abzug
+
+	control_rancid: fix adminmailrcpt default - Danny Thomas
+
 	rancid: correct handling of SNMPv3 host configs - Patrick Adlam
 
 	rancid: filter nv_hdr file seen on sup720 - Bill Ouchark

Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.4 from Makefile.am.
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -59,6 +59,12 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	install-recursive installcheck-recursive installdirs-recursive \
 	pdf-recursive ps-recursive uninstall-info-recursive \
 	uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 am__installdirs = "$(DESTDIR)$(pkgdatadir)"
 pkgdataDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(pkgdata_DATA)
@@ -155,6 +161,8 @@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build_alias = @build_alias@
 datadir = @datadir@
@@ -233,15 +241,15 @@ install-pkgdataDATA: $(pkgdata_DATA)
 	test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
 	@list='$(pkgdata_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 	  $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
 	done
 
 uninstall-pkgdataDATA:
 	@$(NORMAL_UNINSTALL)
 	@list='$(pkgdata_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
 	done
@@ -253,7 +261,13 @@ uninstall-pkgdataDATA:
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
 $(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -265,15 +279,21 @@ $(RECURSIVE_TARGETS):
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
 mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	case "$@" in \
 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
@@ -294,7 +314,7 @@ maintainer-clean-recursive:
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -328,7 +348,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	fi; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && \
+	    test ! -f $$subdir/TAGS || \
 	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
@@ -339,7 +359,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -z "$$unique" && unique=$$empty_fix; \
+	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	    $$tags $$unique; \
 	fi
@@ -396,15 +416,17 @@ distdir: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || mkdir "$(distdir)/$$subdir" \
+	    || $(mkdir_p) "$(distdir)/$$subdir" \
 	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 	    (cd $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="../$(top_distdir)" \
-	        distdir="../$(distdir)/$$subdir" \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -415,15 +437,15 @@ distdir: $(DISTFILES)
 	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
 
 dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
 dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
 
 dist-shar: distdir
@@ -436,7 +458,7 @@ dist-zip: distdir
 	$(am__remove_distdir)
 
 dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
@@ -445,11 +467,11 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
@@ -533,7 +555,7 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -597,14 +619,14 @@ uninstall-info: uninstall-info-recursive
 	dist-tarZ dist-zip distcheck distclean distclean-generic \
 	distclean-recursive distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-pkgdataDATA install-strip installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic maintainer-clean-recursive \
-	mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
-	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
-	uninstall-info-am uninstall-pkgdataDATA
+	install install-am install-data install-data-am \
+	install-data-hook install-exec install-exec-am install-info \
+	install-info-am install-man install-pkgdataDATA install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am uninstall-pkgdataDATA
 
 
 @SET_MAKE@

Todo

@@ -1,3 +1,4 @@
+- jrancid doesnt use $timeo
 - lg.conf(5) needs the query stuff documented.
 - subversion support in addition to CVS
 - configure OLDTIME per-group
@@ -53,7 +54,7 @@
   this is clouded by the UI mess.
 - rancid needs to treat the 3600s like the 7Ks and 12Ks...
   Also, need to allow 12012s, and force 700s to not be treated like 7Ks.
-- clogin/jlogin rsh is munged
+- clogin rsh is munged
 - LG should sort routers
 - LG {requested} command additions
 	- show controllers T3 (data)