ssh-hardening (Chef cookbook)

Description

This cookbook provides secure ssh-client and ssh-server configurations. This cookbook does not provide capabilities for management of users and/or ssh keys, please use other cookbooks for that.

Requirements

Chef >= 12.5.1

Platform

Debian 7, 8
Ubuntu 14.04, 16.04
RHEL 6, 7
CentOS 6, 7
Oracle Linux 6, 7
Fedora 24, 25
OpenSuse Leap 42

Attributes

Below you can find the attribute documentation and their default values.

Notice: Some of attribute defaults of this cookbook are set in the recipes. You should use a higher attribute precedence level for overriding of such attributes. Such attributes are flagged with #override attribute# in the list below. Example for overriding a such attribute:

override['ssh-hardening']['ssh']['server']['listen_to'] = node['ipaddress']

['ssh-hardening']['network']['ipv6']['enable'] - false. Set to true if IPv6 is needed
['ssh-hardening']['ssh']['ports'] - 22. Ports to which ssh-server should listen to and ssh-client should connect to
['ssh-hardening']['ssh'][{'client', 'server'}]['kex'] - nil to calculate best key-exchange (KEX) based on server version, otherwise specify a string of Kex values
['ssh-hardening']['ssh'][{'client', 'server'}]['mac'] - nil to calculate best Message Authentication Codes (MACs) based on server version, otherwise specify a string of Mac values
['ssh-hardening']['ssh'][{'client', 'server'}]['cipher'] - nil to calculate best ciphers based on server version, otherwise specify a string of Cipher values
['ssh-hardening']['ssh'][{'client', 'server'}]['cbc_required'] - false. Set to true if CBC for ciphers is required. This is usually only necessary, if older M2M mechanism need to communicate with SSH, that don't have any of the configured secure ciphers enabled. CBC is a weak alternative. Anything weaker should be avoided and is thus not available.
['ssh-hardening']['ssh'][{'client', 'server'}]['weak_hmac'] - false. Set to true if weaker HMAC mechanisms are required. This is usually only necessary, if older M2M mechanism need to communicate with SSH, that don't have any of the configured secure HMACs enabled.
['ssh-hardening']['ssh'][{'client', 'server'}]['weak_kex'] - false. Set to true if weaker Key-Exchange (KEX) mechanisms are required. This is usually only necessary, if older M2M mechanism need to communicate with SSH, that don't have any of the configured secure KEXs enabled.
['ssh-hardening']['ssh']['client']['remote_hosts'] - [] - one or more hosts, to which ssh-client can connect to.
['ssh-hardening']['ssh']['client']['password_authentication'] - false. Set to true if password authentication should be enabled.
['ssh-hardening']['ssh']['client']['roaming'] - false. Set to true if experimental client roaming should be enabled. This is known to cause potential issues with secrets being disclosed to malicious servers and defaults to being disabled.
['ssh-hardening']['ssh']['client']['extras'] - {}. Add extra configuration options, see below for details
['ssh-hardening']['ssh']['server']['host_key_files'] - nil to calculate best hostkey configuration based on server version, otherwise specify an array with file paths (e.g. /etc/ssh/ssh_host_rsa_key)
['ssh-hardening']['ssh']['server']['dh_min_prime_size'] - 2048 - Minimal acceptable prime length in bits in /etc/ssh/moduli. Primes below this number will get removed. (See this for more information and background)
['ssh-hardening']['ssh']['server']['dh_build_primes'] - false - If own primes should be built. This rebuild happens only once and takes a lot of time (~ 1.5 - 2h on the modern hardware for 4096 length).
['ssh-hardening']['ssh']['server']['dh_build_primes_size'] - 4096 - Prime length which should be generated. This option is only valid if dh_build_primes is enabled.
