A toy operating system which supports NVDIMM natively.
Check the installation (below is an example output):
$ cargo --version
cargo 1.46.0 (149022b1d 2020-07-17)
Then, install nightly toolchain and cargo-xbuild for cross compiling.
rustup toolchain install nightly-x86_64-unknown-linux-gnu
rustup component add rust-src
brew install wget cmake qemu llvm dosfstools
sudo apt install wget cmake qemu-system-x86 clang-8 lld-8 libc++-8-dev libc++abi-8-dev clang-format
Move to the root of this source tree. Then:
make tools
make prebuilt
make
This repository contains OVMF binary for UEFI emulation.
make run
You can connect serial console using telnet
telnet localhost 1235
Flags can be specified for make run command. Please check qemu.mk for more details.
Example:
make run GUI=n GDB=nosuspend
GUI=y: Enable GUI=n: Disable GUI (enable VNC server)
GDB=n: Disable gdb server in QEMU=suspend_on_boot: Enable gdb server and wait for a connection on startup=nosuspend: Enable gdb server and startup the machine normally without waiting for a gdb connection
make run boots liumOS on QEMU with a tap interface on Linux host.
To avoid running QEMU with sudo, you need to setup a tap interface in advance.
sudo ip tuntap add dev tap0 mode tap user $USER
sudo ip link set dev tap0 master br0
sudo ip link set dev tap0 up
example output with bridge br0 connected to eno1
$ ip a | grep -e br0 -e tap0
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP group default qlen 1000
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
inet 10.10.10.93/24 brd 10.10.10.255 scope global dynamic br0
6: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br0 state UP group default qlen 1000
network:
ethernets:
eno1:
dhcp4: false
dhcp6: false
bridges:
br0:
interfaces: [ eno1 ]
dhcp4: true
version: 2
Contributions are welcome! Please create a pull request to this repository.
Before submitting a PR, please check the test results with make test.
make commit does all the presubmit checks and creates a commit automatically (recommended!)
If you found any problems or questions, please let us know through Issues on GitHub.