['ssh-hardening']['ssh']['server']['listen_to'] #override attribute# - one or more ip addresses, to which ssh-server should listen to. Default is to listen on all interfaces. It should be configured for security reasons!
['ssh-hardening']['ssh']['server']['allow_root_with_key'] - false to disable root login altogether. Set to true to allow root to login via key-based mechanism
['ssh-hardening']['ssh']['server']['allow_tcp_forwarding'] - false. Set to true to allow TCP Forwarding
['ssh-hardening']['ssh']['server']['allow_agent_forwarding'] - false. Set to true to allow Agent Forwarding
['ssh-hardening']['ssh']['server']['allow_x11_forwarding'] - false. Set to true to allow X11 Forwarding
['ssh-hardening']['ssh']['server']['use_pam'] - true. Set to false to disable the pam authentication of sshd
['ssh-hardening']['ssh']['server']['challenge_response_authentication'] - false. Set to true to enable challenge response authentication.
['ssh-hardening']['ssh']['server']['deny_users'] - [] to configure DenyUsers, if specified login is disallowed for user names that match one of the patterns.
['ssh-hardening']['ssh']['server']['allow_users'] - [] to configure AllowUsers, if specified, login is allowed only for user names that match one of the patterns.
['ssh-hardening']['ssh']['server']['deny_groups'] - [] to configure DenyGroups, if specified, login is disallowed for users whose primary group or supplementary group list matches one of the patterns.
['ssh-hardening']['ssh']['server']['allow_groups'] - [] to configure AllowGroups, if specified, login is allowed only for users whose primary group or supplementary group list matches one of the patterns.
['ssh-hardening']['ssh']['server']['print_motd'] - false. Set to true to enable printing of the MOTD
['ssh-hardening']['ssh']['server']['print_last_log'] - false. Set to true to enable printing of last login information
['ssh-hardening']['ssh']['server']['banner'] - nil. Set a path like '/etc/issue.net' to enable the banner
['ssh-hardening']['ssh']['server']['os_banner'] - false to disable version information during the protocol handshake (debian family only). Set to true to enable it
['ssh-hardening']['ssh']['server']['use_dns'] - nil to use the openssh default. Set to true or false to enable/disable the DNS lookup and check of remote host
['ssh-hardening']['ssh']['server']['use_privilege_separation'] - nil to calculate the best value based on server version, otherwise set true or false
['ssh-hardening']['ssh']['server']['login_grace_time'] - 30s. Time in which the login should be successfully, otherwise the user is disconnected.
['ssh-hardening']['ssh']['server']['max_auth_tries'] - 2. The number of authentication attempts per connection
['ssh-hardening']['ssh']['server']['max_sessions'] - 10 The number of sessions per connection
['ssh-hardening']['ssh']['server']['password_authentication'] - false. Set to true if password authentication should be enabled
['ssh-hardening']['ssh']['server']['log_level'] - verbose. The log level of sshd. See LogLevel in man 5 sshd_config for possible values.
['ssh-hardening']['ssh']['server']['sftp']['enable'] - false. Set to true to enable the SFTP feature of OpenSSH daemon
['ssh-hardening']['ssh']['server']['sftp']['group'] - sftponly. Sets the Match Group option of SFTP to allow SFTP only for dedicated users
['ssh-hardening']['ssh']['server']['sftp']['chroot'] - /home/%u. Sets the directory where the SFTP user should be chrooted
['ssh-hardening']['ssh']['server']['sftp']['password_authentication'] - false. Set to true if password authentication should be enabled
['ssh-hardening']['ssh']['server']['authorized_keys_path'] - nil. If not nil, full path to an authorized keys folder is expected
['ssh-hardening']['ssh']['server']['extras'] - {}. Add extra configuration options, see below for details

Usage

Add the recipes to the run_list:

"recipe[ssh-hardening]"

This will install ssh-server and ssh-client. You can alternatively choose only one via:

"recipe[ssh-hardening::server]"
"recipe[ssh-hardening::client]"

Configure attributes:

"ssh-hardening": {
  "ssh" : {
    "server" : {
      "listen_to" : "10.2.3.4"
    }
  }
}

The default value for listen_to is 0.0.0.0. It is highly recommended to change the value.

SFTP

To enable the SFTP configuration add one of the following recipes to the run_list:

"recipe[ssh-hardening]"
or
"recipe[ssh-hardening::server]"

Configure attributes:

"ssh-hardening": {
  "ssh" : {
    "server": {
      "sftp" : {
      "enable" : true,
      "chroot" : "/home/sftp/%u",
      "group"  : "sftusers"
    }
    }
  }
}

This will enable the SFTP Server and chroot every user in the sftpusers group to the /home/sftp/%u directory.

Extra Configuration Options

Extra configuration options can be appended to the client or server configuration files. This can be used to override statically set values, or add configuration options not otherwise available via attributes.

The syntax is as follows:

# => Extra Server Configuration
default['ssh-hardening']['ssh']['server']['extras'].tap do |extra|
  extra['#Some Comment'] = 'Heres the Comment'
  extra['AuthenticationMethods'] =  'publickey,keyboard-interactive'
end

# => Extra Client Configuration
default['ssh-hardening']['ssh']['client']['extras'].tap do |extra|
  extra['PermitLocalCommand'] = 'no'
  extra['Tunnel'] =  'no'
end

Local Testing

Please install chef-dk, VirtualBox or VMware Workstation and Vagrant.

Linting is checked with rubocop and foodcritic:

$ chef exec rake lint
.....

Unit/spec tests are done with chefspec:

$ chef exec rake spec
.....

Integration tests are done with test-kitchen and inspec:

$ chef exec rake kitchen
.....
# or you can use the kitchen directly
$ kitchen test

FAQ / Pitfalls

I can't log into my account. I have registered the client key, but it still doesn't let me it.

If you have exhausted all typical issues (firewall, network, key missing, wrong key, account disabled etc.), it may be that your account is locked. The quickest way to find out is to look at the password hash for your user:

sudo grep myuser /etc/shadow

If the hash includes an !, your account is locked:

myuser:!:16280:7:60:7:::

The proper way to solve this is to unlock the account (passwd -u myuser). If the user doesn't have a password, you should can unlock it via:

usermod -p "*" myuser

Alternatively, if you intend to use PAM, you enabled it via ['ssh-hardening']['ssh']['use_pam'] = true. PAM will allow locked users to get in with keys.

Why doesn't my application connect via SSH anymore?

Always look into log files first and if possible look at the negotation between client and server that is completed when connecting.

We have seen some issues in applications (based on python and ruby) that are due to their use of an outdated crypto set. This collides with this hardening module, which reduced the list of ciphers, message authentication codes (MACs) and key exchange (KEX) algorithms to a more secure selection.

If you find this isn't enough, feel free to activate the attributes cbc_requires for ciphers, weak_hmac for MACs and weak_kexfor KEX in the namespaces ['ssh-hardening']['ssh']['client'] or ['ssh-hardening']['ssh']['server'] based on where you want to support them.

Why can't I log to the SFTP server after I added a user to my SFTP group?

This is a ChrootDirectory ownership problem. sshd will reject SFTP connections to accounts that are set to chroot into any directory that has ownership/permissions that sshd considers insecure. sshd's strict ownership/permissions requirements dictate that every directory in the chroot path must be owned by root and only writable by the owner. So, for example, if the chroot environment is /home must be owned by root.

See https://wiki.archlinux.org/index.php/SFTP_chroot

Contributors + Kudos

Dominik Richter arlimus
Christoph Hartmann chris-rock
Bernhard Weisshuhn (a.k.a. bernhorst) bkw
Patrick Munch atomic111
Edmund Haselwanter ehaselwanter
Dana Merrick dmerrick
Anton Rieder aried3r
Trent Petersen Rockstar04
Petri Sirkkala sirkkalap
Jan Klare jklare
Zac Hallett zhallett
Petri Sirkkala sirkkalap
stribika

This cookbook is mostly based on guides by:

Thanks to all of you!!

Contributing

See contributor guideline.

License and Author

Author:: Dominik Richter [email protected]
Author:: Deutsche Telekom AG

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Name		Name	Last commit message	Last commit date
Latest commit History 504 Commits
attributes		attributes
files/default		files/default
libraries		libraries
recipes		recipes
spec		spec
templates/default		templates/default
test		test
.gitignore		.gitignore
.kitchen.dokken.yml		.kitchen.dokken.yml
.kitchen.yml		.kitchen.yml
.rspec		.rspec
.rubocop.yml		.rubocop.yml
.travis.yml		.travis.yml
Berksfile		Berksfile
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
Gemfile		Gemfile
Guardfile		Guardfile
LICENSE		LICENSE
README.md		README.md
Rakefile		Rakefile
chefignore		chefignore
metadata.rb		metadata.rb

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

ssh-hardening (Chef cookbook)

Description

Requirements

Platform

Attributes

Usage

SFTP

Extra Configuration Options

Local Testing

FAQ / Pitfalls

Contributors + Kudos

Contributing

License and Author

About

Releases

Packages

Languages

License

iennae/chef-ssh-hardening

Folders and files

Latest commit

History

Repository files navigation

ssh-hardening (Chef cookbook)

Description

Requirements

Platform

Attributes

Usage

SFTP

Extra Configuration Options

Local Testing

FAQ / Pitfalls

Contributors + Kudos

Contributing

License and Author

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages